A human hand has 23-degree-of-freedom (DOF) dexterity for managing activities of daily living (ADLs). Current prosthetic hands, primarily driven by motors or pneumatic actuators, fall short in replicating human-level functions, primarily due to limited DOF. Here, we develop a lightweight prosthetic hand that possesses biomimetic 19-DOF dexterity by integrating 38 shape-memory alloy (SMA) actuators to precisely control five fingers and the wrist. The prosthetic hand features real-time sensing of joint angles in each finger, feeding data into a control module for selectively heating or cooling SMA actuators in a closed-loop manner, mimicking the functioning of human muscles. Enabled by the high-power density of SMAs, the hand part (from the wrist to the fingertip) only weighs 0.22 kg, much lower than existing products. We also integrate an onboard power management module that provides electricity for operating the entire system. In addition to 33 standard grasping modes, this prosthetic hand supports 6 advanced grasping modes designed for enhanced dexterity evaluation, expanding the range of achievable ADLs for amputees while facilitating standard prosthesis function tests and validation in real-world scenarios. This innovation offers a significant advancement in prosthetic hand functions, promising improved quality of life for users.
22 April 2021 in IEEE/ASME Transactions on Mechatronics
Soft actuators are versatile and can readily perform various functions and interact safely with humans and the environment owing to their deformability. Shape memory alloys (SMAs) have advantages of high power-to-weight ratio, silent operation, and high response speed, which make them suitable for fabricating soft, compact, and muscle-like soft actuators with various transformation capabilities. However, it is challenging to precisely control SMA-based soft actuators and robots because of the lack of explicit dynamics-based control method. In this article, a linear phase transition model of SMA is derived to express the dynamic model of an SMA planar actuator (SPA) in an explicit form. Then, a model-based feedback controller considering constraints of strain of the SMA, temperature increment of the SPA, and load increment was built. Strain gauges are used to obtain the bending angle of the SPA as the feedback signal for the controller. Various capabilities of the SPA, such as step response, position tracking with constant angular speed, and motion control with load, were experimentally evaluated. The developed method is meaningful for modeling and control of various SMA-based actuators and robots.
Inspired by a scallop's strong underwater propulsion mechanism, we designed and prototyped a scallop robot capable of clapping and swimming. In this work, an artificial velum was used to work as a check valve to stimulate the robot's swimming. A couple of supporting plates were fixed on the robot shells to achieve the modulation of clapping process of the shells. The scallop robot can move at a maximum average and instantaneous speed of 3.4 and 4.65 body lengths per second, respectively. The effect of the supporting plates, the artificial velum, as well as the clapping frequency and amplitude on the swimming performance of the scallop robot was also experimentally evaluated. By tuning the sizes of the jet apertures, the scallop robot is capable of achieving high mobility actions such as turning. We also obtained the aperture ratio with the corresponding turning radius. This scallop robot provides a new propulsion mechanism in underwater bionic robots; it is also of help to understand the swimming principle of scallops in terms of jet propulsion and clapping motion.
This paper presented a flexible and easily fabricated untethered underwater robot inspired by Aurelia, which is named “Au-robot”. The Au-robot is actuated by six radial fins made of shape memory alloy (SMA) artificial muscle modules, which can realize pulse jet propulsion motion. The thrust model of the Au-robot’s underwater motion is developed and analyzed. To achieve a multimodal and smooth swimming transition for the Au-robot, a control method integrating a central pattern generator (CPG) and an adaptive regulation (AR) heating strategy is provided. The experimental results demonstrate that the Au-robot, with good bionic properties in structure and movement mode, can achieve a smooth transition from low-frequency swimming to high-frequency swimming with an average maximum instantaneous velocity of 12.61 cm/s. It shows that a robot designed and fabricated with artificial muscle can imitate biological structures and movement traits more realistically and has better motor performance.