Hybrid composite materials can successfully solve the problems of reliability, durability, and extended functionality of products, components, and details, which operate under conditions of multifactorial influences (temperature, force, and deformation). The authors have developed a hybrid composite high-entropy AlCoCrCuFeNi material and ceramic cBNCoMo(B4CCoMo) layer. The formation of hybrid composites was carried out using new technology. This technology includes high-energy machining, high-velocity oxygen-fuel spraying in a protective environment, high-temperature thermomechanical treatment, and heat treatment. The use of the developed technology made it possible to increase the adhesive strength of the composite layers from 68 to 192 MPa. The authors performed an assessment of the structural parameters of the composite layers. The assessment showed that the composite layers had a nanocrystalline structure. The research included mechanical tests of the hybrid composites Hastelloy X (NiCrFeMo)—AlCoCrCuFeNi—cBNCoMo and Hastelloy X (NiCrFeMo)—AlCoCrCuFeNi—B4CCoMo for cyclic durability (fatigue mechanical tests) and friction wear. The use of surface-layered materials AlCoCrCuFeNi—cBNCoMo and AlCoCrCuFeNi—B4CCoMo in the composition of hybrid composites significantly increased cyclic durability. The use of surface-layered materials in the composition of hybrid composites made it possible to reduce wear intensity. The test results show that the developed composites are promising for use in various industries (including oil and gas), where high strength and wear resistance of materials are required.
Hybrid layered reinforced materials are able to increase the reliability, durability, and expand the functionality of high-temperature components in supercritical and ultra-supercritical power plants and in oil, gas, and petrochemical equipment operating under conditions with multifactorial influences (temperature, force, deformation). As a result of this research, surface reinforced ceramic composite materials with a gradient distribution of properties have been developed. These materials include thermal barrier layers (Gd2O3-Yb2O3-Y2O3-ZrO2) and Ni-based layers reinforced with ceramic carbide and oxide particles. They are strong, have a high heat and wear resistance, and provide the specified functional and mechanical properties. The formation technology for the hybrid composites has also been developed. This technology includes the mechanical alloying of powder compositions, which is followed by vacuum plasma spraying. The structure of the powder compositions and composite layers, the density of the obtained composite materials, and the heat and wear resistance of the composites have also been investigated. The microhardness of the alloy layers of the hybrid composite materials Hastelloy X–GYYZO–material 1 and Hastelloy X–GYYZO–material 2 was as follows: super alloy Hastelloy X, HV0.2 = 3.8–3.95 GPa; layer GYYZO, HV0.3 = 16.1–16.7 GPa; layer material 1, HV0.3 =18.3–18.8 GPa; layer material 2, HV0.3 =19.1–19.6 GPa. The influence of the refractory phase of HfC and TaC on the strength of the composites was studied. It was found that the maximum strength (710–715 MPa) in the composites Hastelloy X—GYYZO—material 1 and Hastelloy X–GYYZO–material 2 is achieved with a content of HfC and TaC–27–28%.
30 March 2014 in Advanced Engineering Research (Rostov-on-Don)
The methods of calculating the location radii of the gear chain pivot locus on the wraps of involute sprockets are suggested. The methods involve a step - by - step “placing” of the chain loops on the sprocket. To determine the chain joints location, surface equidistance of the operating and back tooth profiles which represent the c hain pivot locus upon their contact with the sprocket tooth profiles is used. The location radii of the pivot locus o n the involute sprocket wrap can be defined through the predete r mined position of the first joint, the known length values of the gear chain contact link pitches, and the slack side pretension. The study results allow presenting t he methods of calculating t he gear chain pivot l o cus on the wraps of involute sprockets and the mathematical model algorithm of the chain gearing with involute sprockets. The methods can be used to determine setting of the chain belt with toothed chain providing the minimal we ar - out of the gearing elements.
The problem of increasing heat resistance and corrosion and erosion resistance of gas turbine units in compressor stations was solved through the development of new layered materials containing nanostructured grains. The authors carried out a destruction analysis of gas turbine units in compressor stations. It was shown that after 10–30,000 h of operation, the greatest damage occurred when the gas turbine operated in dusty environments at high temperatures (or in air environments with a high salt content). The developed layered composites include the thermal barrier and functional reinforced nanostructured layers consisting of refractory carbides and oxides. This paper describes the destruction mechanism of gas turbine units under the influence of high-temperature aggressive environments. As a result, a new formation technology for reinforced nanostructured layered composites has been developed. The developed composition makes it possible to increase the heat resistance of materials by approximately 10 times. This significantly increases the reliability and durability of gas turbine units in compressor stations. The structural and mechanical parameters of the layered nanostructured heat-resistant composites have been studied.