Hybrid layered reinforced materials are able to increase the reliability, durability, and expand the functionality of high-temperature components in supercritical and ultra-supercritical power plants and in oil, gas, and petrochemical equipment operating under conditions with multifactorial influences (temperature, force, deformation). As a result of this research, surface reinforced ceramic composite materials with a gradient distribution of properties have been developed. These materials include thermal barrier layers (Gd2O3-Yb2O3-Y2O3-ZrO2) and Ni-based layers reinforced with ceramic carbide and oxide particles. They are strong, have a high heat and wear resistance, and provide the specified functional and mechanical properties. The formation technology for the hybrid composites has also been developed. This technology includes the mechanical alloying of powder compositions, which is followed by vacuum plasma spraying. The structure of the powder compositions and composite layers, the density of the obtained composite materials, and the heat and wear resistance of the composites have also been investigated. The microhardness of the alloy layers of the hybrid composite materials Hastelloy X–GYYZO–material 1 and Hastelloy X–GYYZO–material 2 was as follows: super alloy Hastelloy X, HV0.2 = 3.8–3.95 GPa; layer GYYZO, HV0.3 = 16.1–16.7 GPa; layer material 1, HV0.3 =18.3–18.8 GPa; layer material 2, HV0.3 =19.1–19.6 GPa. The influence of the refractory phase of HfC and TaC on the strength of the composites was studied. It was found that the maximum strength (710–715 MPa) in the composites Hastelloy X—GYYZO—material 1 and Hastelloy X–GYYZO–material 2 is achieved with a content of HfC and TaC–27–28%.
The article considers a wind-solar generator based on special electric machines for power supply of various objects. The subject of this article is a wind-solar generator intended for simultaneous conversion of solar energy (using a photoelectric converter) and wind into electrical energy according to end-user performance (U = 380 V, f = 50 Hz). This work was carried out within the research conducted at Kuban State Technological University in the field of renewable energy sources under the guidance of professor B. Gaitov, the Honored worker of science and technology of the Russian Federation. The purpose of this work is to study the transient processes of a wind-solar generator. The results of this work is the mathematical model created in the "Matlab" software that allows one to take into account the electromechanical and electromagnetic processes, which take place in the wind-solar generator. The authors also formed oscillograms of the transient processes of the output voltage of the wind-solar generator when the input quantities change).
The problem of increasing heat resistance and corrosion and erosion resistance of gas turbine units in compressor stations was solved through the development of new layered materials containing nanostructured grains. The authors carried out a destruction analysis of gas turbine units in compressor stations. It was shown that after 10–30,000 h of operation, the greatest damage occurred when the gas turbine operated in dusty environments at high temperatures (or in air environments with a high salt content). The developed layered composites include the thermal barrier and functional reinforced nanostructured layers consisting of refractory carbides and oxides. This paper describes the destruction mechanism of gas turbine units under the influence of high-temperature aggressive environments. As a result, a new formation technology for reinforced nanostructured layered composites has been developed. The developed composition makes it possible to increase the heat resistance of materials by approximately 10 times. This significantly increases the reliability and durability of gas turbine units in compressor stations. The structural and mechanical parameters of the layered nanostructured heat-resistant composites have been studied.
The article discusses the advisability of using machine translation systems when training single-discipline specialists, conducts a small-scale study of the result of the work of one of the most popular free systems “Google Translate”, identifies typical errors and provides ways to correct them when processing such translations manually. Illustrative material is taken from the works of senior students majoring in 08.03.01 “Construction (Industrial and Civil Construction)” while studying the discipline “Practicum in the Field of Professional Communication”.
The engine-separator of combined design is considered in the article. The subject of this article is temperature field investigation of the engine-separator with a combined design. The purpose of this paper is to review and analyze the application of an oil separation unit based on a separator engine at oil and gas facilities. The article describes a method for oil separation based on the use of a combined engineseparator design; the use of losses in the rotor, which is the separator drum, as "heating" losses heat during separation of product in the separator drum; the use of the energy losses released by separator engine core and stator winding for preheating the separation product. The authors studied the questions connected with construction of a temperature field of the machine in order to improve the machine design and reduce the power consumption.
Reduced service life of components, units, and assemblies operating under extreme conditions, characterized by high cyclically varying stresses, remains a significant issue. The present work addresses this problem by enhancing the reliability and cyclic durability of materials through electric pulse force intensification. As a result of the study, appropriate equipment for electric pulse force intensification was selected. A technology for electric pulse force intensification was developed, and process parameters such as current strength, current density, and pulse duration were optimized. Using statistical analysis of experimental data, 3D models were created, and empirical mathematical equations were derived to describe the influence of key process parameters on the cyclic durability of materials. The geometric parameters of cracks were examined during cyclic durability tests under bending with low-cycle loading, both before and after electric pulse activation. Using SEM, we studied the material structure in the crack region, revealing that pulsed electric current enhances cyclic life by “partial healing” of structural defects. Statistical modeling produced empirical equations expressing the relationships between various characteristics. The mechanism of defect partial healing in materials subjected to electric pulses was described, and the impact of electric pulse activation on samples was evaluated. This demonstrated the potential to fully restore a component’s service life after cyclic loading at 80% of its ultimate limit.