A small amount of Co was added to the Fe88Ce7B5 glass forming alloy for the possibility of improving its glass formability and magnetocaloric effect. The Curie temperature of the amorphous Fe88-xCe7B5Cox (x = 0, 1, 2, 3) ribbons increases linearly with the Co content, while the maximum magnetic entropy change (−ΔSmpeak) increases to 3.89 J/(kg × K) under 5 T at x = 1 and subsequently decreases with further Co addition. The mechanism for the influence of Co addition on magnetic properties and the magnetocaloric effect of the amorphous alloys was investigated. Furthermore, a flattened −ΔSm profile was designed in the amorphous laminate composed of the amorphous Fe88-xCe7B5Cox (x = 0, 1, 2) ribbons. The high average −ΔSm from ~287 K to ~320 K indicates the potential application perspective of the amorphous hybrid as a magnetic refrigerant of a domestic refrigerator.
The novel Fe87Ce13−xBx (x = 5, 6, 7) metallic glass (MG) ribbons were fabricated in this work. The compositional dependence of glass forming ability (GFA), magnetic and magnetocaloric properties of these ternary MGs, and the mechanism involved was investigated. The GFA and Curie temperature (Tc) of the MG ribbons were found to improve with the boron content, and the peak value of magnetic entropy change (−ΔSmpeak) reaches a maximum of 3.88 J/(kg × K) under 5 T when x = 6. Based on the three results, we designed an amorphous composite that exhibits a table-shape magnetic entropy change (−ΔSm) profile with a rather high average −ΔSm (−ΔSmaverage~3.29 J/(kg × K) under 5 T) from 282.5 K to 320 K, which makes it a potential candidate for the highly efficient refrigerant in a domestic magnetic refrigeration appliance.
Elemental substitution is commonly used to improve the formability of metallic glasses and the properties of amorphous alloys over a wide compositional range. Therefore, it is essential to investigate the influence of element content change on the formability as well as magnetic and other properties. The purpose is to achieve tailorable properties in these alloys with enhanced glass forming ability. In this work, the glass-forming ability (GFA) and magnetic properties of the minor Mn-substituted Fe88Zr8B4 amorphous alloy were investigated. The addition of Mn improving the amorphous forming ability of the alloy. With the addition of Mn, the magnetic transition temperature, saturation magnetization and the magnetic entropy changes (−ΔSm) peaks decreased simultaneously, which is possibly caused by the antiferromagnetic coupling between Fe and Mn atoms. The dependence of −ΔSmpeak on Tc displays a positive correlation compared to the −ΔSmpeak- Tc−2/3 relationship proposed by Belo et al.
In the present work, Fe88Zr8−xSmxB4 (x = 2, 4) amorphous alloys (AAs) were successfully synthesized into the shape of 40-micrometer-thick ribbons and their magnetic properties were measured. The Fe88Zr8−xSmxB4 (x = 2, 4) AAs exhibited a rather high maximum magnetic entropy change (−ΔSmpeak): ~3.53 J/(K × kg) near 317 K for x = 2 and ~3.79 J/(K × kg) near 348 K for x = 4 under 5 T. The effects of a Sm substitution for Zr on the Curie temperature (Tc) and −ΔSmpeak were studied and compared to those of Nd and Pr substitutions, for the purpose of revealing the mechanism involved in more detail.
In the present work, Fe88Zr4Pr3B4Ce1 metallic glass (MG) was successfully prepared by minor Ce substitution for Pr, and compared with Fe88Zr4Pr4B4 MG in terms of glass forming ability (GFA), magnetic and magnetocaloric properties. The GFA, Tc and the maximum magnetic entropy change (−ΔSmpeak) of the Fe88Zr4Pr3B4Ce1 MG were found to decrease slightly. At the same time, the possible interaction mechanism of minor Ce replacing Pr was also explained. The critical exponents (β, γ and n) obtained by the Kouvel–Fisher method indicate that Fe88Zr4Pr3B4Ce1 MG near Tc exhibits typical magnetocaloric behavior of fully amorphous alloys. The considerable maximum magnetic entropy change (−ΔSmpeak = 3.84 J/(kg × K) under 5 T) near its Curie temperature (Tc = 314 K) as well as RCP (~ 646.3 J/kg under 5 T) make the Fe88Zr4Pr3B4Ce1 MG a better candidate as a component of the amorphous hybrids that exhibit table-shape magnetic entropy change profiles within the operation temperature interval of a magnetic refrigerator.
The new magnetic refrigeration (MR) technology, which uses the magnetocaloric effect (MCE) of materials for refrigeration, has shown apparent advantages over the compression refrigeration of freon and other gases. Therefore, how to obtain materials with excellent magnetic entropy change near room temperature is of great significance for the realization of MR. In order to achieve high Tc of a Gd-based amorphous alloy, Gd45Co50Al5 amorphous alloy with good room temperature MCE was selected, and a series of Gd45Co50−xFexAl5 (x = 2, 5, 10) amorphous alloys were prepared by adding Fe instead of Co. In this paper, the effect of Fe addition on the Curie temperature, and the magnetic entropy change in the alloys, were studied thoroughly. The results show that the Curie temperature is increased to 281 K by adding 5% Fe elements, which is mainly related to the enhanced 3d-3d interaction of transition elements caused by Fe addition, and the maximum value of magnetic entropy change is 3.24 J/(kg·K) under a field of 5 T. The results are expected to provide guidance for further improving the room temperature MCE of Gd-based amorphous alloys.