Deli Jiang

Ms. Deli Jiang


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 July 2023 in Agriculture
Verified
Journal Article
Open access
PDF file
DJDeli Jiang
Deli Jiang
XCXuegeng Chen
Xuegeng Chen
LYLimin Yan
Limin Yan
HGHaixiao Gou
Haixiao Gou
JYJiacheng Yang
Jiacheng Yang
YLYing Li
Ying Li
Due to the lack of accurate discrete element simulation model parameters in the design optimization process of key agricultural machinery components in the whole mechanization technology system of cotton generation, the optimization and improvement of the machine is restricted to a certain extent. Taking a cotton rootstalk–soil mixture at harvest stage in a Xinjiang cotton field as the research object, the discrete element simulation model of a cotton rootstalk–soil mixture was constructed, and the contact parameters of discrete element simulation were calibrated by combining simulation analysis with a physical test. The discrete element significant-influence parameters of cotton rootstalk–soil mixture were screened by Placket–Burman test, and the optimal range of significant-influence parameters was determined by the steepest climbing test. According to the principle of Box–Behnken test, the quadratic regression model of repose angle and significant parameters was established with repose angle as the response value. Taking the actual repose angle as the target, the Design-Expert software was used to optimize the parameters with significant influence and obtain the optimal combination of parameters. The optimal parameter combination was compared and verified by simulation experiments. The relative error between the simulated repose angle and the physical test was 2.36%. The results showed that the calibrated parameters were true and reliable, which could provide a theoretical reference for the discrete element simulation of cotton rootstalk–soil mixture in a Xinjiang cotton field.

21 August 2024 in Processes
Verified
Journal Article
Open access
PDF file
TWTao Wu
Tao Wu
LYLimin Yan
Limin Yan
DJDeli Jiang
Deli Jiang
HGHaixiao Gou
Haixiao Gou
XFXuanhe Fu
Xuanhe Fu
JZJinhao Zhang
Jinhao Zhang
In view of the large difference in moisture content of cotton stalk in autumn in Xinjiang, the existing process of obtaining discrete element simulation parameters of cotton stalk is low in accuracy and complicated in operation, leading to the problems of poor universality and low accuracy in regard to the discrete element simulation parameter-calibration method in the process of mechanized transportation, throwing and returning to the field. Therefore, the experimental study on cotton stalk with different moisture content was carried out with the accumulation angle as the response value, so as to construct a parameter model that can quickly and accurately calibrate cotton stalk with different levels of moisture content. The model has high applicability and flexibility, and it can be widely used in the simulation test of various cotton field-operation machinery, such as a residual film-recycling machine, cotton picker, crushing and returning machine and other equipment. The water content–accumulation angle model was established by the cylinder-lifting method, and the correlation coefficient of the model was 0.9993. Based on EDEM 2020 software, the Hertz–Mindlin model was used to simulate the stacking angle of cotton stalk, and the rolling friction coefficient, static friction coefficient and collision recovery coefficient between cotton stalk and cotton stalk–steel were obtained. Through the Plackett–Burman test, climbing test and Box–Behnken test, three significant parameters, namely the rolling friction coefficient, static friction coefficient and static friction coefficient between cotton stalk and steel, were selected from discrete element simulation parameters to characterize the moisture content of cotton stalk, and the accumulation angle–discrete element parameter model was established. The p-value of the model was less than 0.0001, and the relative error was only 2.67%. Based on the moisture content–stacking angle model and the stacking angle–discrete element parameter model, the moisture content–discrete element parameter model was constructed. The model was verified by the cylinder-lifting method and the plate-drawing method, and the relative error was only 2.79%. Finally, the model was further verified by comparing the effect of the throwing uniformity between the mechanical simulation test and field test, and the relative error was only 4.75%. The test proves that the moisture content–discrete element parameter model is accurate and reliable, not only providing the design basis and support for the mechanization research of cotton stalk conveying and returning to the field in Xinjiang but also providing ideas for the calibration of discrete element simulation parameters of other crop straws.

22 March 2024 in Agriculture
Verified
Journal Article
Open access
PDF file
DJDeli Jiang
Deli Jiang
XCXuegeng Chen
Xuegeng Chen
LYLimin Yan
Limin Yan
JZJinhao Zhang
Jinhao Zhang
TWTao Wu
Tao Wu
XFXuanhe Fu
Xuanhe Fu
Compared with the conventional horizontal conveyor-chain-type plastic-film-picking device, the longitudinal nail-tooth-chain-plate-type plastic-film-picking device developed by our team in the early stage has little tearing effect on the mulching film, and the separation effect of the plastic film and the impurity is better. With a view to further enhancing the performance of the plastic-film-picking device, this study optimized it and designed a friction-type nail-tooth-chain-plate plastic-film-picking chain that does not overload or slip and also facilitates the installation of functional components. The kinematic analysis of the picking nail teeth on the film-picking chain was carried out, and the motion equation and trajectory of the nail teeth during the operation were determined, as well as the requirements for the nail teeth to complete the mulching-film pickup. The key parameters of the plastic-film-picking system were determined by analyzing the no-leakage condition of the plastic film and the force. Moreover, the structural design and key parameters of the shovel-type film-lifting device were determined. According to the design results, a prototype was developed, and a multi-factor test of the operating parameters was carried out. The operating speed, spacing of the pickup nail teeth, depth of the film shovel into the soil, and distance between the tip of the film shovel and center of the picking drum were used as the experimental factors. The plastic-film pickup rate, impurity rate of the recovered mulching film, and traction resistance were used as the test indicators. A four-factor, five-level quadratic regression orthogonal combination experiment was conducted using the Central Composite Design (CCD). The effect of each test factor on the test index of the plastic-film-picking system was studied, the regression models were established, and the optimal parameter combination was acquired by using the multi-objective optimization method. When the working speed was 6 km/h, the pickup-nail-tooth spacing was 228.6 mm, the depth of the film-lifting shovel into the soil was 37 mm, and the distance between the tip of the film shovel and the center of the pickup drum was 130 mm, the field experiment shows that the plastic-film pickup rate was 90.12%, the impurity rate of the recovered mulching film was 8.96%, and the traction resistance was 19.905 kN. The relative errors between the test results and the predicted values of the regression models were less than 5%, indicating that the parameter optimization regression models were reliable, and the designed friction-type nail-tooth-chain-plate plastic-film-picking system met the technical requirements of agricultural-plastic-film recycling. The research results can provide a technical reference for the development of mulching-film collection machines.