In this work molecularly imprinted polymer (MIP)-aptamer (Apt) hybrid recognition sensor based on nanocomposites of reduced graphene oxide (rGO) and gold nanoparticles (AuNPs) was reported. The glassy carbon electrode (GCE) was first modified with rGO and AuNPs. Then thrombin-Apt composites were obtained by the incubation of thiolated thrombin aptamer and template thrombin. Subsequently thrombin-aptamer composites were immobilized onto AuNPs/rGO/GCE through the Au-S bond between AuNPs and thiol group at the terminal of aptamer. Finally MIP-Apt hybrid recognition sensor was prepared by the electropolymerization of thionine. Using the polythionine as the probe, cyclic voltammetry, electrochemical impedance spectroscopy and differential pulse voltammetry were performed to characterize the MIP-Apt sensor. Adsorption kinetic model was established to obtain kinetic binding constants and equilibrium current. Due to hybrid recognition of MIP and Apt, MIP-Apt sensor has faster rebinding rate, better selectivity and sensitivity, comparing with non-molecularly imprinted sensor and non-aptamer molecularly imprinted sensor. The MIP-Apt sensor exhibited good linear response from 2.5 × 10−9 mg/mL to 1.3 × 10−6 mg/mL for thrombin with a detection limit of 1.6 × 10−10 mg/mL.
16 April 2016 in Journal of Solid State Electrochemistry
A sensitive non-enzyme hydrogen peroxide (H2O2) sensor has been prepared based on Fe3O4/reduced graphene oxide (Fe3O4/RGO) nanocomposite material. The sensitivity of Fe3O4/RGO modified electrode toward the electrochemical reduction of H2O2 is higher than that of Fe3O4 or Fe3O4/GO modified electrodes. A linear range of H2O2 concentration is obtained from 5.0 × 10−7 to 3.0 × 10−3 M with a detection limit of 1.8 × 10−7 M (S/N=3). The Fe3O4/RGO modified electrode also exhibits high selectivity and stability in the detection of H2O2, which suggests that Fe3O4/RGO nanocomposite material provides a promising platform for the non-enzyme electrochemical sensor.
A novel electrochemical horseradish peroxidase (HRP) sensor was developed based on boronate affinity-based electropolymerized polythionine (PTh) molecularly imprinted polymer (MIP) as specific recognition element for HRP on gold nanoparticles (AuNPs) modified glassy carbon electrode, in which PTh acted as the electrochemical probe for the sensor. The sensor was characterized by scanning electron microscopy and electron dispersive spectroscopy. Electrochemical impedance spectroscopy, cyclic voltammetry, and differential pulse voltammetry were exploited for the study of the properties of the MIP sensor. The MIP sensor exhibited excellent linear response over the range of 2.0 × 10−10 mg/mL ∼ 1.0 × 10−7 mg/mL for HRP. In addition, with MIP film as HRP immobilized matrices, the sensor for the detection of H2O2 was developed with the MIP sensor based on the reduction of H2O2 catalyzed by HRP in the presence of electron mediator PTh. The sensor showed linear relationships between the current response and H2O2 concentration from 6.0 × 10−7 to 2.0 × 10−5 mol/L. HRP and H2O2 bi-analyte sensor based on MIP film was successfully developed in this work. The developed method can also be applicable for enzyme and its enzymatic substrate bi-analyte sensor.
A horseradish peroxidase (HRP) biosensor was constructed by one step electrodeposition method and the direct electrochemistry of HRP in the biosensor was studied. In the biosensor HRP was immobilized on surface of the glassy carbon electrode (GCE) during the process of the gold nanoparticles (AuNPs) deposition with the help of surfactant cetyltrimethylammonium bromide (CTAB), through which HRP-CTAB-AuNPs/GCE was successfully constructed. HRP-CTAB-AuNPs/GCE can directly catalyze the reduction of peroxides without the electron mediator. SEM and electron dispersive spectroscopy (EDS) were used to characterize the modified electrode. The preparation process of the modified electrode was studied by electrochemical impedance spectroscopy. The electrochemical properties of the modified electrode to hydrogen peroxide, tert-butyl hydroperoxide and cumyl hydroperoxide were studied by electrochemical cyclic voltammetry and current-time curve. Results showed that the modified electrode exhibited good catalytic performances for the detection of hydrogen peroxide, tert-butyl hydroperoxide and cumyl hydroperoxide. The sensitivities for H2O2, tert-butyl hydroperoxide and cumyl hydroperoxide are 0.0187 A·L/mol, 0.000340A·L/mol and 0.0052 A·L/mol, respectively. The detection limits are 2.3 × 10−7 mol/L, 8.6 × 10−6 mol/L and 3.6 × 10−6 mol/L, respectively.