Ben Festus

Ben Festus


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2024 in Materials Research Express
Verified
Journal Article
Open access
BFBen Festus
Ben Festus
POPeter A Olubambi
Peter A Olubambi
The utilization of agro waste as reinforcement in metal matrix composites (MMCs) has sparked interest regarding its feasibility and sustainability in engineering practices. Compared to synthetic reinforcements, its efficacy as a potentially cost-effective and environmentally friendly alternative has been explored by diverse studies. This review critically examines existing literature on agro waste-based reinforced MMCs, evaluating experimental findings on mechanical, tribological, density, and corrosion performance from a sustainable engineering perspective. Furthermore, it explores the innovative strategy of employing multi-component metal matrix composites to fabricate composites with improved performance attributes. The utilization of multi-component reinforcements has the capability to tackle issues like the challenge of disproportionate reduction in ductility and toughness peculiar to monolithic and hybrid MMCs. Despite promising results in some studies, numerous unexplored research areas and gaps remain, emphasizing the need for further investigation to provide valuable guidance for future research and development of agro waste in sustainable engineering applications.


17 May 2024 in Discover Applied Sciences
Verified
Journal Article
Open access
PDF file
BFBen Festus
Ben Festus
POPeter A. Olubambi
Peter A. Olubambi
The AA6063 alloy, renowned for its resistance against corrosion and favourable mechanical properties, has limited applications within the automotive and aerospace sectors owing to its reduced hardness and wear properties. Manihot esculenta and Plantago major are essential food crops contributing to environmental pollution. This study repurposes the Manihot esculenta peel ash (MEPA) and Plantago major peel ash (PMPA) as innovative reinforcements for the in-situ fabrication of Al2O3/AA6063 hybrid and monolithic composites (HMCs) using the two-step stir casting method. MEPA/Al2O3/AA6063 and PMPA/Al2O3/AA6063 HMCs, fabricated with novel weight percentage variations of 2, 4, 5, 6, 8, and 10%, underwent mechanical and tribological investigations. Although previous studies have examined the physio-mechanical properties of MEPA and PMPA in hybrid composites, their tribological performance remains unexplored. Additionally, using MEPA and PMPA as reinforcing elements in a monolithic aluminium matrix is novel. Oxide compositions and chemical constituents in MEPA and PMPA powders were determined, with fabricated MHCs characterized for SEM and energy-dispersive X-ray studies. Results revealed the presence of hard particulates, including SiO2 (44%), Al2O3 (16%), K2O (13%), CaO (12%), and Fe2O3 (8%) in MEPA powders, while PMPA powders were dominated by K2O (81%). Morphological studies showed uniform dispersion of reinforcements within the matrix. Composite hardness and wear resistance improved with rising MEPA weight ratios, contrasting with decreasing trends in PMPA particulates. Comparatively, MEPA showed a superior impact on the hardness and tribological performance of Al2O3/AA6063 HMCs compared to PMPA These findings highlight MEPA and PMPA as sustainable engineering solutions for aluminium matrix reinforcement.

20 February 2025 in Discover Materials
Verified
Journal Article
Open access
PDF file
BFBen Festus
Ben Festus
POPeter Apata Olubambi
Peter Apata Olubambi
The increasing demand for sustainable and eco-friendly lightweight materials in surface engineering has spurred the development of hybrid aluminum matrix composites (AMCs) that incorporate agro-waste residues as natural fillers. This study investigates the synergistic effects of plantain peel ash (PPA) and alumina (Al₂O₃) on the surface, mechanical, and tribological properties of Al–Mg-Si-based hybrid AMCs. A double-step stir-casting technique was employed to fabricate AMCs with varying weight proportions of PPA (2, 4, 6, and 8 wt.%) and Al₂O₃. Lightweight composites were produced with densities ranging from 2.60 to 2.73 g/cm3, with SEM analysis confirming uniform reinforcement dispersion within the matrix. Hardness values improved significantly with increasing Al₂O₃ weight percent, while surface roughness ranged from 2.38 to 3.52 µm, showing a statistically significant variation (p < 0.005). Tribological tests revealed wear rate increase from 1.34 × 10⁻3 to 2.90 × 10⁻3 mm3/m and coefficient of friction (COF) values ranging from 0.31 to 0.48, with 8% Al2O3 and 2% PPA showing the best wear resistance and lowest COF. These improvements were attributed to the enhanced interfacial bonding, ceramic-hardening effects of Al₂O₃, and lubricating properties of PPA at moderate reinforcement levels. The synergy balance was obtained using 4–6% Al2O3 and 6–4% PPA. This study underscores the potential of combining natural agro-waste-derived PPA with synthetic Al₂O₃ to fabricate lightweight high-performance AMCs. These findings highlight the environmental and industrial significance of integrating sustainable and synthetic reinforcements to produce advanced composites with enhanced surface integrity, wear resistance, and frictional stability for diverse engineering and aesthetic applications.

11 March 2024 in Discover Environment
Verified
Journal Article
Open access
PDF file
FAF. R. Amodu
F. R. Amodu
FBF. Ben
F. Ben
AAA. T. Agbele
A. T. Agbele
BFBen Festus
Ben Festus
OOO. A. Oyebanjo
O. A. Oyebanjo
The assessment of natural radionuclides in soil samples from artisanal gold mine sites in Iperindo, Nigeria was conducted using different analysis methods. Soil samples collected across three locations and within a control area were analyzed using well-calibrated gamma spectroscopy fitted with a sodium iodide detector. The average activity concentrations (ranges) of 238U, 232Th, and 40 K were found to be 61.55 ± 13.97 (33.40–87.00) Bqkg−1, 72.65 ± 16.83 (41.90–105.10) Bqkg−1, and 1134.99 ± 142.24 (720.50–1722.10) Bqkg−1, respectively for the mining areas and 15.26 ± 6.96 (10.90–20.10) Bqkg−1, 21.46 ± 9.35 (17.40–25.30) Bqkg−1, and 381.04 ± 51.27 (280.30–511.70) Bqkg−1, respectively for the control locations. The average activity concentrations of the radionuclides assessed were above the worldwide permissible limits for the Iperindo mining areas and below the worldwide average for the control areas. The investigation also assessed various radiological parameters, encompassing the radium equivalent, dose rate, annual effective dose rate, internal and external hazard indices, alpha and gamma indices, annual gonadal equivalent, and excess lifetime cancer risk. The recorded values for mine locations were 252.83 Bqkg−1, 119.98 nGyh−1, 0.15 mSvy−1, 0.85 Bqkg−1, 0.68 Bqkg−1, 0.31 Bqkg−1, 1.89 Bqkg−1, 850.23 μSvy−1, and 0.52 $$\times$$ × 10−3, respectively. Except for the radium equivalent, external and internal hazard risks, and the alpha index, which were notably below the recommended threshold, all the other radiological parameters exceeded the globally advised limits. All the radiological parameters from the control areas were below the worldwide average values.

30 January 2025 in MRS Advances
Verified
Journal Article
Open access
PDF file
BFBen Festus
Ben Festus
POPeter Apata Olubambi
Peter Apata Olubambi
The AA6063, renowned for its corrosion resistance, faces limitations in construction and building applications due to its low mechanical strength. Bean pod ash (BPAp), a byproduct of the agro-waste heat-treatment process, presents an innovative and sustainable alternative to synthetic reinforcements. This study aims to improve the mechanical properties of AA6063 by incorporating BPAp and a hybrid of BPAp and alumina. Four aluminum matrix composites (AMCs), including unreinforced AA6063, were fabricated using a two-step stir-casting process with 10 wt.% BPAp and alumina in varying weight ratios. The microstructure, porosity, hardness, tensile strength, Young’s modulus, and ductility of the AMCs were evaluated. SEM analysis showed uniform BPAp dispersion and porosity below 4%, indicating lightweight AMCs. The composites exhibited enhanced mechanical properties, showing increased hardness (74.70-to-105.04 BHN), tensile strength (118.87-to-207.49 MPa), ductility (5.00-to-12.22%), and Young’s modulus (13.25-to-15.63 GPa). These findings demonstrate that BPAp effectively enhances AA6063 and offers a cost-effective, eco-friendly reinforcement solution. Graphical abstract