Chao-Jian He

Dr. Chao-Jian He


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 May 2017 in IEEE Journal of Selected Topics in Quantum Electronics
Verified
Journal Article
Closed access
HYHaijuan Yu
Haijuan Yu
YQYaoyao Qi
Yaoyao Qi
JZJingyuan Zhang
Jingyuan Zhang
SZShuzhen Zou
Shuzhen Zou
Ling ZhangLing Zhang
Ling Zhang
XLXuechun Lin
Xuechun Lin
We report a 166 W burst mode pulse fiber amplifier seeded by a Q-switched mode-locked all-fiber laser at 1064 nm based on a fiber-coupled semiconductor saturable absorber mirror. With a pump power of 230 W at 976 nm, the output corresponds to a power conversion efficiency of 74%. The repetition rate of the burst pulse is 20 kHz, the burst energy is 8.3 mJ, and the burst duration is ∼ 20 μ s, which including about 800 mode-locked pulses at a repetition rate of 40 MHz and the width of the individual mode-locked pulse is measured to be 112 ps at the maximum output power. To avoid optical damage to the fiber, the initial mode-locked pulses were stretched to 72 ps by a bandwidth-limited fiber bragg grating. After a two-stage preamplifier, the pulse width was further stretched to 112 ps, which is a result of self-phase modulation of the pulse burst during the amplification.

17 December 2020 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
SZShuzhen Zou
Shuzhen Zou
HYHai Juan Yu
Hai Juan Yu
JZJiexi Zuo
Jiexi Zuo
SXShuang Xu
Shuang Xu
CNChaoyu Ning
Chaoyu Ning
XLXuechun Lin
Xuechun Lin
We present the design and fabrication of a 4×1 fiber combiner with low brightness loss. The effective area ratio (AR) of light transmission was first introduced to estimate the brightness loss. A square core fiber was used as the output fiber of the fiber combiner to achieve a high AR. The adiabatic criterion for tapering multimode fibers was investigated to obtain the structure parameters required for the fabrication. We used an auxiliary fiber of appropriate size to achieve a regular squared fiber bundle and improve bundle cutting and splicing quality. The fiber combiner yielded a high average power transmission efficiency of 97.8% when the brightness ratio was 1.05. In addition, the output power of 1030 W was obtained by combining two LDs. This type of fiber combiner can produce multi-kilowatts laser by combining high power LDs or fiber lasers. And it can be flexibly applied in laser welding, laser cladding, and laser cleaning.

1 October 2018 in Optics & Laser Technology
Verified
Journal Article
Closed access
Chao-Jian HeChao-Jian He
Chao-Jian He
HYHaijuan Yu
Haijuan Yu
JZJingyuan Zhang
Jingyuan Zhang
SZShuzhen Zou
Shuzhen Zou
Ling ZhangLing Zhang
Ling Zhang
XLXuechun Lin
Xuechun Lin


3 February 2026 in Photonics
Verified
Journal Article
Open access
PDF file
WWWenjuan Wu
Wenjuan Wu
SZShuzhen Zou
Shuzhen Zou
HYHaijuan Yu
Haijuan Yu
Chao-Jian HeChao-Jian He
Chao-Jian He
Song YangSong Yang
Song Yang
High-power chirped amplitude-modulated (CAM) lasers serve as essential sources for the promising high-precision single-photon differential ranging technique. However, the development of high-power CAM lasers is fundamentally constrained by the stimulated Brillouin scattering (SBS) effect and the degradation of the CAM waveform during amplification. In this work, we propose a high-power CAM fiber laser system based on a dual linear frequency modulation (dual-LFM) architecture, wherein LFM signals are applied simultaneously to both the phase modulator and the intensity modulator. The experimental results demonstrate effective suppression of SBS, which enables an approximately eightfold enhancement in average output power—from 32.1 W to 256.5 W—while maintaining well-preserved CAM waveforms and a near-diffraction-limited beam quality (M2 = 1.073). To the best of our knowledge, this represents the highest output power reported to date for CAM lasers. Significantly, after amplification, the system exhibits a mere ~2% reduction in average modulation depth, attaining a final modulation depth of over 82%, a total harmonic distortion below 7%, and excellent CAM linearity across the 100 MHz to 1 GHz modulation frequency range. Furthermore, the proposed laser system enables single-photon differential ranging with millimeter-level precision over distances exceeding 100 km. This work represents a significant advancement in CAM laser power scaling, with potential applications in advanced precision ranging, quantum technology, and related emerging fields.