In order to compare and analyze the seismic response characteristics of a safety-related nuclear structure on a non-rock site in the condition of raft and pile group foundations under unidirectional and multidirectional seismic motion input, a large-scale shaking table test of the soil-nuclear structure system was carried out in this paper. In the test, the soil was uniform silted clay, and the shear wave velocity was 213 m/s. Considering the similarity of the superstructure natural frenquency, the actual nuclear power structure was simplified to a three-story frame shear wall structure model. The annular laminated shear model box was used to take the boundary effect of soil into consideration; the seismic motions = were input in only one horizontal direction or three directions at the same time for the shaking table test, and the results were analyzed. The results of the test show that the acceleration response of the safety-related nuclear plant is affected by the directions of input seismic motion and the forms of the foundation. When the seismic motion is input simultaneously in three directions, the acceleration responses of the horizontal motion and vertical rocking of the safety-related plant are larger than those of the single-direction input. The acceleration response of the horizontal motion and vertical rocking of the safety-related structure with the pile group foundation is smaller than that with the raft foundation. The values of most frequency bands in the horizontal acceleration Fourier amplitude spectrum at the top of the pile-foundation structure are smaller than that at the top of the raft-foundation structure, while the displacement is basically the same as that of the raft-foundation structure. This is related to the relation between the frequency component of input seismic motion and the natural frequency of the structure system. Therefore, it is more reasonable to use three-dimensional seismic input in the seismic response analysis of nuclear power plants. The seismic performance of nuclear power plants can be enhanced by using pile group foundations.

This study investigates the pile foundation of a nuclear power plant situated on medium-soft soil. It employs an improved viscoelastic artificial boundary unit to accurately simulate the boundary conditions of the calculation area. The research utilizes a constitutive model of concrete damage plasticity for the pile foundation and an equivalent linearized model for the soil layer. Through large-scale shaking table experiments and numerical simulations, we explore the internal force distribution within the nuclear power structure’s pile foundation and assess the extent of the damage. The results indicate that damage primarily occurs in the medium-soft ground, concentrating in the upper part of the pile and affecting the entire cross-section. Subsequent numerical analyses were conducted after reinforcing the soil layer around the top of the pile. The findings demonstrate that this reinforcement leads to a more uniform and rational distribution of internal forces along the pile, significantly reducing damage. Notably, there is no severe damage extending across the entire cross-section after reinforcement. This outcome highlights the potential for improving the force distribution in the pile foundations of nuclear power structures through appropriate soil layer reinforcement. The insights gained from this study provide valuable guidance for the seismic design of nuclear power structures.