The ultra-compact electric vehicle has recently experienced increasing popularity for short-distance travel. However, one of the issues with ultra-compact electric vehicles is that although the engine is silent, exterior road and wind noise have a significant impact on the occupant’s comfort in the interior space. We propose an ANC system whereby a kind of small actuator is installed on the roof of an ultra-compact electric vehicle. In this paper, we consider the noise control effects of using a giant magnetostrictive actuator and conduct an experimental study on feed-forward and feedback control systems.
Active seat suspension has been proposed to improve ride comfort for ultra-compact mobility. Regarding the ride comfort of passengers due to vertical vibration, the authors have confirmed from biometry measurements that reduction of the vibration acceleration does not always produce the best ride comfort for passengers. Therefore, heart rate variability that can quantitatively reflect stress is measured in real time, and a control method was proposed that feeds back to active suspension and confirms its effectiveness by fundamental verification. In this paper, we will confirm the influence of the vibration stress on the psychological state of the occupant by the masking method.
The grasping and conveying of an object by utilizing the frictional force generated by contact are performed during various steps in the process of manufacturing industrial products. Deterioration of the surface quality due to these contacts is a problem. A noncontact way to transport steel plates using electromagnetic force has been proposed as a solution to these problems. In such applications to date, electromagnets are installed in the vertical direction. However, if the steel plate is thin and lacks sufficient flexural rigidity, it is difficult to exert enough suspension force to levitate the entire steel plate. To solve this problem, we propose an edge-supported electromagnetic levitation system suitable for flexible steel plates using electromagnets installed in the horizontal direction. In this paper, we report on levitation experiments to verify the effectiveness of the proposed system and discuss characteristics of the horizontal positioning of electromagnets and levitation suspension.
When an ultrathin and flexible steel plate is to be levitated, levitation control becomes difficult because the ultrathin steel plate undergoes increased flexure. We herein propose a levitation method for an ultrathin steel plate that is bent to an extent that does not induce plastic deformation. In this study, to investigate the levitation stability of an ultrathin steel plate, we applied disturbance cancellation control in the bending levitation system. The object of electromagnetic levitation was a rectangular zinc-coated ultrathin steel plate (SS400) of length 800 mm, 600 mm, and thickness 0.19 mm. The vibrator was attached below the three frames, in which the electromagnet unit was installed so that the frames could be vibrated up and down. We conducted experiments on the levitation performance when the electromagnet was displaced by the frame vibration in the bending levitation system. The results showed that a stable levitation can be achieved even with an input of external disturbance when levitating at the optimum bending angle.
With recent advances in technologies such as those of semiconductors and actuators, easy-to-control compact actuators have been actively applied in various fields such as factory automation and precision machining. In the automobile industry, major manufacturers and venture companies are also concentrating on electric vehicle development. Ultra-compact mobility vehicles, which exhibit an excellent environmental performance and are highly convenient for short-distance movement, are becoming popular. However, owing to cabin space limitations, it is difficult to mount systems such as power steering for assisting steering operations, and such systems are currently not installed in most ultra-compact mobility vehicles. Our research group focused on a steer-by-wire system that does not require a physical connection between the steering wheel and the wheels. Using this system, the steering wheel can be installed without any constraints, and the cabin layout can be easily changed. The reaction torque applied to the steering wheel can be expected to provide an optimum steering feel to each driver by controlling the reaction-force-generating actuator output. Drivers with different heights and arm lengths were then grouped, and arm model calculation and electromyogram measurements obtained during steering operations were used to examine the muscle burden experienced during driving owing to differences in the drivers’ physiques.