Red mud (RM) is composed of a waste alkaline solution (pH = 13.3) obtained from the production of alumina. It contains high concentrations of hematite (Fe2O3), goethite (FeOOH), gibbsite [Al(OH)3], a boehmite (AlOOH), anatase (Tetragonal–TiO2), rutile (Ditetragonal dipyramidal–TiO2), hydrogarnets [Ca3Al2(SiO4)3−x(OH)4x], quartz (SiO2), and perovskite (CaTiO3). It was shown to be an excellent catalytic mixture for biodiesel production. To demonstrate the value of RM, an environmentally friendly process of transesterification in aqueous medium using waste cooking oil (WCO), MeOH, and waste alkaline solution (WAS) obtained from aluminum production was proposed. Triglycerides of WCO reacted with MeOH at 60 °C to yield mixtures of fatty acid methyl esters (FAMEs) in the presence of 0.019% (w/w) WAS/WCO using the WAS (0.204 mol L−1, predetermined by potentiometric titration) from aluminum production by the Bayer process. The use of the new catalyst (WAS) resulted in a high yield of the products (greater than 99% yield).
A produção de alumina através do processo Bayer gera grande quantidade de resíduo conhecido como “lama vermelha”. O resíduo é separado do denominado licor verde que contém íons aluminato solubilizados, e direcionado para etapas de separação sólido/líquido realizadas em tanques (lavadores), onde ocorre a dosagem de polímeros solúveis em água que induzem a sedimentação. Utiliza-se sistema de decantação contracorrente com o objetivo de espessar a lama, recuperando o máximo possível de soda cáustica fornecendo um “overflow” contendo baixa concentração de resíduos. O uso de polímeros floculantes em pó, com alto peso molecular e carga iônica adequada, apresenta ganhos significativos relacionados à redução de dosagem, velocidade de sedimentação e compactação do “underflow” resultando em redução significativa de custos no processo produtivo. Entretanto, apesar dos benefícios relatados, muitas refinarias no Brasil ainda fazem uso de polímeros floculantes em emulsão. Nesse trabalho avaliou-se a performance do floculante em pó da Basf (linha Alclar®) com diferente peso molecular e carga iônica. Avaliou-se também de forma comparativa, a associação de poliacrilamida em pó e na forma de emulsão, ao hidroxamato para avaliar a redução do consumo de hidroxamato nas refinarias, quando se utiliza o floculante em pó da linha Alclar® associado.
The applications of Gy's formula are appropriate for calculating variances of the fundamental sampling error (FSE) at any stage of the sampling protocol and before samples are collected as well. However, the formula can be inaccurate because general factors are used to estimate the ore characteristic. In order to allow the calculation of fundamental sampling error and the minimum representative sample masses without using Gy's factors, there are experiments to calibrate the sampling parameters, namely: the heterogeneity test (HT); the sampling tree experiment (STE) and the segregation free analysis (SFA). The present work describes the experimental procedure for the three calibration methods using bauxite and shows the correlation between them.
Reconciliation plays a key role in controlling and analysing mine operations. It consists in comparing model estimates with actual results produced by the plant, being used as an indicator, a monitoring tool. Discrepancies between these values are common in the mining industry and they highlight problems during processing steps. However, these discrepancies do not necessarily need to be brought to zero, as long as their order of magnitude is understood. Prognostication, a new concept that seeks to replace reactive reconciliation, aims to raise and correct the real causes of these variations. A common cause of this type of problem is sampling, which in most cases is not performed correctly, providing biased samples and compromising reconciliation analyses. The present study reports, evaluates and improves reconciliation in a bauxite mine located in the city of Poços de Caldas/MG, in Brazil and reports on a study of the heterogeneity of the ore. A common practice of the bauxite mines in Poços de Caldas is to carry out the last stage of sampling manually from the trucks before the ore goes to the treatment plant. The data evidenced that this sampling is biased and systematically overestimates the planned ore grades. In addition, it has been confirmed that the best alternative for the company is to implement a conveyor belt sampler collecting increments every 15 minutes. This method shows the best adherence to the plan, that is 100.7% for available alumina and 83% for reactive silica.
Red mud (RM) is composed of a waste alkaline solution (pH = 13.3) obtained from the production of alumina. It contains high concentrations of soluble hematite (Fe2O3), goetite (FeOOH), gibisite [Al(OH)3], a boemite (AlOOH), anatase (Tetragonal - TiO2), rutile (Ditetragonal dipyramidal - TiO2), hydrogarnets [Ca3Al2(SiO4)3−x(OH)4x], and perovskite (CaTiO3). It was shown to be an excellent catalytic mixture for biodiesel production. To demonstrate the value of RM, an environmentally friendly process of transesterification in aqueous medium using waste cooking oil (WCO), MeOH and waste alkaline solution (WAS) obtained from aluminum production was proposed. Triglycerides of WCO reacted with MeOH at 60 oC to yield mixtures of fatty acid methyl esters (FAMEs) in the presence of 0.019% (w/w) WAS/WCO using the WAS (0.204 mol L-1, predetermined by potentiometric titration) from aluminum production by the Bayer process. The use of the new catalyst (WAS) resulted in a high yield of the products (greater than 99% yield).