This study focused on the middle-pressure jet grouting method, which has a complicated development mechanism for the columnar soil-improved body, with the aim of establishing a computer-aided engineering (CAE) system that can simulate the performance on a computer. Furthermore, in order to confirm the effect of middle-pressure jet grouting with mechanical agitation and mixing, a comparative analysis was performed with different jet pressures, the development situation was visualized, and the performance of this method was evaluated. The results of MPS-CAE as one of the CAE systems showed that the cement slurry jet ratio in the planned improvement range, including the periphery of the mixing blade, by the middle-pressure jet grouting together with the mechanical agitation and mixing was increased and a high quality columnar soil-improved body was obtained. It is expected that the introduction of CAE will contribute to the visualization of the ground, and that CAE will be an effective tool for the visual management of construction for ground improvement and the maintenance of improved grounds during the life cycle of the ground-improvement method.

This paper undertakes a comprehensive review to underscore the central role of sustainability in the evaluation and innovation of jet grouting technologies. It meticulously traces the evolution of evaluation methodologies, emphasizing the imperative of sustainable practices throughout history. Traditional evaluation paradigms are examined alongside contemporary trends, with a particular focus on sustainability metrics and visualization techniques. Through an examination of innovative jet grouting technologies, this paper illustrates how sustainability principles have driven advances aimed at improving the efficiency and environmental impact of jet grouting methods. Central to this review is an assessment of sustainability across multiple dimensions, including method applicability, installation and operational compatibility, and the performance of the resulting jet grouted piles. By emphasizing sustainability considerations, the paper highlights the intrinsic link between environmental integrity and technological innovation in the field of jet grouting. In addition, it discusses analytical evaluation methods designed to proactively address sustainability concerns prior to construction, thereby promoting a more environmentally responsible approach. Finally, this paper presents a pioneering evaluation framework that integrates real-time monitoring and visualization tools, allowing stakeholders to track sustainability milestones throughout the construction process. By emphasizing sustainability as a guiding principle, this review advocates for a paradigm shift toward more ecologically sound and resilient jet grouting practices.

The major focus of this study was determining the effectiveness of new construction specifications regarding the method of cement grout injection for the jet grouting system (high-pressure injection stirring method), with the objective of developing a sustainable ground improvement method. The recent innovative jet grouting techniques allow for improvement at middle pressure, but the mud discharge amount is drastically increased. This produces a serious environmental and financial burden during the disposal of mud discharge. This study attempts to develop a sustainable jet grouting method. The simulation model was prepared by the 3D AutoCAD software, and the analysis was conducted using the moving particle semi-implicit method (MPS method). The study focused on the changes that occurred in the mixing ratio of cement slurry and soil due to the changes made in cement milk spraying during the construction phase and compared it with the traditional method of cement milk spraying. All other construction parameters were kept the same for both cases, and the comparison result shows that the modified construction specification provides a denser and larger improved soil body than the traditional method. Furthermore, the density of the number of particles was determined at the upper, middle, and lower portions of the improved body for comparison.

The progress status of jet-grouting construction during the construction phase is difficult to verify and even after the completion of construction, it can be verified only by empirical methods. This study attempted to recreate a realistic simulation result of the middle-pressure jet-grouting method by establishing a computer-aided engineering (CAE) system from the planning/design stage of the ground model and verifying the validity of the construction process after the model was analyzed by the moving particle semi-implicit (MPS) method. The governing parameters for the ground were determined by the MPS simulation of the unconfined compression test. The construction simulation was analyzed and the results were validated by visual confirmation of the related phenomena, such as the soil-improved body formation and mud discharge. To verify the accuracy of the mud discharge phenomenon, three different probe regions were set above the model ground and the amount of mud discharge generated in each region was computed before drawing an overall conclusion of the study. A soil-improvement body of approximately 0.38 m³ was observed to have formed at the end of the study and the highest mud discharge particle number measured, for instance, was 896. This study is expected to serve as a guideline for further studies on simulation-based research.

This paper focuses on the development of high-flowability liquefied stabilized soils (HFLSS) made of recycled construction sludge (RCS) to enhance their application in construction work. Liquefied stabilized soils (LSSs) have already found widespread use in construction sites, particularly for filling long-distance structures and dealing with complex underground spaces. However, to further optimize their performance, the development of high-flowability liquefied stabilized soils (HFLSSs) with superior flowability is required. This study experimentally investigates the basic properties, including mechanical characteristics and flowability performance, of the newly developed HFLSS made of RCS. The results confirm that the developed HFLSS made of RCS meets the quality requirements expected from LSSs and exhibits enhanced flowability, making it a promising material for construction applications. The advanced development of LSSs in this paper expects to promote recycling construction-generated soils, including construction-generated sludges in the construction industry.

This study emphasizes the importance of accurate input parameters for ensuring the precision and reliability of simulations by conducting a sensitivity analysis to determine the calculation and material parameters. The aim is to determine the exact material parameters, for two different soil samples in a rigid state, by comparing the results of a sensitivity analysis with the unconfined compression test benchmark data for each sample. The moving particle semi-implicit (MPS) method, one of the particle methods, was chosen to reproduce the unconfined compression test simulation. The soil particles were assumed to be in the rigid state of the Bingham fluid bi-viscosity model. The first part of the study focuses on a sensitivity analysis of the basic simulation parameter values inputted during the simulation setup for the calculation procedure and the selection of the criteria for the calculation method, and then recommends the optimum values for a higher degree of accuracy based on the results. The second part of the study uses the results to analyze the sensitivity of each influencing parameter of the bi-viscosity Bingham fluid. In the final section, this study will provide a general guideline for selecting the optimum values for the MPS parameters and will recommend approximate values for other soil samples in future research with properties similar to those used in this study. Doi: 10.28991/CEJ-2024-010-01-01 Full Text: PDF