This paper details the development and validation of a temperature sensing methodology using an un-trimmed oscillator-based integrated sensor implemented in the 0.18-m SOI XFAB process, with a focus on thermal monitoring in system-on-chip (SoC) based DC-DC converters. Our study identifies a quadratic relationship between the oscillator output frequency and temperature, which forms the basis of our proposed calibration mechanism. This mechanism aims at mitigating process variation effects, enabling accurate temperature-to-frequency mapping. Our research proposes and characterizes several trimming-free calibration techniques, covering a spectrum from zero to thirty-one frequency-temperature measurement points. Notably, the Corrected One-Point calibration method, requiring only a single ambient temperature measurement, emerges as a practical solution that removes the need for a temperature chamber. This method, after adjustment, successfully reduces the maximum error to within °C. Additionally, the Two-Point calibration method demonstrates improved precision with a maximum positive error of +1.56 °C at −15 °C and a maximum negative error of −3.13 °C at +10 °C ( value of 0.9958). The Three-Point calibration method performed similarly, yielding an value of 0.9956. The findings of this study indicate that competitive results in temperature sensor calibration can be achieved without circuit trimming, offering a viable alternative or a complementary approach to traditional trimming techniques.
This paper presents a systematic approach for Zeta power converter control, a versatile solution designed for systems where the power supply is prone to fluctuations. The optimized controller exploits a detailed model of the power stage and adjusts the system parameters to ensure stability over a wide range of loads and loading conditions. A detailed model for the Zeta converter is developed, considering important power stage parameters such as the ON resistance of power transistors and inductor series resistance. The control strategy utilizes a phase-locked loop, which includes a loop filter along with an additional lead compensator circuit to improve the loop phase margin, thereby enhancing the system’s dynamic response and stability. The proposed graphical approach facilitates intuitive controller design and tuning, providing a robust framework for managing converter dynamics. The system stability and performance are validated through extensive transient simulations using a standard 180 nm CMOS technology, demonstrating the converter’s effectiveness in maintaining stable output under variable input conditions. Experimental results show that the proposed closed-loop Zeta converter can achieve a peak efficiency of 94% when the load resistance is 10 Ω, and it can handle current loads up to 3A. The system operates at a switching frequency of 85 kHz and can support an input voltage range from 6V to 34V while maintaining stable output. During reference tracking tests, the system demonstrates excellent transient response, with a settling time of 12.5 ms and a peak overshoot of 3.9V. Additionally, compared to similar works, the system exhibits superior normalized transient load regulation, highlighting the robustness of the proposed control strategy.
One of the fast-growing electronic integration technologies in the modern high-density microelectronics industry is System-in-Package (SiP). It is expected to accelerate application development when reducing implementation risks with optimized codes. However, monitoring the thermal behavior of every chip in SiPs is challenging. This paper proposes a Novel Peak Source-Scanning (NPSS) algorithm based on the Gradient Direction Sensors (GDS) method. The proposed algorithm can detect and locate thermal peaks on any SiP. Detecting such peaks is vital for thermal monitoring and stress management on high-density semiconductor devices to avoid induced thermo-mechanical stresses. Furthermore, the NPSS algorithm can manage and monitor silicon chips with Multiple Heat Sources (MHS). To assess this algorithm, we used tools from COMSOL Multiphysics® and MATLAB® for Temperature-prediction (Tp), and Temperature-estimation (Te), respectively. Our simulations use the generalized GDS methodology for MHS using the finite element method (FEM) to highlight our NPSS capabilities to predict on-chip thermal peaks with a maximum error of 1.27 K (Kelvin).