Attapulgite (APT) is widely used in wastewater treatment due to its exceptional adsorption and colloidal properties, as well as its cost-effectiveness and eco-friendliness. However, low-grade APT generally limits its performance. Here, a colloid mill-assisted ultrasonic-fractional centrifugal purification method was developed to refine low-grade APT. This process successfully separated and removed impurity minerals such as quartz and dolomite from the raw ore, resulting in a refined APT purity increase from 16.9% to 60% with a specific surface area of 135.5 m2∙g−1. Further modifying of the refined APT was carried out through the hydrothermal method using varying dosages of cetyltrimethylammonium chloride (CTAC), resulting in the production of four different APT adsorbents denoted as QAPT-n (n = CTAC mole number) ranging from 0.5 to 5 mmol. Using Congo red (CR) as the target pollutant, the QAPT-5 sample exhibited the best adsorption capacity with the maximum quantity of 1652.2 mg∙g−1 in a neutral solution at 30 °C due to the highest surface charge (zeta potential = 8.25 mV). Moreover, the QAPT-5 pellets (~2.0 g adsorbent) shaped by the alginate-assisted molding method removed more than 96% of 200 mL aqueous solution containing 200 mg∙L−1 CR and maintained this efficiency in 10 adsorption–elution cycles, which exhibited the promising practical application.
Ultramarine is a highly favored blue inorganic pigment. It is non-toxic with a deep color and widely used in architecture, plastics, coatings, fine arts and cosmetics. In this study, ultramarine pigment was synthesized using palygorskite, anhydrous sodium carbonate and sulfur as the raw materials through the high-temperature solid-phase method. The incorporation of palygorskite into the synthesis process greatly improves the reaction efficiency and reduces the amount of sulfur. When the mass ratio of palygorskite, anhydrous sodium carbonate and sulfur is 2:6:3, the resulting ultramarine pigment exhibits optimal chrominance. Notably, this sulfur ratio is substantially lower than that used in conventional processes, highlighting the efficiency and potential environmental benefits of this approach. The XRD, FT-IR, UV visible spectroscopy and SEM reveal that the synthetically produced blue pigments possess a sodalite structure, incorporating S3− and S2− radicals. Stability assessments indicated a marked improvement in the acid resistance of the dark blue pigment upon modification with dodecyltrimethoxysilane, with no notable color degradation observed in either neutral or alkaline conditions. The refined formulation and synthesis process not only optimize the production of ultramarine pigment, but also pave the way for enhanced durability and broader application prospects in various industries.
Palygorskite (Pal) shows great potential for physical, chemical and biological uses due to its colloidal, catalytic and adsorption properties. Pal mines, however, are facing the challenge of low-grade materials (5–15%), making it difficult to use Pal in emerging fields such as new materials, environmental protection and health. Therefore, there is an urgent need to develop an efficient method for separating and purifying Pal to obtain high purity levels. Hence, we have developed a dispersant-assisted rotating liquid film reactor separation strategy based on sodium hexametaphosphate as the dispersant. This strategy utilizes the double electron layer of Pal and the density difference between impurities to achieve effective disaggregation and purification of Pal bundles through the promotion of repulsive driving effects. Under optimal conditions, the purity of Pal can be increased from less than 10% to over 80%. This research presents a novel approach to the efficient refining of low-grade Pal. The crudely purified Pal’s adsorption capacity for methylene blue increased from 84.2 to 256.4 mg g–1.