The integration of electronics into the process flow of the additive manufacturing of 3D objects is demonstrated using water soluble films as a temporary flexible substrate. Three process variants are detailed to evaluate their capabilities to meet the additive manufacturing requirements. One of them, called water transfer printing, shows the best ability to fabricate electronics onto 3D additively manufactured objects. Moreover, a curved capacitive touchpad hidden by color films is successfully transferred onto the 3D objects, showing a potential application of this technology to fabricate fully additively manufactured discrete or even hidden electronic devices.
The need for the fabrication of a new generation of devices has developed with the next generation of ‘home’ engineers, which is resulting in an ever-increasing population interested in “do-it-yourself” electronics and the Internet of Things. However, this new trend should not be done at the expense of the environment. Almost all previous studies, related to the low-temperature processing of devices, fail to highlight the extent of the impact that the synthesis of these technologies have on both the environment and human health. In addition, the substrates typically used, are also often associated with major drawbacks such as a lack of biodegradability. In this paper, we fabricate a simple RC filter using various domestically available printing techniques, utilising readily available materials such as: carbon soots (carbon black) as an electric conductor, and egg white (albumen) as a dielectric. These devices have been fabricated on both polyethylene terephthalate (PET) and paper, which demonstrated the same performances on both substrates and revealed that recyclable substrates can be used without compromise to the devices’ performance. The filter was found to exhibit a cut-off frequency of 170 kHz, which made it suitable for high-frequency reception applications.
10 April 2019 in The Journal of Electronic Publishing
Silicon nanowires (SiNWs) based resistors used as bacteria sensors are fabricated using the classical silicon technologies. SiNWs are grown by vapor liquid solid (VLS) method using gold as catalyst. Electrodes of the device are made of heavily in-situ doped polycristalline silicon. Results show potential use of the corresponding resistors, with SiNWs as sensitive units, for bacteria detection. Bacteria are preferentially hanged into SiNWs array and electrical resistance of the device decreases due to the presence of bacteria. Such resistors are promising bacteria sensors to monitor contamination in controlled environment for hygiene, fabricated in a simple and low-cost fabrication technology.