The increasing demand for energy and electricity and the depletion of fossil fuels are global problems. In recent years, dye-sensitized solar cell (DSSC) technologies have gained notoriety for their application in solar energy. DSSCs are considered a promising alternative renewable energy source to both inorganic and organic photovoltaic (PV) cells. Many types of dyes are being investigated to enhance the light-harvesting properties of DSSCs, but the actual realization of these absorbers in cell structure requires optimum parameters. The main aim of this study was to simulate proposed zinc phthalocyanine (ZnPC)-based structures to validate their design, assess their performance for commercial implementation, and optimize the cell parameters for optimum efficiency. To that end, Scaps-1D was employed to evaluate the performance of DSSCs to determine their optimum parameters. We found that ZnPC and isopropoxy ZnPC molecules outperform others molecules because of better optoelectronic properties. Several other parametric effects, such as photoactive layer thicknesses, doping densities, trap densities, and charge carrier mobilities, were also evaluated to observe their impact on device performance. The results show that moderate thickness, low defect density, moderate doping, and charge carrier mobility are favorable for better device performance due to low recombination losses, electrical losses, and better transport of charge carriers. The utmost power conversion efficiency values found for ZnPC- and ZnPC: PC70BM-based DSSCs after optimization were 9.50% and 9.81%. This paper also suggests a practical method for efficiently using DSSC cells by modifying factors that are significantly reliant on DSSC performance and output.
Aluminum antimonide (AlSb), a semiconductor compound, finds its applications in optoelectronics because of its tunable bandgap and promising properties achieved by tailoring suitable dopants. To explore the effects of doping, thin films of pure AlSb and 10% magnesium (Mg)-doped aluminum antimonide (MgAlSb) were synthesized through compound solution deposition on a glass substrate using a low-cost chemical bath deposition (CBD) technique at varying bath temperatures with deposition time intervals ranging from 60 to 180 min. Optical microscopy was used to evaluate the surface roughness and morphology of the synthesized films, revealing the surface roughness and thin film uniformity at different deposition times. The structural characteristics of AlSb and Mg-doped AlSb thin films were further examined using the X-ray diffraction technique, which validated the formation of AlSb and Mg-doped AlSb thin films. This research enables large-scale low-temperature deposition for a variety of conceivable applications in the coatings, materials penetration, energy, and photonic sectors due to the novel properties of this material.
The enhancement of production is expected due to formation of quark-gluon plasma in heavy-ion collisions. However, it is also expected that the production rate of meson can be affected by its interactions with comovers in hot hadronic gas. To study this effect we calculate the dissociation cross sections of meson by and mesons, including anomalous processes using an effective hadronic Lagrangian. Thermal averaged cross sections of are evaluated with a form factor when a cutoff parameter in it is 1 and 2 GeV. Using these cross sections in the kinetic equation, we study the time evolution of mesons in hot hadronic matter formed at LHC. We find that the effect of interactions with comovers is small but not negligible.
20 October 2026 in International Journal of Quantum Chemistry