Experimental results for the transient heat transfer characteristics over a flat plate and over a plate with V-shaped ribs were compared to numerical results from a coupling environment applying FEM and CFD. In order to simulate transient effects in the cooling process of engine components during typical flight missions, the temperature and the velocity at the inlet of the channel were varied over time. The transient temperature distribution at the plate was measured using infrared thermography. Five different plate materials (perspex, PEEK, quartz, aluminum, and steel) were considered to investigate the influence of thermal conduction on the heat transfer between solid and fluid depending on the Biot number. The experimental results represent a reference database for a Python-based coupling environment applying CalculiX (FEM) and ANSYS CFX (CFD). The results were additionally compared to numerical results simulating the complete transient conjugated heat transfer with CFD. A good agreement between the numerical and the experimental results was achieved using different coupling sizes at different Biot numbers for the flat plate and the plate with V-shaped ribs.
Transient conjugate heat transfer measurements under varying temperature and velocity inlet boundary conditions at incompressible flow conditions were performed for flat plate and ribbed channel geometries. Therefrom, local adiabatic wall temperatures and heat transfer coefficients were determined. The data were analyzed using typical heat transfer correlations, e.g., , determining the local distributions of C and m. It is shown that they are closely linked. A relationship is observed, with A and B as modeling parameters. They could be related to parameters in log-law or power-law representations for turbulent boundary layer flows. The parameter m is shown to have a close link to local pressure gradients and, therewith, near wall streamlines as well as friction factor distributions. A normalization of the C parameter allows one to derive a Reynolds analogy factor and, therefrom, local wall shear stresses.
Transient conjugate heat transfer measurements under varying temperature and velocity inlet boundary conditions at incompressible flow conditions were performed for flat plate and ribbed channel geometries. Therefrom local adiabatic wall temperatures and heat transfer coefficients are determined. Those data are analyzed using typical heat transfer correlations, e.g. Nu=CRe^mPr^n determining the local distribution of C and m. It is shown that they are closely linked. A relationship lnC=A−mB is observed with A and B as modeling parameters. They could be related to parameters in log law or power law representations for turbulent boundary layer flows. The parameter m is shown to have a close link to local pressure gradients and therewith near wall streamlines as well as friction factor distributions. A normalization of the C parameter allows to derive a Reynolds analogy factor and therefrom local wall shear stresses.
Fluid-Structure interaction has a significant impact on heat transfer in aero engines. Thermal interaction of solid and gas appears e.g. for secondary flow cavities in compressor and turbines. Coupled multiphysics simulations including three systems CFD, structure analysis and gas network can significantly improve quality and efficiency of conjugate heat transfer analysis. A method for fluid-structure coupling for special purpose demands of aero engines heat transfer is presented. It is based on a partitioned approach designed to guarantee for standard processes, methods and tools (like mapping methods and solvers) for industrial applications and implemented as central coupling control software (Cosmix) flexible in embedding respective modules on demand. Fluid temperatures show much faster reaction than material temperatures and time scales differ for the respective domains. Typically a thermal flight mission analysis of solid material is resolved in very fine time steps to optimally represent the transient behavior during a flight cycle. An implicit fluid-structure coupling approach delivers transient mission temperatures, which are prerequisites for an elaborated lifing analysis. It is an efficient approach to take the interaction with fluids into account is to embed steady state or stationary CFD analyses for much fewer steps at characteristic operational points. Since those point are irregularly spread over the mission subiterations over time periods with several solid time steps are realized. To improve the prediction within these time periods the method is enhanced by using transition curves for prediction and fluid load scaling. Transitions curves results from engineering approaches like test data, analytical studies and further experience. Within this method the solid model prescribes the time. Thermal analysis of aero engines is often based on 2D rotational symmetric finite element models. Therefore not only mapping on non-matching grids interfaces of 3D models but also mapping from 3D to 2D models and back is implemented including averaging methods. The multiphysics method includes the coupling of the advective system representing the secondary air system with mapping of interface data and global convergence control respectively. The coupling method is validated with experimental data for conjugate heat transfer. A V-ripped channel has been transiently measured and simulated. Comparisons are carried out for different CFD coupling time strategies. Applications of academic and industrial type will be presented. The method has been used for thermal coupling of a typical engine low-pressure turbine inner air seal and further secondary flow cavities in compressor and turbines.