We report a method of obtaining controllable spatially varying liquid crystal pretilt angles using a stacked alignment layer. The stacked alignment layer consists of nano-domains of horizontal and vertical alignment materials. The pretilt angle is controlled by varying the domain ratio of the two layers. By using photoalignment material as the top layer, the pretilt angle can be controlled by varying the UV light dosage. A spatially variable UV light beam can be used to control the pretilt angle spatially. An electrically tunable-focus liquid crystal lens is obtained using this method.
Passivation of photoalignment films by continuous layers of reactive mesogen provides stable liquid crystal alignment and electro-optic performance equivalent to that of rubbed polyimide films.
Smart windows which switch between transparent and scattering states can be used not only as privacy window in buildings and cars, but also as information displays, and motorcycle helmet visors. Here, we have proposed a reverse mode polymer-stabilised liquid crystals (PSLCs) smart window based on inhomogeneous alignment surface, which greatly enhances the haze by 42% when compared to device without inhomogeneity treatment. A 100-cm2 window that switches between the power-off clear state (~4% haze) and a power-on scattering state (64% haze at 15 V) in less than 3.5 ms is demonstrated. Since no high-temperature treatment (< 80°C) is involved in device fabrication, further development on plastic films is feasible. Graphical Abstract
We propose here a novel multi-layered waveguide liquid crystal (LC) smart window with full color rendering based on a polymer-network liquid crystal system. The inserted position of three-primary-color LED light bars is specially designed, which is parallel to the LC alignment to obtain a higher difference between transparent and scattering states. The optimal matching of polymer-network LC system is experimentally achieved by comparing several groups of LC and reactive mesogen materials. The prepared smart window is measured and analyzed in detail including optical/chromatic test, morphology characterization, and actual application effect. The proposed architecture opens up new prospects of flexible color switchable ability and synchronized full-color display for smart windows without limitations of slow LC response time and complicated field sequential driving scheme.
In this Letter, we report a method to prepare a liquid crystal (LC) lens based on a variable pretilt angle of a photoalignment (PA) layer. With precise control of the irradiance, such PA provides good control on the pretilt angle that can be tuned in the range of 1°–89°. Therefore, the precise control of the irradiance generates a spatially varying pretilt angle with any desired pretilt angle profile. Thus, the tunable LC lenses have been fabricated and characterized. With low voltage operations, easy fabrication, and relatively high switching speed, such lenses can be applied in many modern optical and photonic devices.
A front polarizer-free optically rewritable (ORW) liquid crystal display (LCD) has been made via a hybrid alignment configuration with dye-doped LCs. The hybrid structure consists of one optically active planar and one optically passive homeotropic alignment layer. The rewritability of the device is achieved by photo-reorienting the azo dye molecules in the active planar alignment layer. The dye is doped in LCs to function as a polarizer by following the LCs’ direction via a guest-host effect so that the front polarizer can be eliminated. This makes the device more compact and easier to operate for image erasing and rewriting. The image rewriting time only requires , which is determined by the exposure energy and LC parameters. The hybrid-mode dye-doped ORW LCD devices could find applications in E-paper, transparent display, and various photonics devices.