The synchronous reluctance motor (SynRM) is a high efficiency and low cost motor with rugged structure. However, the nonlinear and time-varying control characteristics of the SynRM with high torque ripple confine the high-performance applications of this motor. Therefore, an intelligent backstepping control using recurrent feature selection fuzzy neural network (IBSCRFSFNN) is proposed in this study to construct a high-performance SynRM position servo drive system. Firstly, the dynamic model of a vector control SynRM position servo drive is described. Secondly, a backstepping control (BSC) system is designed for the tracking of the position reference. Since the lumped uncertainty of the SynRM position servo drive system is unavailable to obtain in advance, it is very difficult to design an effective BSC in practical applications. Moreover, the sign function in BSC will cause undesired chattering phenomenon which will excite unknown dynamics and wear the ball bearing of the SynRM. To alleviate the existed difficulties in the BSC, the recurrent feature selection fuzzy neural network (RFSFNN) is proposed in this study to approximate an idea BSC. In addition, to compensate the possible approximated error of the RFSFNN, an improved adaptive compensator is augmented. The online learning algorithms of the RFSFNN are derived by using the Lyapunov stability method to assure asymptotical stability. Finally, the proposed control system is implemented in a 32-bit floating-point digital signal processor (DSP). The effectiveness and robustness of the proposed intelligent backstepping control system are verified by some experimental results.
20 November 2019 in IEEE Transactions on Power Electronics
The design and analysis of a novel current angle-based adaptive backstepping (ABS) speed control system for a synchronous reluctance motor (SynRM) drive system is presented in this study. First, a proportional-integral (PI) control system with field-oriented control (FOC) is described. Owing to the unmodeled dynamics and magnetic saturation effects of the SynRM, currently there is no predominant way to design the command of d-axis current for the SynRM. Therefore, an ABS based on current angle control (ABS-CAC) system is designed for the speed tracking of SynRM. The ABS speed tracking control is proposed to generate the stator current command, and a lookup table (LUT) of the results of maximum torque per ampere (MTPA) analysis by using the finite element analysis (FEA) method is proposed to provide the current angle commands. Moreover, to improve the transient dynamic response of SynRM under MTPA operating conditions, an intelligent speed transient control (ISTC) system using a recurrent Hermite fuzzy neural network (RHFNN) is developed to generate the compensated current angle command. The proposed intelligent ABS-CAC is implemented in a 32-bit floating-point digital signal processor (DSP) TMS320F28075. Finally, some experimental results are provided to demonstrate the robustness and effectiveness of the proposed control system.
14 August 2020 in IEEE Transactions on Power Electronics
To develop a high-performance synchronous reluctance motor (SynRM) drive system, a novel maximum power factor control (MPFC) using a current angle controller with stator resistance and stator flux estimators is proposed. Firstly, a traditional maximum power factor control (TMPFC) system using a saliency ratio of SynRM to generate a fixed current angle command is described. Since the saliency ratio requires offline pre-preparation and can't be adjusted automatically, it is difficult to improve the performance of MPFC in different operating regions because of the increasing of manufacturing cost and time-consuming. Therefore, an intelligent-maximum power factor searching control (MPFSC) using a recurrent Chebyshev fuzzy neural network (RCFNN) current angle controller is developed. To search the online optimal power factor (PF) points of the SynRM under different operating conditions, the RCFNN current angle controller is designed to produce compensated current angle commands. Moreover, a proportional-integral speed controller is adopted to generate the stator current magnitude command, and the proposed intelligent-MPFSC is employed to generate the current angle command. Furthermore, the proposed intelligent-MPFSC system is implemented in a digital signal processor. Finally, the current angle commands of the optimal PF can be effectively obtained online at different speed operating commands with varied load torque.
21 March 2019 in IEEE Transactions on Power Electronics
In order to construct a high-performance synchronous reluctance motor (SynRM) drive system, an intelligent maximum torque per ampere (MTPA) tracking control using a recurrent Legendre fuzzy neural network (RLFNN) is proposed in this study. First, a traditional MTPA (TMTPA) control system based on fieldoriented control (FOC) is introduced. Since the reluctance torque of the SynRM is highly nonlinear and time-varying, the MTPA tracking control is very difficult to achieve by using the TMTPA control in practical applications. Then, an adaptive computed current (ACC) speed control using the proposed RLFNN for the MTPA tracking control of a SynRM drive system, which does not use a lookup table and can effectively obtain the optimal current angle command of MTPA online, is described in detail. The ACC speed control is applied to generate the stator current magnitude command, and an adaptation law is proposed to online adapt the value of a lumped uncertainty in the ACC control. Moreover, the adaptation law is derived using the Lyapunov stability theorem to guarantee the asymptotic stability of the ACC speed control. Furthermore, the proposed RLFNN is employed to produce the incremental command of the current angle. In addition, the ACC speed control and RLFNN are implemented in a TMS320F28075 32-bit floating-point digital signal processor (DSP) for a 4 kW SynRM drive system. Finally, the robustness and effectiveness of the proposed intelligent MTPA tracking control are verified by some experimental results.
9 January 2020 in IEEE Transactions on Industrial Informatics
A real-time moment of inertia identification technique using Petri probabilistic fuzzy neural network with an asymmetric membership function (PPFNN-AMF) for an interior permanent magnet synchronous motor (IPMSM) servo drive is proposed in this study. The estimated moment of inertia will be used in the online design of an integral-proportional (IP) speed controller to achieve the gains auto-tuning of the IPMSM servo drive. In the proposed method, the dynamic analysis of a field-oriented control (FOC) IPMSM servo drive system with an IP speed controller is constructed first. Then, a heuristic approach using the PPFNN-AMF is proposed for the real-time identification of the moment of inertia of the IPMSM servo drive system. Moreover, the network structure and the convergence analysis of the PPFNN-AMF are devised and derivated. Furthermore, an IPMSM servo drive based on a high performance digital signal processor (DSP) is developed. Finally, from the experimental results, the gains of the IP speed controller can be tuned online effectively at different operating conditions with robust control characteristics.
14 January 2021 in IEEE Transactions on Industrial Electronics
In order to design a high-performance synchronous reluctance motor (SynRM) drive system, a novel adaptive complementary sliding mode (ACSM) speed control and an effective d -axis current control (EDCC) are proposed in this article. First, a classical proportional-integral based field-oriented control of the SynRM drive with a constant d -axis current command is introduced. However, the constant d -axis current command is obtained by trial and error method or satisfying the minimum excitation current of the SynRM. More importantly, the constant value of the d -axis current command is not suitable for the highly nonlinear and time-varying SynRM drive at the varied load torque conditions. Therefore, an ACSM speed control with the d -axis current control (ACSMSC-DCC) system is designed for the speed regulation of the SynRM. The ACSM speed control is proposed to generate the q -axis current commands, and an EDCC by using the stator flux estimator is proposed to produce the d -axis current commands. Finally, the proposed ACSMSC-DCC system is implemented in a 32-bit floating-point digital signal processor TMS320F28075 and its effectiveness are verified by some experimental results.