Jumpei Kuroda

Mr. Jumpei Kuroda


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2023 in Vibration
Verified
Journal Article
Open access
PDF file
KIKeigo Ikeda
Keigo Ikeda
KKKota Kamimori
Kota Kamimori
IKIkkei Kobayashi
Ikkei Kobayashi
JKJumpei Kuroda
Jumpei Kuroda
DUDaigo Uchino
Daigo Uchino
TNTakayoshi Narita
Takayoshi Narita
Mechanical vibrations adversely affect mechanical components, and in the worst case, lead to serious accidents by breaking themselves. To suppress vibrations, various studies have been conducted on vibration isolation, suppression, and resistance. In addition, technologies to actively suppress vibration have been rapidly developed in recent years, and it has been reported that vibrations can be suppressed with higher performance. However, these studies have been conducted mostly for low-order systems, and few studies have employed control models that consider the complex vibration characteristics of multi-degree-of-freedom (DOF) systems. This study is a basic study that establishes a control model for complex control systems, and the vibration characteristics of a 2-DOF system are calculated using the vibration analysis of a multi-DOF system. Furthermore, the vibration suppression performance of the 2-DOF system is investigated by performing vibration experiments.

30 April 2023 in Vehicles
Verified
Journal Article
Open access
PDF file
IKIkkei Kobayashi
Ikkei Kobayashi
JKJumpei Kuroda
Jumpei Kuroda
DUDaigo Uchino
Daigo Uchino
KOKazuki Ogawa
Kazuki Ogawa
KIKeigo Ikeda
Keigo Ikeda
HKHideaki Kato
Hideaki Kato
The yaw acceleration required for circuit driving is determined by the time variation of the yaw rate due to two factors: corner radius and velocity at the center of gravity. Torque vectoring systems have the advantage where the yaw moment can be changed only by the longitudinal force without changing the lateral force of the tires, which greatly affects lateral acceleration. This is expected to improve the both the spinning performance and the orbital performance, which are usually in a trade-off relationship. In this study, we proposed a yaw moment control technology that actively utilized a power unit with a brake system, which was easy to implement in a system, and compared the performance of vehicles equipped with and without the proposed system using the Milliken Research Associates moment method for quasi-steady-state analysis. The performances of lateral acceleration and yaw moment were verified using the same method, and a variable corner radius simulation for circuit driving was used to compare time and performance. The results showed the effectiveness of the proposed system.

10 July 2023 in Vehicles
Verified
Journal Article
Open access
PDF file
DUDaigo Uchino
Daigo Uchino
IKIkkei Kobayashi
Ikkei Kobayashi
JKJumpei Kuroda
Jumpei Kuroda
KOKazuki Ogawa
Kazuki Ogawa
KIKeigo Ikeda
Keigo Ikeda
TNTakayoshi Narita
Takayoshi Narita
As automated driving has not yet been established, on narrow roads where there is no separation between pedestrians and vehicles, it is essential to switch to manual driving. However, when the driver turns the steering wheel from one hand to another on narrow roads, it causes steering burdens and operational errors if the steering feel or burden is not proper. Thus, this study aims to construct an active steering wheel system that provides an appropriate steering feel or burden by controlling the steering reaction torque, driving position and steering gear ratio for each driver. In this paper, we focused on and examined the driving position among these. A two-dimensional steering model that considers the size of the arms for each driver was established to evaluate steering burden. In addition, a basic study was conducted on the appropriate driving position. Then, based on the joint movements and angles calculation, the appropriate driving position that considers the size of the arms was studied by evaluating the joint power. As a result, it was found that if the steering wheel position is too close to the driver, the amount of joint movement increases, and if it is too far away, the joint movement decreases. Therefore, it was found that the appropriate steering wheel position for each driver’s arm length can be considered by using the joint power.

4 October 2024
Verified
Book Chapter
Open access
PDF file
JKJumpei Kuroda
Jumpei Kuroda
KKKaito Kimura
Kaito Kimura
RORyutaro Ono
Ryutaro Ono
IKIkkei Kobayashi
Ikkei Kobayashi
DUDaigo Uchino
Daigo Uchino
TNTakayoshi Narita
Takayoshi Narita
To enhance internal combustion engine performance, this study focuses on developing an electric valve drive system utilizing linear actuators for intake and exhaust valve control. The linear actuator, comprising a movable coil and a fixed permanent magnet, operates based on the principle of the Lorentz force. Unlike traditional magnetic circuits, this actuator employs five permanent magnets with different magnetization directions to concentrate the flux on the coil. In this study, multiple models with varying ratios of these permanent magnets were created and analyzed using finite element analysis conducted with the JMAG software to investigate the thrust characteristics during the reciprocating motion of the actuator. The vector plot of the magnetic flux density shows that the magnetic circuit is predominantly composed of permanent magnets. The average thrust at a 10 mm displacement was approximately 107 N in the largest model. Future studies will aim to design actuators with increased thrust capabilities.

30 April 2025 in Vehicles
Verified
Journal Article
Open access
PDF file
HYHayato Yamada
Hayato Yamada
MKMasamune Kobayashi
Masamune Kobayashi
YEYusuke Ebashi
Yusuke Ebashi
SKShinobu Kasamatsu
Shinobu Kasamatsu
IKIkkei Kobayashi
Ikkei Kobayashi
HKHideaki Kato
Hideaki Kato
Hybrid vehicles utilize multiple power sources, making them energy-efficient and enhancing both fuel efficiency and dynamic performance. As a result, hybrid vehicles have recently been adopted as race cars, which demand high powertrain performance. The hybrid vehicle system comprises two power sources: an internal combustion engine (ICE) and an electric motor, both of which require precise control. Controlling the output of the internal combustion engine is particularly challenging. This study investigated the dynamic response of an actuator in an electronic throttle system. The experimental results demonstrated that optimized parameters significantly improved the dynamic response. As a result, we propose a mechanism for hybrid vehicle performance and report the characteristics of an electronic throttle. The improvement in throttle opening can be verified by adjusting the P term.

16 January 2026 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
TKTaro Kato
Taro Kato
YTYudai Tanaka
Yudai Tanaka
KSKentaro Sawada
Kentaro Sawada
WWWenbao Wu
Wenbao Wu
IKIkkei Kobayashi
Ikkei Kobayashi
MFMitsuaki Furui
Mitsuaki Furui
In this study, we explored the potential of a compact acoustic control system using giant magnetostrictive actuators (GMAs) for application in ultracompact electric vehicles (EVs), which face significant challenges in maintaining interior acoustic comfort due to their structural limitations. A fundamental investigation was conducted to clarify how differences in the internal structure of GMAs affect their vibration and acoustic output performances. Two GMA prototypes with different internal configurations (Model A, featuring two shorter rods and multiple permanent magnets, and Model B, featuring a single long rod) were evaluated through driving experiments. The acoustic signals were measured using a wall panel setup simulating in-cabin conditions. Both models exhibited an increase in sound pressure level with an increase in the applied voltage. However, the frequency response characteristics differed between the models. Model A performed better in the low-frequency range, whereas Model B maintained consistent performance across a broader frequency range. These findings provide essential insights into the design of space-saving and energy-efficient acoustic systems for next-generation mobility solutions.