Tropical forests are a key component of the global carbon cycle. Yet, there are still high uncertainties in forest carbon stock and flux estimates, notably because of their spatial and temporal variability across the tropics. Several upcoming spaceborne missions have been designed to address this gap. High-quality ground data are essential for accurate calibration/validation so that spaceborne biomass missions can reach their full potential in reducing uncertainties regarding forest carbon stocks and fluxes. The BIOMASS mission, a P-band SAR satellite from the European Space Agency (ESA), aims at improving carbon stock mapping and reducing uncertainty in the carbon fluxes from deforestation, forest degradation, and regrowth. In situ activities in support of the BIOMASS mission were carried out in French Guiana and Gabon during the TropiSAR and AfriSAR campaigns. During these campaigns, airborne P-band SAR, forest inventory, and lidar data were collected over six study sites. This paper describes the methods used for forest inventory and lidar data collection and analysis, and presents resulting plot estimates and aboveground biomass maps. These reference datasets along with intermediate products (e.g., canopy height models) can be accessed through ESA's Forest Observation System and the Dryad data repository and will be useful for BIOMASS but also to other spaceborne biomass missions such as GEDI, NISAR, and Tandem-L for calibration/validation purposes. During data quality control and analysis, prospects for reducing uncertainties have been identified, and this paper finishes with a series of recommendations for future tropical forest field campaigns to better serve the remote sensing community.

The second-generation exploitation of meteorological satellite polar system (EPS-SG) C-band-wavelength scatterometer instrument (called SCA), planned for launch in 2022, has a direct heritage from the successful advanced scatterometer (ASCAT) flown on the current EPS satellites. In addition, SCA will represent three major innovations with respect to ASCAT, namely: 1) Cross polarization and horizontal copolarization; 2) a nominal spatial resolution of 25 km; and 3) 20% greater spatial coverage than ASCAT. The associated expected science and application benefits that led the SCA design are discussed with respect to ocean, land, and sea ice applications for near-real time, climate monitoring, and research purposes. Moreover, an option to implement an ocean Doppler capability to retrieve the ocean motion vector is briefly discussed as well. In conclusion, the SCA instrument innovations are well set to provide timely benefits in all the main application areas of the scatterometer (winds, soil moisture, sea ice) and can be expected to contribute to new and more sophisticated meteorological, oceanographic, land, sea ice, and climate services in the forthcoming SCA era.

The Kuiseb River is one of the major ephemeral rivers of Western Namibia, setting the northern limit of the Namib Sand Sea and outflowing in the Atlantic Ocean at Walvis Bay. Such ephemeral rivers are of the highest importance for the country since they are related both to recent past climatic conditions and to potential water resources. Using high-resolution radar images from the Japanese ALOS-2 satellite, we mapped for the first time the numerous channels hidden under the surface aeolian sediments: while the non-permanent tributaries of the Kuiseb River appear north of its present-day bed, a wide paleochannel system running westward, assumed by previous studies, could be clearly observed in the interdune valleys in the south. Radar-detected channels were studied during fieldwork in May 2019, which produced both subsurface ground-penetrating radar profiles and high-resolution drone-generated digital elevation models. It allowed us to confirm the existence of the “Paleo–Kuiseb” drainage system, a remnant of the Holocene history of the Kuiseb River, moving northward under the progression of the Namib Sand Sea. Our observations also contribute to the explanation of the young age of the linear dunes at the northern edge of the Namib Sand Sea, which are currently active and are pushing the Kuiseb River course toward the north.

A new processing technique, i.e., ground cancellation, which removes the ground signal from a pair of interferometric synthetic aperture radar (SAR) images, is used to emphasize the response from above-ground targets. This technique is of particular interest when studying forest canopies using low-frequency signals able to reach the underlying ground, in which case the portion of the signal coming from the ground interferes with the recovery of information about the vegetation. We demonstrate that the power in ground-canceled P-band HV SAR data gives significantly higher correlations with above-ground biomass (AGB) than the interferometric images considered separately. In addition, a significant increase in the sensitivity of backscatter to AGB is observed. Ground-canceled power may then be modeled or regressed to estimate AGB; these possibilities are not discussed here as they will be the topic of forthcoming publications. The effectiveness of this technique is proven through simulations and analysis of real data gathered on tropical forests. The stability of the technique is analyzed under the digital terrain model and baseline control errors, and compensation strategies for these errors are presented.

This paper presents an analysis of a logarithmic relationship between P -band cross-polarized backscatter from synthetic aperture radar (SAR) and aboveground biomass (AGB) across different forest types based on multiple airborne datasets. It is found that the logarithmic function provides a statistically significant fit to the observed relationship between HV backscatter and AGB. While the coefficient of determination varies between datasets, the slopes, and intercepts of many of the models are not significantly different, especially when similar AGB ranges are assessed. Pooled boreal and pooled tropical data have slopes that are not significantly different, but they have different intercepts. Using the power law formulation of the logarithmic relation allows estimation of both the equivalent number of looks (ENL) needed to retrieve AGB with a given uncertainty and the sensitivity of the AGB inversion. The campaign data indicates that boreal forests require a larger ENL than tropical forests to achieve a specified relative accuracy. The ENL can be increased by multichannel filtering, but ascending and descending images will need to be combined to meet the performance requirements of the BIOMASS mission. The analysis also indicates that the relative change in AGB associated with a given backscatter change depends only on the magnitude of the change and the exponent of the power law, and further implies that to achieve a relative AGB accuracy of 20% or better, residual errors from radiometric distortions produced by the system and environmental effects must not exceed 0.43 dB in tropical and 0.39 dB in boreal forests.

BIOMASS is ESA’s seventh Earth Explorer mission, scheduled for launch in 2022. The satellite will be the first P-band SAR sensor in space and will be operated in fully polarimetric interferometric and tomographic modes. The mission aim is to map forest above-ground biomass (AGB), forest height (FH) and severe forest disturbance (FD) globally with a particular focus on tropical forests. This paper presents the algorithms developed to estimate these biophysical parameters from the BIOMASS level 1 SAR measurements and their implementation in the BIOMASS level 2 prototype processor with a focus on the AGB product. The AGB product retrieval uses a physically-based inversion model, using ground-canceled level 1 data as input. The FH product retrieval applies a classical PolInSAR inversion, based on the Random Volume over Ground Model (RVOG). The FD product will provide an indication of where significant changes occurred within the forest, based on the statistical properties of SAR data. We test the AGB retrieval using modified airborne P-Band data from the AfriSAR and TropiSAR campaigns together with reference data from LiDAR-based AGB maps and plot-based ground measurements. For AGB estimation based on data from a single heading, comparison with reference data yields relative Root Mean Square Difference (RMSD) values mostly between 20% and 30%. Combining different headings in the estimation process significantly improves the AGB retrieval to slightly less than 20%. The experimental results indicate that the implemented retrieval scheme provides robust results that are within mission requirements.