Biosciences, Biotechnology Research Asia is an international, open access, peer reviewed research journal covering all aspects of Biosciences and Biotechnology field.
1 January 2024 in International Journal of Energy Research
In this study, pilot‐scale experiments were performed on the anaerobic digestion (AD) in a semicontinuous process using a continuously stirred tank reactor to determine the effects of organic loading rate (OLR), temperature, and mixing levels on biogas production yield. Fresh cow manure was considered the input feedstock of this study due to its high production volume. Response surface methodology (RSM) was employed to design and analyze experiments to optimize OLR, temperature, and mixing intensity in biogas production. The central composite design was applied as a RSM optimization tool. Four cubic mathematical models were derived to predict the responses. The optimization study was carried out to identify the highest yields achievable when temperature and mixing factors are minimized. Temperature and OLR have been found to have a greater influence on biogas production compared to mixing intensity. The AD process is significantly influenced by temperature. Variations in temperature, specifically near 40 and 55°C, lead to an increase in the rate of biogas production. Therefore, the best temperatures for biogas production rate are near 40 and 55°C. The results of the performed optimizations suggest to adopt OLR values range of 1.6–2.5 kgVSCow manure/m3 · day, and 2.5–3.4 kgVSCow manure/m3 · day in the case of temperature ranges 20–40°C and 40–55°C, respectively.
1 January 2024 in International Journal of Chemical Engineering
All the inputs and outputs of a technical system can be interpreted from an environmental point of view. Using the life cycle assessment (LCA) approach, some changes that are less harmful to the environment can be included in the system. This research aims to evaluate the environmental effects of the wastewater treatment plant (WWTP) in South Tehran, and the LCA method was used in this study. Based on the data of qualitative parameters obtained from the measurement of Tehran province’s water and sewage company, the environmental emissions were calculated and analyzed using SimaPro software (9.0.0) and the standards defined under the ReCiPe 2016‐midpoint method. In the ReCiPe 2016 method, the results were expressed in two intermediate levels (including three classes of influence) and final (including 18). The results showed that the treated wastewater and chlorine factors had the most adverse environmental effects. Among the 18 effect classes, the treated wastewater in the class of marine environmental toxicity with the amount of 101.1531 kg 1,4‐DCB had the most environmental impacts among other classes. The power consumed by the biogas‐burning combined heat and power (CHP) unit in the wastewater treatment (WWT) process reduced the environmental effects in most impact classes. The most adverse environmental effects of the WWT process are related to damage to human health and the ecosystem. According to the findings, the use of CHP systems is suggested for energy saving and also for reducing harmful effects on the environment.
1 January 2025 in International Journal of Energy Research
Cleaner energy, particularly biogas, is urgently needed. Biogas is generated via anaerobic digestion (AD), decomposing organic materials without oxygen. AD simulation models are appreciated for their cost‐effectiveness and predictive accuracy. This study creates a process model with Aspen Plus to simulate AD and biogas production. Investigations simulated municipal solid waste (MSW), animal manure (AM), and co‐digestion feedstock, including hydrolysis equations for carbohydrates, proteins, and fats. MSW includes a water flow of 10°C and 1500 m 3 /day. The AM enters at 230.4 g/day, while water flows into the mixer at 2300 g/day. The biogas rates for MSW, AM, and co‐digestion were 9775.663, 0.25, and 10024.98 m 3 /day, respectively. Increasing hydraulic retention time (HRT) boosts the biogas production rate. The carbohydrate effect increases biogas rates for MSW and co‐digestion feedstock by 65% and 25%, respectively. Carbohydrate content increases from 35% to 55% for AM feedstock, with rising gas production and a linear decrease in methane output. With the increase in protein, the percentage of gas production increases in all cases. Although for MSW, the optimal conditions occurred between 16% and 20% of protein. Gas production drops with fat in MSW but rises in AM. A 50% increase in parameters shows co‐digestion is more affected by protein.
15 December 2022 in Environmental Engineering Research
Anaerobic co-digestion of primary and secondary sewage sludge and Cladophora green algae was investigated under mesophilic temperature conditions. The design of experiment method and the optimal mixture design were used to systematically optimize the substrate composition ratios and elucidate the possible synergistic effects for an anaerobic digestion system. A reduced cubic model was created by Design-Expert software as a function of substrate composition ratios. The model was validated by ANOVA experimentally. Also, the substrate composition ratio's effects on variations in biogas production were studied. All linear impacts on changes in biogas production were significantly observed, and interactions between substrates in combined digestion had synergistic impacts on biogas production rate. The highest amount of biogas (235.17-296.03 ml/g VS) was obtained with ratios of equal to 70-60%, B equal to 0-17%, and C equal to 18-30%. Eventually, the model optimization was performed to predict the optimal conditions to achieve the maximum biogas production rate. It was seen that the predicted and actual values of produced biogas in favorable conditions with an error of about 1.3% are well consistent. The authors conclude that the optimal mixture design can be utilized to assess the optimal composition of substrates in an anaerobic digestion system.