A real-time moment of inertia identification technique using Petri probabilistic fuzzy neural network with an asymmetric membership function (PPFNN-AMF) for an interior permanent magnet synchronous motor (IPMSM) servo drive is proposed in this study. The estimated moment of inertia will be used in the online design of an integral-proportional (IP) speed controller to achieve the gains auto-tuning of the IPMSM servo drive. In the proposed method, the dynamic analysis of a field-oriented control (FOC) IPMSM servo drive system with an IP speed controller is constructed first. Then, a heuristic approach using the PPFNN-AMF is proposed for the real-time identification of the moment of inertia of the IPMSM servo drive system. Moreover, the network structure and the convergence analysis of the PPFNN-AMF are devised and derivated. Furthermore, an IPMSM servo drive based on a high performance digital signal processor (DSP) is developed. Finally, from the experimental results, the gains of the IP speed controller can be tuned online effectively at different operating conditions with robust control characteristics.
An interior permanent magnet synchronous motor (IPMSM) drive system with machine learning-based maximum torque per ampere (MTPA) as well as flux-weakening (FW) control was developed and is presented in this study. Since the control performance of IPMSM varies significantly due to the temperature variation and magnetic saturation, a machine learning-based MTPA control using a Petri probabilistic fuzzy neural network with an asymmetric membership function (PPFNN-AMF) was developed. First, the d-axis current command, which can achieve the MTPA control of the IPMSM, is derived. Then, the difference value of the dq-axis inductance of the IPMSM is obtained by the PPFNN-AMF and substituted into the d-axis current command of the MTPA to alleviate the saturation effect in the constant torque region. Moreover, a voltage control loop, which can limit the inverter output voltage to the maximum output voltage of the inverter at high-speed, is designed for the FW control in the constant power region. In addition, an adaptive complementary sliding mode (ACSM) speed controller is developed to improve the transient response of the speed control. Finally, some experimental results are given to demonstrate the validity of the proposed high-performance control strategies.