Alejandro Pacheco

Dr. Alejandro Pacheco

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2023 in Processes
Verified
Journal Article
Open access
PDF file
J. Camilo Jiménez GarcíaJ. Camilo Jiménez García
J. Camilo Jiménez García
ARAlexis Ruiz
Alexis Ruiz
APAlejandro Pacheco
Alejandro Pacheco
WRWilfrido Rivera
Wilfrido Rivera
It has been demonstrated that energy systems driven by conventional energy sources like fossil fuels are one of the main causes of climate change. Organic Rankine cycles can help to reduce that impact, as they can be operated by using the industrial waste heat of renewable energies. The present study presents a comprehensive bibliographic review of organic Rankine cycles. The study not only actualizes previous reviews that mainly focused on basic cycles operating on subcritical or supercritical conditions, but also includes the analysis of novel cycles such as two-stage and hybrid cycles and the used fluids. Recuperative and regenerative cycles are more efficient than reheated and basic single-stage cycles. The use of two-stage cycles makes it possible to achieve higher thermal efficiencies and net power outputs of up to 20% and 44%, respectively, compared with those obtained with single-stage cycles. Theoretical studies show that hybrid systems, including Brayton and organic Rankine cycles, are the most efficient; however, they require very high temperatures to operate. Most organic Rankine cycle plants produce net power outputs from 1 kW up to several tens of kW, mainly using microturbines and plate heat exchangers.

12 May 2023 in Preprints.org
Verified
Preprint
Open access
PDF file
J. Camilo Jiménez GarcíaJ. Camilo Jiménez García
J. Camilo Jiménez García
ARAlexis Ruiz
Alexis Ruiz
APAlejandro Pacheco
Alejandro Pacheco
WRWilfrido Rivera
Wilfrido Rivera
Climate change is one of the main issues that humanity is currently facing due to carbon dioxide emissions caused by the use of fossil fuels. Organic Rankine cycles may play an important role in reducing these emissions since they can be operated by using industrial waste heat of renewable energies. The present study presents a comprehensive bibliographic review of organic Rankine cycles. The study not only actualizes previous reviews that mainly focused on basic cycles operating on subcritical or supercritical conditions but also includes the analysis of novel cycles such as two-stage and hybrid cycles and the used fluids. Recuperative and regenerative cycles are more efficient than reheated and basic single-stage cycles. The use of two-stage cycles makes it possible to achieve higher thermal efficiencies and net power outputs of up to 20% and 44%, respectively, compared with those obtained with single-stage cycles. Theoretical studies show that hybrid systems, including Brayton and organic Rankine cycles, are the most efficient; however, they require very high temperatures to operate. Most organic Rankine cycle plants produce net power outputs from 1 kW up to several tens of kW, mainly using microturbines and plate heat exchangers.

9 March 2020 in Processes
Verified
Journal Article
Open access
PDF file
WRWilfrido Rivera
Wilfrido Rivera
KSKaren Sánchez-Sánchez
Karen Sánchez-Sánchez
Javier Alejandro HernándezJavier Alejandro Hernández
Javier Alejandro Hernández
J. Camilo Jiménez GarcíaJ. Camilo Jiménez García
J. Camilo Jiménez García
APAlejandro Pacheco
Alejandro Pacheco
Thermodynamic cycles to produce power and cooling simultaneously have been proposed for many years. The Goswami cycle is probably the most known cycle for this purpose; however, its use is still very limited. In the present study, two novel thermodynamic cycles based on the Goswami cycle are presented. The proposed cycles use an additional component to condense a fraction of the working fluid produced in the generator. Three cycles are modeled based on the first and second laws of thermodynamics: Two new cycles and the original Goswami cycle. The results showed that in comparison with the original Goswami cycle, the two proposed models are capable of increasing the cooling effect, but the cycle with flow extraction after the rectifier presented higher irreversibilities decreasing its exergy efficiency. However, the proposed cycle with flow extraction into the turbine was the most efficient, achieving the highest values of the energy utilization factor and the exergy efficiency. It was found that for an intermediate split ratio value of 0.5, the power produced in the turbine with the flow extraction decreased 23% but the cooling power was 6 times higher than that obtained with the Goswami Cycle.

25 June 2025 in Processes
Verified
Journal Article
Open access
PDF file
APAlejandro Pacheco
Alejandro Pacheco
J. Camilo Jiménez GarcíaJ. Camilo Jiménez García
J. Camilo Jiménez García
Geydy Gutiérrez-UruetaGeydy Gutiérrez-Urueta
Geydy Gutiérrez-Urueta
JSJuliana Isabel Saucedo-Velázquez
Juliana Isabel Saucedo-Velázquez
WRWilfrido Rivera
Wilfrido Rivera
This study proposes a polygeneration system that integrates an absorption cooling system, a heat transformer, and an organic Rankine cycle for the simultaneous production of power, cooling, and freshwater—the former operating with a water/lithium bromide mixture while the organic Rankine cycle operates with R123. The system was simulated at temperatures between 100 °C and 150 °C and with heat supply capacities that a geothermal field in Nayarit, Mexico, could provide. A parametric analysis was conducted by developing a mathematical model using the Engineering Equation Solver software. The geothermal source temperatures, ambient temperatures, and mass ratios were varied to determine the power, cooling load, freshwater production, and energy utilization factor under different operating conditions. The results showed that the system could produce up to 13 kW of power, 100 kW of cooling, and 50 L per hour at a heat source temperature of 150 °C. The energy utilization factor varied from 0.32 to 0.43, which means that up to 43% of the energy supplied to the system could be utilized to produce cooling, freshwater, or power.

9 January 2025 in Processes
Verified
Journal Article
Open access
PDF file
JGJavier Delgado Gonzaga
Javier Delgado Gonzaga
WRWilfrido Rivera
Wilfrido Rivera
J. Camilo Jiménez GarcíaJ. Camilo Jiménez García
J. Camilo Jiménez García
APAlejandro Pacheco
Alejandro Pacheco
DRDavid Juárez Romero
David Juárez Romero
This study proposes a cogeneration system for the simultaneous production of cooling and freshwater. A double-stage cascade compression cooling system consists of two interconnected vapor compression cycles. The proposed system integrates a double-stage cascade compression cooling system with a water desalination unit, which takes advantage of the heat released by the cascade system. The system performance was evaluated using various refrigerants selected based on their energy efficiency, environmental impact, and widespread use. Multiple combinations of the fluids were used in the high-temperature cycle (HTC) and low-temperature cycle (LTC) to analyze their impact on system performance. A parametric analysis was conducted by developing a mathematical model in MATLAB. The model’s input parameters were the evaporation temperature and the temperature difference between the inlet and discharge of both compressors (ΔLTC and ΔHTC). System performance was assessed from a first-law point of view through the coefficient of performance (COP), the energy utilization factor (EUF), and the gain output ratio (GOR). The results revealed that the maximum (105 °C) and minimum (−13 °C) temperatures, essential for desalination and cooling, respectively, were achieved using R134a in the LTC and R123 in the HTC, with ΔLTC = 65 °C and ΔHTC = 70 °C. However, the best performance was observed with R123 in both cycles, with ΔLTC = 45 °C and ΔHTC = 70 °C. This configuration achieved a COP of 1.06, a GOR of 1.61, and an EUF of 2.74.

28 January 2025 in Resources
Verified
Journal Article
Open access
PDF file
APAlejandro Pacheco
Alejandro Pacheco
JSJuliana Isabel Saucedo-Velázquez
Juliana Isabel Saucedo-Velázquez
Geydy Gutiérrez-UruetaGeydy Gutiérrez-Urueta
Geydy Gutiérrez-Urueta
WRWilfrido Rivera
Wilfrido Rivera
More efficient systems and renewable energies are determinants of reducing the negative impact on the environment. A novel cogeneration system is modeled for the simultaneous production of power and cooling driven by geothermal energy utilizing an ammonia–water mixture. The system can be used in rural communities by using renewable energies or in industries where waste heat is available. The system is a modification of a Goswami cycle in which a separator has been added to produce an extra amount of ammonia vapor to increase the cooling effect. Energy and exergy analyses are conducted as a function of the main operating temperatures. From the optimization, it is found that the maximum energy utilization factor is 0.54, and the exergy efficiency is 0.37, producing 81.45 kW of power and 1068 kW of cooling. A case study is also conducted for a rural community located in the estate of Jalisco, México. The proposed system is capable of preserving 3750 L of milk/day while simultaneously producing 12.53 kW of power when 230.6 kW of geothermal energy is supplied at 120 °C.