Hengjun Li

Hengjun Li


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 April 2023 in Minerals
Verified
Journal Article
Open access
PDF file
SMShaojian Ma
Shaojian Ma
HLHengjun Li
Hengjun Li
XYXiaojing Yang
Xiaojing Yang
WXWenzhe Xu
Wenzhe Xu
XDXingjian Deng
Xingjian Deng
JYJinlin Yang
Jinlin Yang
The degree of difficulty in crushing an ore depends on the composition of the ore itself. Due to different types and compositions of ores, the crushing mechanism of ores during the crushing process is also different. In order to quantitatively analyze the impact crushing characteristics of mineral components in ores, this paper takes pure mineral quartz, pyrrhotite, and pyrite as the research objects and uses the universal drop weight impact crushing test equipment and standard test methods developed by the JK Mineral Research Center of the University of Queensland, Australia, to conduct JK drop weight tests on these three pure mineral samples. The results show that the particle size distribution of impact crushing products is wide, covering all particle sizes from “0” to close to the feed particle size, and the yield distribution of each product particle size is relatively uniform. There are critical values and “energy barrier” effects for the impact-specific crushing energy. The impact-specific crushing energy has a significant impact on the particle size composition and crushing effect of the crushing product, and there is an interactive effect between the impact-specific crushing energy and the feed particle size and mineral type. The impact crushing resistance of the sample can be characterized by using Mohs hardness, impact crushing characteristic parameters, impact crushing resistance level, and the yield limit value t10 of the characteristic crushing particle size. The overall characterization results have good consistency.

15 May 2023 in Minerals
Verified
Journal Article
Open access
PDF file
JYJinlin Yang
Jinlin Yang
PZPengyan Zhu
Pengyan Zhu
HLHengjun Li
Hengjun Li
ZLZongyu Li
Zongyu Li
XHXingnan Huo
Xingnan Huo
SMShaojian Ma
Shaojian Ma
Based on the JK Drop Weight test and principle of selective crushing, a multicomponent complex ore with its component minerals, i.e., pyrrhotite, sphalerite, and quartz, was used to explore the impact crushing characteristics and relationship between the complex ore and its component minerals. Results show that the order of impact crushing resistance is quartz > pyrrhotite > ore > sphalerite. The particle-size-distribution characteristic curve of ore crushing products is always “sandwiched” between the curves of pyrrhotite, sphalerite, and quartz within the same feed-size range. When the particle size is −63 + 53, −45 + 37.5, −31.5 + 26.5, and −22.4 + 19 mm, the component mineral pyrrhotite has a negative effect on the impact crushing of ore, while the component mineral sphalerite has a positive effect. When the particle size is −16 + 13.2 mm, the component mineral pyrrhotite has a positive effect on the crushing effect of the ore, while the component mineral sphalerite has a negative effect. The component mineral quartz always has a negative effect on the impact crushing effect of ore in all the studied particle sizes.

24 May 2023 in Processes
Verified
Journal Article
Open access
PDF file
JYJinlin Yang
Jinlin Yang
XHXingnan Huo
Xingnan Huo
ZLZongyu Li
Zongyu Li
HLHengjun Li
Hengjun Li
TWTeng Wang
Teng Wang
SMShaojian Ma
Shaojian Ma
In this study, methyl orange, methylene blue, and amido black 10B were removed as target dyes using purified, synthetic, and purchased zinc ferrite as adsorbents and photocatalysts. The highest removal rates of amido black 10B by these adsorbents ranged from 81.62% to 88.33%. The removal rate of methyl orange was approximately 1%, and the removal rate of methylene blue was approximately 2%. Hence, an investigation was conducted to elucidate the factors that influence the removal efficacy of purified zinc ferrite on amido black 10B. Titanium dioxide prepared at different calcination temperatures was unsuccessful in removing amido black 10B, but the physical mixing of titanium dioxide prepared at suitable calcination temperatures with purified zinc ferrite had a positive effect on amido black 10B removal. Since zinc ferrite could not be used as an adsorbent to remove methyl orange and methylene blue, the photocatalytic degradation properties of zinc ferrite and its influencing factors were studied. The optimal conditions for the photocatalytic degradation of methylene blue and methyl orange by zinc ferrite are as follows: a zinc ferrite catalyst dosage of 0.15 g, an initial solution concentration of 20 mg/L, and a pH of 6.0. The dosage of the zinc ferrite/titanium dioxide composite catalyst is 0.15 g, the initial solution concentration is 20 mg/L, and the pH is 6.5.

8 June 2023 in Minerals
Verified
Journal Article
Open access
PDF file
SMShaojian Ma
Shaojian Ma
XYXiaojing Yang
Xiaojing Yang
HLHengjun Li
Hengjun Li
WXWenzhe Xu
Wenzhe Xu
XDXingjian Deng
Xingjian Deng
JYJinlin Yang
Jinlin Yang
In order to explore the crushing mechanism of minerals, this paper attempts to eliminate the throwing effect of media and study the grinding characteristics of minerals only under the action of abrasion force. In this paper, the method of removing the throwing state of media is to adjust the mill to a lower rotational speed, so that the grinding media are all in a cascading state. Three single-component pure minerals, quartz, pyrrhotite, and pyrite, commonly found in complex ores, were selected as research objects to study the grinding behavior characteristics of the three minerals only under the force of abrasion. The effects of mineral species, feed-particle sizes, grinding time, and other factors on the particle-size distribution and product-generation rate of grinding products are studied. The results show that from the particle-size distribution of grinding products, the yield of coarse particles is the highest, while the yield and t10 value of other fine particles are very low. The feed-particle size and the hardness of the mineral sample affect the grinding behavior. The product particle size is mainly 0.71 times the feed-particle size, and the other fine particle sizes generated are less than 0.5 times the feed-particle size.

20 July 2023 in Processes
Verified
Journal Article
Open access
PDF file
JYJinlin Yang
Jinlin Yang
XHXingnan Huo
Xingnan Huo
HXHanxin Xiao
Hanxin Xiao
ZLZongyu Li
Zongyu Li
HLHengjun Li
Hengjun Li
SMShaojian Ma
Shaojian Ma
This study focuses on the comprehensive recycling and utilization of zinc ferrite, a by-product of wet zinc refining, for the treatment of azo dye wastewater. It explores the adsorption performance of various materials on Amido Black 10B and analyzes the factors that influence the adsorption process. Zinc ferrite derived from the by-products of wet zinc refining, zinc ferrite synthesized via calcination, and titanium dioxide prepared using the sol–gel method are utilized as adsorbents, specifically targeting Amido Black 10B. By adjusting factors such as calcination temperature, mixing ratio, initial pH, adsorbent dosage, adsorption time, initial concentration, and reaction temperature, the effects on the adsorption of Amido Black 10B are studied. Additionally, the performance of composite materials consisting of different crystalline forms of titanium dioxide and purified zinc ferrite is examined. Furthermore, the adsorption process of Amido Black 10B by purified zinc ferrite/titanium dioxide is analyzed in terms of kinetics and thermodynamics. The results show that titanium dioxide and purified zinc ferrite, prepared at temperatures of 300 °C to 550 °C, achieve over 90% removal efficiency when co-adsorbing Amido Black 10B. The best performance is observed at a ratio of 4:6 for purified zinc ferrite to titanium dioxide, with removal efficiency exceeding 80%. The second-order kinetic model fits the adsorption data well, and higher initial solution concentrations lead to decreased adsorption rates. The adsorption process of purified zinc ferrite/titanium dioxide on Amido Black 10B is spontaneous, exothermic, and reduces system disorder. Higher temperatures negatively impact the adsorption process.

24 June 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SMShaojian Ma
Shaojian Ma
XYXiaojing Yang
Xiaojing Yang
HLHengjun Li
Hengjun Li
ZLZongyu Li
Zongyu Li
PZPengyan Zhu
Pengyan Zhu
JYJinlin Yang
Jinlin Yang
During the grinding process, the crushing of minerals mainly depends on the impact action of the grinding medium. Based on the JK drop weight test data of quartz and pyrrhotite and the research results of their impact crushing characteristic parameters, this paper calculates the specific crushing energy (Ecs) of mineral samples subjected to impact in a ball mill using the grinding medium motion theory and then calculates the cumulative particle size distribution under screening under any mesh size using the JK drop weight test method. On this basis, the breakage distribution function of mineral samples is calculated, and a selection function is obtained based on grinding experiments. Finally, using Matlab programming and function-fitting mathematical methods, as well as a particle size population balance dynamics simulation of grinding, the particle size distribution characteristics of the grinding products of the two mineral samples in the mill that are only subjected to impact action are calculated. The results show that the selection function of quartz and pyrrhotite decreases overall with the prolongation of the grinding time, and the selection function of the coarse particle size changes more significantly than that of the fine particle size. At the same time, the selection function decreases with the decrease in feed particle size, and the smaller the feed particle size, the lower the probability of impact crushing. The Ecs values of quartz and pyrrhotite at each particle level in the mill are different, and the degree of mineral crushing is closely related to the impact energy, feed particle size, and mineral properties.