José Carlos Zepeda

José Carlos Zepeda

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 August 2023 in Coatings
Verified
Journal Article
Open access
PDF file
JZJosé Carlos Zepeda
José Carlos Zepeda
EREnrique Rosendo
Enrique Rosendo
CRCrisóforo Morales Ruíz
Crisóforo Morales Ruíz
EEEduardo Camacho Espinosa
Eduardo Camacho Espinosa
LTLeticia Treviño
Leticia Treviño
FCFabiola Gabriela Nieto Caballero
Fabiola Gabriela Nieto Caballero
In this paper, a solar cell based on WO3/CdTe heterojunction was analyzed and optimized, for which the following structure of the Al/AZO/WO3/CdTe/NiO/Ni device was proposed, which was numerically simulated by the SCAPS 1-D software. Using the software, the effect of the thickness and carrier concentration of the absorber layer (CdTe) and the window layer (WO3) was analyzed, and the optimal value of these parameters was found to be 2 µm and 1015 cm−3 for the CdTe layer and 10 nm and 1019 cm−3 for the WO3 layer, respectively. The influence of the defect density of the WO3/CdTe interface on the performance of the proposed cell was also analyzed, simulating from 1010 to 1016 cm−2, obtaining better device performance at lower interface defect density. Another parameter analyzed was the operating temperature on the photovoltaic performance of the device, observing that the solar cell has a better performance at lower temperatures. Finally, a maximum optimized PCE of 19.87% is obtained with a Voc = 0.85 V, Jsc = 28.45 mA/cm2, and FF = 82.03%, which makes the WO3/CdTe heterojunction an interesting alternative for the development of CdTe-based solar cells.

24 October 2024 in Physica Scripta
Verified
Journal Article
Open access
JZJosé Carlos Zepeda
José Carlos Zepeda
EAEnrique Rosendo Andrés
Enrique Rosendo Andrés
EEEduardo Camacho Espinosa
Eduardo Camacho Espinosa
CRCrisóforo Morales Ruíz
Crisóforo Morales Ruíz
LYLeticia Treviño Yarce
Leticia Treviño Yarce
ASAntonio Coyopol Solis
Antonio Coyopol Solis
This paper presents the numerical analysis of cadmium telluride (CdTe) based solar cells using iron di silicide (FeSi2) as the second absorber layer and aluminum-doped zinc oxide (AZO) as the window layer. The photovoltaic performance of solar cells with Al/AZO/CdTe/FeSi2/Ni structure was analyzed and improved by SCAPS-1D software. When analyzing the influence of thickness and carrier concentration on the photovoltaic performance, it was found that the optimum values for the CdTe layer were 300 nm and 1015 cm−3, for the AZO layer they were 10 nm and 1018 cm−3, while for the FeSi2 layer they were 1 μm and 1018 cm−3. The defect density (Nt) at the AZO/CdTe and CdTe/FeSi2 interfaces was also analyzed, obtaining that the optimum value of Nt is 1010 cm−2 at both interfaces. Device optimization is achieved by obtaining a maximum Power Conversion Efficiency (PCE) of 27.22% with an open circuit voltage (Voc) of 0.63 V, a short circuit current density (Jsc) of 51.43 mA cm−2 and a fill factor (FF) of 83.06%, which makes FeSi2 a potential alternative for the development of CdTe-based solar cells due to its absorption of photons with lower energy wavelengths.

1 May 2025 in Materials Research Express
Verified
Journal Article
Open access
LTLeticia Treviño
Leticia Treviño
EREnrique Rosendo
Enrique Rosendo
JZJosé Carlos Zepeda
José Carlos Zepeda
Maria Josefina AguilaMaria Josefina Aguila
Maria Josefina Aguila
CRCrisóforo Morales Ruíz
Crisóforo Morales Ruíz
GSGodofredo García Salgado
Godofredo García Salgado
This study, developed a CdS/Sb2S3-based solar cell structure using Sb2S3 as the absorber material and CdS as the window layer. The performance of the ITO/CdS/Sb2S3/Pt heterostructure was numerically analyzed using SCAPS-1D software. The investigation focused on the impact of the back contact’s work function, where platinum yielded the best results. Furthermore, the effects of absorber and window layer thickness, series and parallel resistances, total defect density, acceptor concentration, and operating temperature on Voc, Jsc, FF, and overall solar cell efficiency were systematically examined. The evolution of peak power conversion efficiencies under AM1.5 conditions, as represented in the NREL efficiency chart, serves as a key benchmark for evaluating and comparing the performance of different photovoltaic technologies. Thin-film solar cells have achieved a maximum reported efficiency of 23.6% according to this standard. However, the structure proposed in this study achieves a remarkable efficiency of 26.83% under the AM1.5 G illumination spectrum. This result highlights the potential of the developed technology for high-performance solar energy conversion applications. Additionally, when the operating temperature varied from 10 °C to 60 °C, the efficiency decreased by only 2%, demonstrating the structure’s high thermal stability.

11 May 2026 in RD-ICUAP
Verified
Journal Article
Open access
JZJosé Carlos Zepeda
José Carlos Zepeda
ATAdriana Hernández Teniza
Adriana Hernández Teniza
La contaminación ambiental constituye un problema persistente y de gran relevancia, derivado de las diversas actividades económicas e industriales, entre ellas la generación de electricidad, cuya producción depende en gran medida del uso de combustibles fósiles. En respuesta a esta problemática, se han desarrollado e implementado alternativas orientadas a mitigar el impacto ambiental, promoviendo el uso de tecnologías basadas en fuentes de energía renovable. Estas tecnologías buscan ser sostenibles, eficientes, ampliamente disponibles en la naturaleza y, fundamentalmente, no tóxicas para el entorno. En este contexto, los generadores eólicos representan una opción viable y prometedora, al aprovechar una fuente inagotable de energía: el viento. Cada uno de los componentes que integran estos sistemas está diseñado para optimizar la conversión de la energía cinética del aire en energía eléctrica, alcanzando potencias que varían de aproximadamente 100 W a 12 MW, según el tamaño del generador y las condiciones ambientales de operación, lo que lo convierte en una gran opción de tecnología sostenible y sustentable para el mundo.

7 October 2026 in Physica Scripta
Verified
Journal Article
Open access
PDF file
LTLeticia Treviño
Leticia Treviño
EREnrique Rosendo
Enrique Rosendo
JZJosé Carlos Zepeda
José Carlos Zepeda
CMCrisóforo Morales-Ruíz
Crisóforo Morales-Ruíz
RGReina Galeazzi-Isasmendi
Reina Galeazzi-Isasmendi
RRRomán Romano-Trujillo
Román Romano-Trujillo
Antimony selenide (Sb 2 Se 3 ) is a promising absorber for thin-film photovoltaics because of its suitable band gap, strong optical absorption, simple binary composition, and comparatively low toxicity. In this work, a physics-guided SCAPS-1D analysis of a minimal ITO/CdS/Sb 2 Se 3 /Mo solar-cell architecture was performed to distinguish the influence of rear-contact energetics, layer thicknesses, bulk and interface defects, absorber doping, and selected parameter interactions. The Mo-based reference device yielded V oc = 0.7094 V, J sc = 41.53 mA cm −2 , FF = 82.73%, and PCE = 24.37% under AM1.5G illumination at 300 K. Rear-contact work-function analysis showed that low-work-function contacts strongly limit hole extraction and photovoltage, whereas Mo (Φ m ≈4.95 eV) approaches a nearly non-blocking hole-contact condition within the idealized contact model. Increasing the Sb 2 Se 3 thickness mainly enhanced J sc below approximately 1.0 µ m, whereas CdS thickness produced only minor changes over 0.02–0.20 µ m. A low-bulk-defect plateau was identified between approximately 10 10 and 10 13 cm −3 , while N t , bulk approaching 10 15 cm −3 enhanced distributed Shockley–Read–Hall recombination and degraded performance. Increasing N t , int from 10 10 to 10 14 cm −2 reduced V oc from 0.7094 to 0.6050 V and PCE from 24.37% to 20.50%, while Jsc remained comparatively insensitive. Interface states located approximately 0.3–0.6 eV above the highest valence-band edge produced the strongest losses, consistent with the calculated interface recombination current. The isolated acceptor-concentration sweep identified N A ≈10 16 cm −3 as a favorable balance between junction electrostatics and carrier collection, while a limited, targeted two-factor interaction assessment revealed coupling between absorber thickness and bulk defects and between doping and rear-contact energetics. Comparison with recent experimental and numerical studies indicates that the 24.37% baseline represents an idealized numerical operating condition rather than a directly achievable efficiency. These results identify rear-contact selectivity, bulk-defect control, and CdS/Sb 2 Se 3 interface quality as key targets for further device development.