Qiqiang Hu

Dr. Qiqiang Hu

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 January 2021 in IEEE Transactions on Robotics
Verified
Journal Article
Closed access
Qiqiang HuQiqiang Hu
Qiqiang Hu
EDErbao Dong
Erbao Dong
DSDong Sun
Dong Sun
Soft grippers can be used to grasp objects with various geometric surface structures or stiffness but typically encounter difficulty in providing high grasping force. Although the combination of soft grippers with adhesive technology can increase their load capacity, this approach has disadvantages of compatibility and limited application range. This article has reported a bioinspired design of a soft gripper that integrates flat dry adhesive, soft actuator, and microspine to improve the comprehensive grasping ability of the soft gripper on smooth or rough surfaces. The adhesive strength of flat dry adhesives with different thickness or cross-linking ratios was investigated to ensure that a large grasping force can be provided. Soft actuators with uniform and nonuniform cross-sectional heights were compared, and results indicated that the soft actuator with a nonuniform cross-sectional height exhibited remarkable advantages for designing the integrated gripper. A microspine-spring-shape memory alloy coil structure was designed to control the retraction and protrusion of microspine and distribute the load on rough surfaces evenly. The proposed integrated gripper with the aforementioned design can lift regularly or irregularly shaped objects with smooth or rough surfaces and provide a higher adhesive force than the nonadhesive gripper. After inserting a flexible pressure film sensor into the soft gripper, the surface property of the grasped object can be measured, which is beneficial for the selection of a suitable grasping strategy in unknown environments. The designed gripper can be used in many applications, such as in unmanned aerial vehicles, industrial manipulators, and climbing robots.

27 July 2022 in IEEE Transactions on Robotics
Verified
Journal Article
Closed access
Qiqiang HuQiqiang Hu
Qiqiang Hu
EDErbao Dong
Erbao Dong
DSDong Sun
Dong Sun
Soft climbing robots have elicited widespread attention for their potential applications in inspection, maintenance, and search and rescue tasks. However, these robots face challenges in terms of their adaptability and motion capability in various surface environments, such as surfaces with a large gap or nonflat surfaces. In this article, we develop a soft modular climbing robot called Smcbot, which is assembled based on several soft bodies and feet modules. The soft body module provides large-scale telescopic motion and high output load through two soft actuators made of shape memory alloy wires. Meanwhile, the feet modules provide considerable adhesion on different surfaces due to the applied adhesive strategy. A theoretical model is also developed to predict the output performance (e.g., stiffness and output displacement) of the soft body, and the results are verified through experiments. The adaptability and motion capability of Smcbot is demonstrated on flat and nonflat surfaces with different properties, such as surfaces with a large gap and those with smooth and rough surfaces. This article uses the modular design to expand the application scope of soft climbing robots and to facilitate their adaption to various challenging environments with low time consumption and cost.

1 March 2023 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
Qiqiang HuQiqiang Hu
Qiqiang Hu
JLJunyang Li
Junyang Li
EDErbao Dong
Erbao Dong
DSDong Sun
Dong Sun
This letter reports a soft and scalable crawling robot that can actively adapt to flat planes and tubes without manual adjustment. The robot is mainly composed of a programmable origami body and two flexible electrostatic pads with a measured thickness of around 34 μm. The pad generates considerable adhesion on flat, convex, and concave substrates due to low deformation resistance. Origami bodies with different cross-sectional shapes are also fabricated and studied. Artificial muscles (e.g., shape memory alloy and vacuum actuation) are incorporated into the origami bodies to construct soft crawling robots at different scales. These robots can achieve multimodal movements, such as dual-mode crawling, turning, and climbing on flat planes, and move inside and outside a tube. In addition, the robot can be combined with a lightweight soft origami gripper to demonstrate the ability to manipulate objects along the way.

2 February 2021 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
Qiqiang HuQiqiang Hu
Qiqiang Hu
HHHanjin Huang
Hanjin Huang
EDErbao Dong
Erbao Dong
DSDong Sun
Dong Sun
This letter presents a bioinspired composite finger with self-locking joints that can perform long-time and high-load (27.8 N) grasping tasks with low power consumption. Inspired by the ratchet wrench, the self-locking joint includes a ratchet mechanism to provide a large grip force for the finger through mechanical interlocking. The finger uses two shape memory alloy coils (SMAc) to drive the tendon and open the interlocking. The locked position and strength are studied through kinematics and finite element analysis. In the experiments, the motion of the finger is optimized to achieve a robust grasp. A portable three-finger gripper is used to grasp and lift heavy objects with high payload-to-weight ratio. The gripper with remote control shows its potential applications, for example, in assisting unmanned aerial vehicles to perform tasks of perching and grasping.

15 June 2023 in Biomimetics
Verified
Journal Article
Open access
PDF file
YYYihan Yang
Yihan Yang
CCChenzhong Chu
Chenzhong Chu
HJHu Jin
Hu Jin
Qiqiang HuQiqiang Hu
Qiqiang Hu
MXMin Xu
Min Xu
EDErbao Dong
Erbao Dong
This paper presented a flexible and easily fabricated untethered underwater robot inspired by Aurelia, which is named “Au-robot”. The Au-robot is actuated by six radial fins made of shape memory alloy (SMA) artificial muscle modules, which can realize pulse jet propulsion motion. The thrust model of the Au-robot’s underwater motion is developed and analyzed. To achieve a multimodal and smooth swimming transition for the Au-robot, a control method integrating a central pattern generator (CPG) and an adaptive regulation (AR) heating strategy is provided. The experimental results demonstrate that the Au-robot, with good bionic properties in structure and movement mode, can achieve a smooth transition from low-frequency swimming to high-frequency swimming with an average maximum instantaneous velocity of 12.61 cm/s. It shows that a robot designed and fabricated with artificial muscle can imitate biological structures and movement traits more realistically and has better motor performance.

15 January 2025 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Qiqiang HuQiqiang Hu
Qiqiang Hu
ZCZhenlin Chen
Zhenlin Chen
EDErbao Dong
Erbao Dong
DSDong Sun
Dong Sun
Soft robots show advantages in flexibility and safe interaction compared with traditional rigid robots. The modular design of soft robots further improves their reconfigurability and easy maintenance. This article presents a soft modular robot based on a rectangular origami structure, which can achieve untethered, controllable, and diverse motions. The single robot module is designed with actuation by four shape memory alloy coils and attitude perception based on an inertial measurement unit sensor. The module has an option for the use of internal battery or external power, can be wirelessly charged, and can be used as a flexible sensor to sense forced deformation. A model-free controller based on the cross-coupling concept is also proposed to control the attitude angles of the single module, the accuracy and robustness of which are verified by extensive experiments. The strong independence of the origami module in actuation, sense, and control facilitates reconfiguring various robots, such as a crawling robot, a gripper, and a robotic arm, and programming their motions. These robots can be quickly assembled or disassembled by magnetic attachments and will provide solutions for variable work assignments.