Green synthesis differs in the way that the plant produces chemicals that act as reducing and stabilizing agents, and by adopting this green synthesis, we have synthesized silver nanoparticles (AgNPs) from the leaf and fruit extracts of Annona squamosa (also known as Sharifa), where these extracts have played an important role as reducing and capping agents. The nanoparticles were synthesized as the consequence of a reduction that happened between plant extracts and the precursor solution. The prepared AgNPs were then characterized using scanning electron microscopy, UV-Visible spectroscopy, and X-ray diffraction to study their morphology, optical response, and crystallinity. A single distinctive absorption peak of colloidal AgNPs samples was observed at 430 nm and 410 nm for leaf and fruit extract samples, having an optical bandgap of 2.97 eV and 2.88 eV, respectively, with a spherical shape having a diameter in the range of 35–90 nm and 15–50 nm, respectively, whilst XRD studies supported the FCC cubic structure of the mediated AgNPs. These green synthesized AgNPs have a wide variety of uses, particularly in the biomedical domain, where they have the potential to treat numerous diseases and are reported to be efficient against antibacterial, anti-cancer, and anti-diabetic activities.

The current research focuses on the development of Ag–ZnO heterostructures through a “bottom-up” approach involving the assembly and extraction of Aloe barbadensis Miller gel. These heterostructures composed of metals/semiconductor oxide display distinct and notable optical, electrical, magnetic, and chemical properties that are not found in single constituents and also exhibit photocatalytic applications. These synthesized heterostructures were characterized by XRD, FTIR, SEM, and UV–visible spectroscopy. The high peak intensity of the Ag/ZnO composite shows the high crystallinity. The presence of Ag–O, Zn–O, and O–H bonding is verified using FTIR analysis. SEM analysis indicated the formation of spherical shapes of Ag/ZnO heterostructures. The Zn, O, and Ag elements are further confirmed by EDX analysis. Ag–ZnO heterostructures exhibited excellent photocatalytic activity and stability against the degradation of tubantin red 8BL dye under visible light irradiation.

In this study, novel hydrothermal ex situ synthesis was adopted to synthesize MoS₂/WO₃ heterostructures using two different molar ratios of 1:1 and 1:4. The “bottom-up” assembly was successfully developed to synthesize spherical and flaky-shaped heterostructures. Their structural, morphological, compositional, and bandgap characterizations were investigated through XRD, EDX, SEM, UV-Visible spectroscopy, and FTIR analysis. These analyses help to understand the agglomerated heterostructures of MoS₂/WO₃ for their possible photocatalytic application. Therefore, prepared heterostructures were tested for RhB photodegradation using solar light irradiation. The % efficiency of MoS₂/WO₃ composites for 30 min irradiation of 1:1 was 91.41% and for 1:4 was 98.16%. Similarly, the % efficiency of 1:1 MoS₂/WO₃ heterostructures for 60 min exposure was 92.68%; for 1:4, it was observed as 98.56%; and for 90 min exposure, the % efficiency of 1:1 was 92.41%, and 98.48% was calculated for 1:4 composites. The photocatalytic efficiency was further verified by reusability experiments (three cycles), and the characterization results afterward indicated the ensemble of crystalline planes that were responsible for the high efficiency. Moreover, these heterostructures showed stability over three cycles, indicating their future applications for other photocatalytic applications.

Manganese-doped bismuth ferrites were synthesized using the coprecipitation method with the green extract Azadirachta indica. Our incorporation of the transition element, manganese, into bismuth ferrites tackles the challenge of increased leakage current often observed in intrinsic bismuth ferrites. We gained key insights through a comprehensive examination of the structural, dielectric, and optical properties of these materials, utilizing Fourier transform infrared spectroscopy (FTIR), impedance spectroscopy, and UV-visible spectroscopy, respectively. The formation of an octahedral geometry was confirmed using the FTIR technique. UV-visible spectroscopy indicated that 2% Mn doping is optimal, while we obtained a low band gap energy (2.21 eV) and high refractive index (3.010) at this amount of doping. The manufactured materials exhibited the typical ferrite-like dielectric response, that is, the dielectric parameter gradually decreased as the frequency increased and then stayed constant in the high-frequency range. Using the diphenylpicrylhydrazyl (DPPH) free radical assay, we also examined the antioxidant activity of bismuth ferrites. We concluded that among different Mn-doped BiFeMnO₃-based nanomaterials, the 2 wt % Mn-doped BiFeMnO₃ shows the highest antioxidant activity. This finding substantiates the efficacy of the optimized material with regard to its potent antioxidant activity, positioning it as a promising candidate for potential biomedical applications.

Aluminum antimonide (AlSb), a semiconductor compound, finds its applications in optoelectronics because of its tunable bandgap and promising properties achieved by tailoring suitable dopants. To explore the effects of doping, thin films of pure AlSb and 10% magnesium (Mg)-doped aluminum antimonide (MgAlSb) were synthesized through compound solution deposition on a glass substrate using a low-cost chemical bath deposition (CBD) technique at varying bath temperatures with deposition time intervals ranging from 60 to 180 min. Optical microscopy was used to evaluate the surface roughness and morphology of the synthesized films, revealing the surface roughness and thin film uniformity at different deposition times. The structural characteristics of AlSb and Mg-doped AlSb thin films were further examined using the X-ray diffraction technique, which validated the formation of AlSb and Mg-doped AlSb thin films. This research enables large-scale low-temperature deposition for a variety of conceivable applications in the coatings, materials penetration, energy, and photonic sectors due to the novel properties of this material.

The current study focuses the nanocomposites of Ag/WO₃ was synthesized via hydrothermal method and extract of Aloe-vera gel was used. Various characterization techniques were used for the analysis of Ag/WO₃ nanocomposites which includes SEM (scanning electron microscope), EDX (Energy dispersive spectroscopy), XRD (X-ray diffraction), FTIR (Fourier transform infrared), UV (ultraviolet–visible-spectroscopy) to tell about elemental composition, shape and crystalline structure, band gap, functional group. The presence of composition of elements O, W, Ag in Ag/WO₃ nanocomposites was confirmed through EDX spectrum. The hexagonal crystal structure and the border peaks in Ag/WO₃ nanocomposites were examined through XRD spectra. The Anti-oxidant activity was synthesized by using (DPPH) free Radical in Ag/WO₃ nanocomposites. The outcomes of present study exhibited an excellent anti-oxidant activity and also indicated the reduction of stabilized free radical DPPH analysis using Aloe vera extract. The result revealed that the anti-oxidant activity of Ag/WO₃ nanocomposites is essential for biomedical application and various industries.