Fast-growing interests in safe and effective robot-environment interactions stimulated global investigations on soft robotics. The inherent compliance of soft robots ensures promising safety features but drastically reduces force capability, thereby complicating system modeling and control. To tackle these limitations, a soft robotic joint with enhanced strength, servo performance, and impact behavior shaping is proposed in this paper, based on novel three-dimensional-printed soft origami rotary actuators. The complete workflow is presented from the concept of origami design and analytical modeling, joint design, fabrication, control, and validation experiments. The proposed approach facilitates a fully customizable joint design towards the desired force capability and motion range. Validation results from models and experiments using multiple fabricated prototypes proved the excellent performance linearity and superior force capability, with 18.5-N·m maximum torque under 180 kPa, and 300-g self-weight. The behavior shaping capability is achieved by a low-level joint-angle servo and a high-level variable-stiffness regulation; this significantly reduces the impact torque by 53% and ensures powerful and safe interactions. The comprehensive guidelines provide insightful references for soft robotic design for wider robotic applications.
17 December 2020 in IEEE/ASME Transactions on Mechatronics
Wearable robotic devices are receiving rapidly growing attentions for human-centered scenarios from medical, rehabilitation, to industrial applications. Supernumerary robotic limbs have been widely investigated for the augmentation of human limb functions, both as fingers and manipulator arms. Soft robotics offers an alternative approach to conventional motor-driven robot limbs towards safer and lighter systems, while pioneering soft supernumerary limbs are strongly limited in payload and dexterity by the soft robotic design approach, as well as the fabrication techniques. In this work, we proposed a wearable supernumerary soft robot for the human forearm, inspired by the fore flippers of otariids (eared seals). A flat flipper design was adopted, differing from the finger or arm shaped state-of-the-art works, with multiple soft actuators embedded as different joints for manipulation dexterity. The soft actuators were designed following origami (the art of paper folding) patterns, reinforced by kirigami (the art of paper cutting) fabrics. With this new approach, the proposed soft flipper incorporated 8 independent muscles, achieving over 20 times payload to self-weight ratio, while weighing less than 500g. The versatility, dexterity, and payload capability were experimentally demonstrated using a fabricated prototype with proprietary actuation and control. This work demonstrates the feasibility and unique advantages for origami + kirigami soft robots as a new approach to strong, dexterous, and yet safe and lightweight wearable robotic devices.
5 April 2023 in IEEE Robotics and Automation Letters
In this letter, we propose a novel framework for tactile-based dexterous manipulation learning with a blind anthropomorphic robotic hand, i.e. without visual sensing. First, object-related states were extracted from the raw tactile signals by a graph-based perception model - TacGNN. The resulting tactile features were then utilized in the policy learning of an in-hand manipulation task in the second stage. This method was examined by a Baoding ball task - simultaneously manipulating two spheres around each other by 180 degrees in hand. We conducted experiments on object states prediction and in-hand manipulation using a reinforcement learning algorithm (PPO). Results show that TacGNN is effective in predicting object-related states during manipulation by decreasing the RMSE of prediction to 0.096 cm comparing to other methods, such as MLP, CNN, and GCN. Finally, the robot hand could finish an in-hand manipulation task solely relying on the robotic own perception - tactile sensing and proprioception. In addition, our methods are tested on three tasks with different difficulty levels and transferred to the real robot without further training.