Reduction of threading dislocation density in top-down fabricated GaN nanocolumns (NCs) via their successive lateral shrinkage by anisotropic wet etch and lateral overgrowth by metalorganic chemical vapor deposition is studied by transmission electron microscopy. The fabrication process involves a combination of dry and wet etches to produce NC arrays of a low fill factor (<5%), which are then annealed and laterally overgrown to increase the array fill factor to around 20%–30%. The resulting NC arrays show a reduction in threading dislocation density of at least 25 times, allowing for the reduction in material volume due to the array fill factor, with dislocations being observed to bend into the voids between NCs during the overgrowth process.
Depth-sensitive magnetic, structural, and chemical characterization is important in the understanding and optimization of physical phenomena emerging at the interfaces of transition metal oxide heterostructures. In a simultaneous approach we have used polarized neutron and resonant x-ray reflectometry to determine the magnetic profile across atomically sharp interfaces of ferromagnetic /multiferroic bilayers with subnanometer resolution. In particular, the x-ray resonant magnetic reflectivity measurements at the Fe and Mn resonance edges allowed us to determine the element-specific depth profile of the ferromagnetic moments in both the and layers. Our measurements indicate a magnetically diluted interface layer within the layer, in contrast to previous observations on inversely deposited layers [P. Yu et al., Phys. Rev. Lett. 105, 027201 (2010)]. Additional resonant x-ray reflection measurements indicate a region of altered Mn and O content at the interface, with a thickness matching that of the magnetic diluted layer, as the origin of the reduction of the magnetic moment.
Ferroelectrics, due to their polar nature and reversible switching, can be used to dynamically control surface chemistry for catalysis, chemical switching, and other applications such as water splitting. However, this is a complex phenomenon where ferroelectric domain orientation and switching are intimately linked to surface charges. In this work, the temperature‐induced domain behavior of ferroelectric‐ferroelastic domains in free‐standing BaTiO3 films under different gas environments, including vacuum and oxygen‐rich, is studied by in situ scanning transmission electron microscopy (STEM). An automated pathway to statistically disentangle and detect domain structure transformations using deep autoencoders, providing a pathway towards real‐time analysis is also established. These results show a clear difference in the temperature at which phase transition occurs and the domain behavior between various environments, with a peculiar domain reconfiguration at low temperatures, from a‐c to a‐a at ≈60 °C. The vacuum environment exhibits a rich domain structure, while under the oxidizing environment, the domain structure is largely suppressed. The direct visualization provided by in situ gas and heating STEM allows to investigate the influence of external variables such as gas, pressure, and temperature, on oxide surfaces in a dynamic manner, providing invaluable insights into the intricate surface‐screening mechanisms in ferroelectrics.
The elastic interaction between kinks (and antikinks) within domain walls plays a pivotal role in shaping the domain structure, and their dynamics. In bulk materials, kinks interact as elastic monopoles, dependent on the distance between walls (d−1) and typically characterized by a rigid and straight domain configuration. In this work the evolution of the domain structure is investigated, as the sample size decreases, by the means of in situ heating microscopy techniques on free‐standing samples. As the sample size decreases, a significant transformation is observed: domain walls exhibit pronounced curvature, accompanied by an increase in both domain wall and junction density. This transformation is attributed to the pronounced influence of kinks, inducing sample warping, where “dipole–dipole” interactions are dominant (d−2). Moreover, a critical thickness range that delineates a crossover between the monopolar and dipolar regimens is experimentally identified and corroborated by atomic simulations. These findings are relevant for in situ TEM studies and for the development of novel devices based on free‐standing ferroic thin films and nanomaterials.