Elena Anan'eva

Dr. Elena Anan'eva

scientific department, Altai State Technical University, Barnaul, Altayskiy Kray, Russia
orcid
кандидат технических наук, доцент

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2014 in Theoretical Foundations of Chemical Engineering
Verified
Journal Article
Closed access
PDF file
AVA. A. Vasil’EVa
A. A. Vasil’EVa
AKA. K. Kychkin
A. K. Kychkin
EAElena Anan'eva
Elena Anan'eva
MLM. P. Lebedev
M. P. Lebedev
The results of investigations into the chemical and mineralogical composition of potentially suitable petrurgical raw materials of the Vasil’evka deposit for producing continuous basalt fibers and composite materials on its basis are presented. Electron probe microanalysis and petrographic analysis are used. The performed investigations proved the possibility of obtaining continuous basalt fibers based on basalt from the Vasil’evka deposit in Yakutia, since its composition and main characteristics correspond to requirements imposed on petrurgical raw materials by the viscosity modulus, the pyroxene composition, the presence of phase transformations, etc.

1 January 2019 in Procedia Structural Integrity
Verified
Journal Article
Open access
AKAisen Kychkin
Aisen Kychkin
EAElena Anan'eva
Elena Anan'eva
KТK.I. Таnkоva
K.I. Таnkоva
AKA.K. Kychkin
A.K. Kychkin
AТA.G. Тuisov
A.G. Тuisov

9 June 2023 in Polymers
Verified
Journal Article
Open access
PDF file
ATAleksei G. Tuisov
Aleksei G. Tuisov
AKAisen Kychkin
Aisen Kychkin
AKAnatoly Kychkin
Anatoly Kychkin
EAElena Anan'eva
Elena Anan'eva
Polymer binders based on epoxy resins have unique properties that contribute to their use in many composite industries. The potential of using epoxy binders is due to their high elasticity and strength characteristics, thermal and chemical resistance, and resistance to climatic aging. This is the reason for the existing practical interest in modifying the composition of epoxy binders and understanding the strengthening mechanisms in order to form reinforced composite materials with a required set of properties based on them. This article presents the results of a study of the process of dissolving the modifying additive of polymethylene-p-triphenyl ether of boric acid in the components of an epoxyanhydride binder applicable to the production of fibrous composite materials. The temperature and time conditions for the dissolution of polymethylene-p-triphenyl ether of boric acid in anhydride-type isomethyltetrahydrophthalic anhydride hardeners are presented. It has been established that the complete dissolution of the borpolymer-modifying additive in iso-MTHPA occurs at a temperature of 55 ± 2 °C for 20 h. The effect of the modifying additive of polymethylene-p-triphenyl ether of boric acid on the strength properties and structure of the epoxyanhydride binder has been studied. Increases in transverse bending strength up to 190 MPa, elastic modulus up to 3200 MPa, tensile strength up to 0.8 MPa, and impact strength (Charpy) up to 5.1 kJ/m2 are observed when the content of the borpolymer-modifying additive in the composition of the epoxy binder is 0.50 mass. %.

1 February 2016 in International Polymer Science and Technology
Verified
Journal Article
Open access
DKD.V. Korabel'NIkov
D.V. Korabel'NIkov
MLM.A. Lenskii
M.A. Lenskii
AOA.V. Ozhogin
A.V. Ozhogin
ANA.S. Nartov
A.S. Nartov
EAElena Anan'eva
Elena Anan'eva

10 July 2023 in Ползуновский вестник
Verified
Journal Article
Open access
PDF file
КАКычкин Айсен Анатольевич Кычкин Айсен Анатольевич
Кычкин Айсен Анатольевич Кычкин Айсен Анатольевич
AKAnatoly Kychkin
Anatoly Kychkin
ATAleksei Tuisov
Aleksei Tuisov
МЛМихаил Петрович Лебедев
Михаил Петрович Лебедев
EAElena Anan'eva
Elena Anan'eva
Исследовано влияние углеродных нанотрубок (УНТ) на свойства эпоксидного связующего. При помощи электронномикроскопических исследований показано изменение надмолекулярной структуры с образованием упорядоченных структур при введении углеродных наночастиц в эпоксидное связующее на основе эпоксидной смолы ЭД-20 и отвердителя изо-метила-тетрагидрофталевого ангидрида (Изо-МТГФА). Проанализирована возможность и эффективность применения ультразвукового диспергирования УНТ в объеме связующего. Проведены исследования влияния содержанием УНТ от 0 до 0,5 масс. % в составе эпоксидного связующего на предел прочности и модуль упругости при растяжении и сжатии, ударную вязкость по Шарпи. Установлено, что при введении УНТ в состав эпоксидного связующего наблюдается изменение вязко-упруго-прочностных свойств. Экспериментально определено, что модификация концентратом на основе УНТ ведет к увеличению модуля упругости при растяжении и сжатии и ударной вязкости. При содержании УНТ в составе эпоксидного связующего в интервале 0,25 масс. % ‒ 0,5 масс. %, наблюдается увеличение модуля упругости при растяжении на 32 % и модуля упругости при сжатии на 10 %.

29 March 2024 in Ползуновский вестник
Verified
Journal Article
Open access
PDF file
ДАДудкевич Инна Алексеевна Дудкевич Инна Алексеевна
Дудкевич Инна Алексеевна Дудкевич Инна Алексеевна
EAElena Anan'eva
Elena Anan'eva
Increasing the accuracy of the data obtained, the stability of well exploration results, improving the strength properties of the radio-transparent body, and as a result, increasing the service life of the geophysical instrument is impossible without diagnosing the properties of the body material and assessing load levels that can lead to the loss of the material’s load-bearing capacity. The influence of different cyclic loading schemes on the shape and dimensions of the inelastic loop was studied when testing ring-shaped fiberglass samples(0º-90º) made by obliquely longitudinally winding glass fiber based on aluminoborosilicate and magnesium aluminoborosilicate glass. As a result of studying the influence of loading schemes, a change in the shape and loop of inelasticity and a transition from the relaxation type of inelasticity to the hysteresis type of inelasticity due to the accumulation of residual deformations when changing the loading angle from 30º to 45º and increasing the load amplitude were shown. The results of sample destruction under loading schemes are similar to the loading conditions in operation and can be used to evaluate the destruction process. Повышение точности получаемых данных, стабильности результатов исследования скважин, улучшение прочностных свойств радиопрозрачного корпуса, и как следствие, повышение ресурса геофизического прибора невозможно без диагностики свойств материала корпуса и оценки уровней нагрузок, способных привести материал к потере несущей способности. Исследовано влияние разных схем циклического нагружения на форму и размеры петли неупругости при испытаниях кольцевых образцов из стеклопластика (0 º‒90 º), изготовленных методом косослойно-продольно-поперечной намотки стеклянного волокна на основе алюмоборосиликатного и магнийалюмоборосиликатного стекла. В результате исследования влияния схем нагружения было показано изменение формы и петли неупругости и переход от релаксационного типа неупругости к неупругости гистерезисного типа из-за накопления остаточных деформаций при изменении угла нагружения с 30 º на 45 º и увеличении амплитуды нагрузки. Результаты разрушения образцов при схемах нагружения аналогичны условиям нагружения в эксплуатации и могут быть использованы для оценки процесса разрушения.