The synthesis of zeolites from natural aluminosilicate minerals has drawn extensive attention due to its significant utility in greening the zeolite manufacturing process. In this study, pure-phase NaX zeolite was synthesized via a low-temperature hydrothermal method, utilizing natural, low-quality attapulgite clay as the raw material. Acidified clay was fully activated through alkali fusion at 200 °C, and the impact of alkali fusion temperature, H2O/Na2O ratio, aging temperature, and crystallization time on the resulting crystalline NaX zeolite was investigated. The optimal conditions for obtaining pure NaX zeolite were determined to be alkali melting at 200 °C for 4 h, an H2O/Na2O ratio of 50, aging at 40 °C, and a crystallization period of 11 h at 90 °C. With a large BET surface area of 328.43 m2/g, the obtained NaX zeolite was used to adsorb Pb2+ from wastewater with a removal rate of 95%. This research provides a valuable method for the extensive and efficient utilization of low-grade natural attapulgite clay. Moreover, this is the first report on the synthesis of pure-phase NaX zeolite using only low-quality natural attapulgite clay as raw material through an atmospheric pressure water bath method.
Since indoor visible light communication (VLC) systems can offer several potential advantages over their radio frequency and infrared counterparts, there has been a growing interest in VLC systems. Influenced by the complicated optical propagation environment, multipath effect existed which may result in intersymbol interference (ISI). Therefore, the bit error ratio (BER) performance is degraded excessively due to the effects of ISI. In this paper, we evaluate the performance of a nonlinear MAP (maximum a-posteriori probability) equalizer in indoor VLC environment. Moreover, Forward error correction (FEC) coding and interleaving is used. It will be shown that MAP equalization is well behaved in VLC systems. Besides, the systems with encoder and interleaver provide notable performance gain at the expense of higher computational complexity.
Ultramarine is a highly favored blue inorganic pigment. It is non-toxic with a deep color and widely used in architecture, plastics, coatings, fine arts and cosmetics. In this study, ultramarine pigment was synthesized using palygorskite, anhydrous sodium carbonate and sulfur as the raw materials through the high-temperature solid-phase method. The incorporation of palygorskite into the synthesis process greatly improves the reaction efficiency and reduces the amount of sulfur. When the mass ratio of palygorskite, anhydrous sodium carbonate and sulfur is 2:6:3, the resulting ultramarine pigment exhibits optimal chrominance. Notably, this sulfur ratio is substantially lower than that used in conventional processes, highlighting the efficiency and potential environmental benefits of this approach. The XRD, FT-IR, UV visible spectroscopy and SEM reveal that the synthetically produced blue pigments possess a sodalite structure, incorporating S3− and S2− radicals. Stability assessments indicated a marked improvement in the acid resistance of the dark blue pigment upon modification with dodecyltrimethoxysilane, with no notable color degradation observed in either neutral or alkaline conditions. The refined formulation and synthesis process not only optimize the production of ultramarine pigment, but also pave the way for enhanced durability and broader application prospects in various industries.