Based on the general structure of mechanical systems described by their state-space representation, the Takagi-Sugeno fuzzy modelling, and the controllability property of fuzzy systems, an algebraic and practical approach to compute the fuzzy gain capable of ensuring the stability property of the Takagi-Sugeno fuzzy model is proposed. The main idea consists of finding a continuous fuzzy gain such that, any linear behavior, defined by the adequate selection of eigenvalues, is induced in the closed-loop fuzzy system. Therefore, by continuity, if the fuzzy model is an approximation sufficiently close to the mechanical system, then such a nonlinear system is also stabilized by the fuzzy controller. A notable advantage of the proposed method, when compared with similar approaches, is the simplicity of the resulting gain. The validity of the approach is illustrated through the numerical simulation of a sufficiently complex nonlinear system.
Unmanned Aerial Vehicles (UAVs) have gained significant attention due to their versatility in applications such as surveillance, reconnaissance, and search-and-rescue operations. In GPS-denied environments, where traditional navigation systems fail, the need for alternative solutions is critical. This paper presents a novel visual-based Simultaneous Control, Localization, and Mapping (SCLAM) system tailored for UAVs operating in GPS-denied environments. The proposed system integrates monocular-based SLAM and high-level control strategies, enabling autonomous navigation, real-time mapping, and robust localization. The experimental results demonstrate the system’s effectiveness in allowing UAVs to autonomously explore, return to a home position, and maintain consistent mapping in virtual GPS-denied scenarios. This work contributes a flexible architecture capable of addressing the challenges of autonomous UAV navigation and mapping, with potential for further development and real-world application.
In this contribution, we present the synchronization in dynamical complex networks with varying couplings. We identify two kinds of variations—(i) Non autonomous (Time-varying) couplings: where the coupling strength depends exclusively on time, (ii) Autonomous or Varying couplings (evolution) where the coupling strength depends on the behavior of the interconnected systems. The coupling strength in (i) is exogenous whereas in (ii) the coupling strength is endogenous and is defined by the states of the systems in the nodes. The exponential stability of the synchronization is ensured for the non autonomous couplings, due to the imposition of the coupling strength. Whereas, in the case of evolutionary couplings the exponential stability of the synchronization is not guaranteed for all time, due to the couplings are not controlled or imposed. We present an overview of these features in complex networks and illustrated by means of numerical examples.
This contribution presents new DC–DC Boost and Buck-Boost converter topologies to track sinusoidal signals in an exact form, that is, with zero error tracking. The proposed topology considers two DC–DC converters connected to the same load, which means that the converters are not in a cascade connection. To track the exact sinusoidal reference, the control algorithm is based on the indirect control algorithm and the harmonic balance method. The main contribution is to consider two control inputs that facilitate and permit canceling out the second harmonic generated by the nonlinearity of the model, and as a result there is a single frequency in the output. The result is such that the converters can track sinusoidal signals with exactly zero error. With this, there is a reduction in the potential negative effects on systems and equipment; some numerical results are presented to corroborate the proposal.
7 July 2026 in International Journal of Control, Automation, and Systems
In this contribution a new configuration of a DC-DC Boost and Buck-Boost converters is proposed to track sinusoidal signals exactly, with zero tracking error. The stage is conformed by two DC-DC converters connected to the same load, this is, they are not connected in cascade. To track exactly the sinusoidal reference the control scheme is base on the indirect control algorithm and the harmonic balance method. The proposed algorithm considers a second control input with the end of cancel out the second harmonic, this second harmonic is produced by the non linearity of the model and must be cancelled since there must be a single frequency in the output. The result is such that the converters can track sinusoidal signals with exactly zero error, some numerical results are presented to corroborate the proposal.