Ting Liu

Dr. Ting Liu


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 September 2025 in Advanced Science
Verified
Journal Article
Open access
YDYinxia Du
Yinxia Du
WCWangfei Che
Wangfei Che
YSYunfei Shi
Yunfei Shi
JLJuanjuan Lu
Juanjuan Lu
XZXiaodong Zhou
Xiaodong Zhou
JLJunjie li
Junjie li
Birefringent crystals are pivotal for modern optical modulation technologies, yet developing high‐performance birefringent materials with large birefringence (Δ n ), wide bandgaps, and scalable synthesis remains a significant challenge. Different from the traditional planar [MQ 3 ] and distorted [MQ n ] (n ≥ 4) polyhedral units, a “linear‐group” design strategy is proposed, targeting heavy‐metal halides with [HgX 2 ] (X = halides) coordination modes to exploit their inherent polarizability anisotropy. Through systematic experimental investigations in the ternary A‐Hg‐X (A = Rb, Cs; X = Br, I) system, six novel Hg‐based halides were synthesized. Notably, RbHg 5 Br 11 with linear [HgBr 2 ] units demonstrates excellent optical properties, including a wide bandgap (3.73 eV) and large Δ n ( cal. ) (0.35@546 nm). Importantly, the compound displays a good crystal growth habit, and the high‐quality RbHg 5 Br 11 single crystal can be grown by the simple solution method. Theoretical calculations reveal that the strong optical anisotropy arises from the aligned [HgBr 2 ] linear units. The results demonstrate that RbHg 5 Br 11 is a promising birefringent material and give some new insights for designing high‐performance optical materials based on the linear units with high polarizability anisotropy.

10 September 2025 in Buildings
Verified
Journal Article
Open access
PDF file
YSYi Si
Yi Si
HWHong Wu
Hong Wu
RLRuntao La
Runtao La
BYBo Yang
Bo Yang
TLTing Liu
Ting Liu
MLMeng Li
Meng Li
This study advances alkali-activated cementitious materials (AACMs) by developing a ground-granulated blast furnace slag/high-calcium fly ash (GGBS/HCFA) composite that incorporates Tuokexun desert sand and by establishing a clear linkage between activator chemistry, mix proportions, curing regimen, and microstructural mechanisms. The innovation lies in valorizing industrial by-products and desert sand while systematically optimizing the aqueous glass modulus, alkali equivalent, HCFA dosage, and curing temperature/time, and coupling mechanical testing with XRD/FTIR/SEM to reveal performance–structure relationships under thermal and chemical attacks. The optimized binder (aqueous glass modulus 1.2, alkali equivalent 6%, and HCFA 20%) achieved 28-day compressive and flexural strengths of 52.8 MPa and 9.5 MPa, respectively; increasing HCFA beyond 20% reduced compressive strength, while flexural strength peaked at 20%. The preferred curing condition was 70 °C for 12 h. Characterization showed C-(A)-S-H as the dominant gel; elevated temperature led to its decomposition, acid exposure produced abundant CaSO4, and NaOH exposure formed N-A-S-H, each correlating with strength loss. Quantitatively, acid resistance was weaker than alkali resistance and both deteriorated with concentration: in H2SO4, 28-day mass loss rose from 1.22% to 4.16%, with compressive/flexural strength retention dropping to 75.2%, 71.2%, 63.4%, and 57.4% and 65.3%, 61.6%, 58.9%, and 49.5%, respectively; in NaOH (0.2/0.5/0.8/1.0 mol/L), 28-day mass change was +0.74%, +0.88%, −1.85%, and −2.06%, compressive strength declined in all cases (smallest drop 7.77% at 0.2 mol/L), and flexural strength increased at lower alkalinity, consistent with a pore-filling micro-densification effect before gel dissolution/cracking dominates. Practically, the recommended mix and curing window deliver structural-grade performance while improving high-temperature and acid/alkali resistance relative to non-optimized formulations, offering a scalable, lower-carbon route to utilize regional desert sand and industrial wastes in durable cementitious applications.

29 September 2023 in Frontiers in Chemistry
Verified
Journal Article
Open access
TLTing Liu
Ting Liu
GYGuanghua Yang
Guanghua Yang
JMJuan Ma
Juan Ma
HZHuimin Zhang
Huimin Zhang
MZMin Zhang
Min Zhang
ACAimin Chang
Aimin Chang
The development of negative temperature coefficient (NTC) thermistor materials with a wide range of operating temperatures, high resistance (R), low thermal content (B) and good stability is significant for improving the overall performance of NTC thermistors. Traditional NTC thermistors materials are of the spinel, however, their practical applications are commonly limited to temperatures below approximately 200°C.In this study, it was found that a novel perovskite-structured solid solution (1-x)Bi0.2Sr0.5La0.3TiO3-xLaMnO3 (0.05 ≤ × ≤ 0.2) (BSLT-LM) showed good NTC performance from room temperature to high temperature (600°C) due to the stable structure at high temperatures. The ρ25, ρ100, ρ600 and B25/100, B25/600 constants of Bi0.2Sr0.5La0.3TiO3-0.1LaMnO3 NTC thermistors are approximately 1.76 × 108 Ω cm, 1.13 × 107 Ω cm, 9.89 × 102 Ω cm, 4063.91 K, 5472.34 K, respectively. The electrical conductivity of these solid solution refers to the electronic transition between Mn3+ and Mn4+, and oxygen vacancies. These results demonstrate the tremendous potential of perovskite-structured (1-x) Bi0.3Sr0.5La0.2TiO3-xLaMnO3 thermistor ceramics with NTC performance.

23 December 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
HWHong Wu
Hong Wu
YHYong Huang
Yong Huang
SLShisong Liu
Shisong Liu
YLYubin Liu
Yubin Liu
TLTing Liu
Ting Liu
SLSining Li
Sining Li
To promote the sustainable utilization of desert sand as a regional resource in the infrastructure construction of saline-alkali areas, this paper proposes an accelerated test method based on the coupling of an external electric field (60 V) and a 2% Na2SO4 solution for rapid evaluation of its sulfate erosion resistance. The optimal mix proportion (FA 10%, water-to-binder ratio 0.33, cement-to-sand ratio 1:1.5, SF 10%) was determined through orthogonal experiments. By employing multi-scale analytical techniques including electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), X-ray diffraction (XRD) and thermal analysis (TG-DTG), the differentiated deterioration mechanisms driven by the electric field were systematically revealed. The results show that the charge-transfer resistance (Rct) decreased by about 95% within 28 d, demonstrating the characteristic of “micro-scale deterioration preceding macro-scale strength loss.” The anode region was dominated by dissolution of hydration products (porosity 5.1%), while the cathode region, due to enrichment of sulfate ions (S content 3.37 wt.%), generated a large amount of expansive products, leading to more pronounced structural damage (porosity 8.3%) and greater mass loss (cathode 12.56% > anode 9.85%). This study not only elucidates the deterioration mechanisms of desert sand concrete under coupled environmental action, but also provides a mechanism-explicit, rapid and efficient laboratory evaluation method for its sulfate resistance, offering practical guidance for durability design and prevention in engineering structures exposed to saline-alkali conditions.

12 February 2026 in Buildings
Verified
Journal Article
Open access
PDF file
BZBaoxi Zuo
Baoxi Zuo
YHYong Huang
Yong Huang
YLYubin Liu
Yubin Liu
XYXue Yuan
Xue Yuan
LJLiran Jiao
Liran Jiao
TLTing Liu
Ting Liu
To address the issues of lengthy test cycles and singular evaluation methods for the durability of cement-based materials in sulfate environments, this study conducted accelerated sulfate erosion experiments on 3D-printed cement-based materials incorporating various supplementary cementitious materials, such as fly ash (FA), silica fume (SF), and metakaolin (MK), by applying a controlled external electric field. Electrochemical impedance spectroscopy (EIS) was employed to characterize the extent of material degradation. By regulating electric field intensity and sulfate solution conditions, and integrating multiple analytical techniques including electrochemical impedance spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TG), this research revealed that the applied electric field accelerates both cement hydration and sulfate-induced degradation through enhanced ion migration. Furthermore, the impedance response characterized by electrochemical impedance spectroscopy showed a positive correlation with macroscopic mechanical properties. Comparative evaluation of sulfate resistance among cement composite systems, FA–cement composites, SF–cement composites, and MK-cement composites indicated that cement-based material with 10% FA addition exhibited the strongest corrosion resistance. This study analyzes the changes in electrochemical impedance spectroscopy characteristic parameters before and after the application of an electric field, systematically elucidating the evolution of the material’s microstructure and the patterns of durability degradation. It provides key mechanisms for understanding the durability evolution of cement-based materials exposed to sulfate environments under electric-field assistance, and lays both experimental and theoretical foundations for developing methods to enhance durability.

6 February 2024 in Molecules
Verified
Journal Article
Open access
PDF file
TLTing Liu
Ting Liu
YMYanxi Ma
Yanxi Ma
YTYakun Tang
Yakun Tang
YZYue Zhang
Yue Zhang
JLJingmei Liu
Jingmei Liu
LLLang Liu
Lang Liu
The conversion of lignite into aromatic compounds by highly active catalysts is a key strategy for lignite valorization. In this study, Ni/NiO@NC nanocomposites with a high specific surface area and a vesicular structure were successfully prepared via a facile sol–gel method. The Ni/NiO@NC catalysts exhibited excellent catalytic activity for the catalytic hydroconversion (CHC) of benzyloxybenzene (as lignite-related modeling compounds) under mild conditions (120 °C, 1.5 MPa H2, 60 min). The possible mechanism of the catalytic reaction was investigated by analyzing the type and content of CHC reaction products at different temperatures, pressures, and times. More importantly, the magnetic catalyst could be conveniently separated by a magnet after the reaction, and it maintained high catalytic efficiency after six reuses. This study provides an efficient and recyclable catalyst for the cleavage of >CH–O bonds in lignite, thereby offering another way for improved utilization of lignite.