This article presents a review on the applications of basalt fibers and their composites in infrastructures. The characteristics and advantages of high-performance basalt fibers and their composites are firstly introduced. Then, the article discusses strengthening using basalt fiber sheets and BFRP bars or grids, followed by concrete structures reinforced with BFRP bars, asphalt pavements, and cementitious composites reinforced with chopped basalt fibers in terms of mechanical behaviors and application examples. The load-bearing capacity of the strengthened structures can be increased by up to 60%, compared with those without strengthening. The lifespan of the concrete structures reinforced with BFRP can be extended by up to 50 years at least in harsh environments, which is much longer than that of ordinary reinforced concrete structures. In addition, the fatigue cracking resistance of asphalt can be increased by up to 600% with basalt fiber. The newly developed technologies including anchor bolts using BFRPs, self-sensing BFRPs, and BFRP–concrete composite structures are introduced in detail. Furthermore, suggestions are proposed for the forward-looking technologies, such as long-span bridges with BFRP cables, BFRP truss structures, BFRP with thermoplastic resin matrix, and BFRP composite piles.

Based on the cable-stayed beam model, this paper studies the nonlinear coupled vibration behavior of basalt fiber-reinforced polymer (BFRP) cables on long-span cable-stayed bridges under parametric excitation. Considering the sag, damping of BFRP cables, and the coupled interactions between stayed cables and the main girder, the nonlinear coupling vibration model of the BFRP cable–beam composite structure has been established. Taking the longest cable of Sutong Bridge as a case study, the nonlinear coupled vibration behavior of BFRP cables under parametric excitation has been numerically analyzed using the finite difference method. The analysis results indicate that (1) under parametric excitation, the large amplitude nonlinear vibration of the BFRP cable will be induced with an evident “beat” phenomenon. (2) Under the same parametric excitation, the nonlinear coupling vibration response and the beta frequency of the BFRP cable were both smaller than that of the traditional steel cable. (3) The nonlinear coupling vibration response of the BFRP cable increased with an increment in excitation amplitude and a decrement in cable force. With the increase in the excitation frequency, weight per unit length, and axial stiffness, the nonlinear vibration response of the BFRP cable increased first and then decreased. Meanwhile, the damping ratio of the BFRP cable had no significant influence on the nonlinear coupling vibration.

Concrete has become one of the most widely used structural materials in civil engineering

With the increasing frequency of natural disasters, such as earthquakes, floods, and typhoons, in recent years, the importance of resilient infrastructure has become increasingly prominent

To address the issues of traditional mooring lines, such as high self-weight, low strength, and poor durability, Carbon-Fiber-Reinforced Polymer (CFRP) was investigated as a material for mooring lines of offshore floating wind turbines, aiming to achieve high performance, lightweight design, and long service life for mooring systems. Based on a “chain–cable–chain” configuration, a CFRP mooring line design is proposed in this study. Taking a 5 MW offshore floating wind turbine as the research object, the dynamic performance of offshore floating wind turbines with steel chains, steel cables, polyester ropes, and CFRP mooring lines under combined wind, wave, and current loads was compared and analyzed to demonstrate the feasibility of applying CFRP mooring lines by combining the potential flow theory and the rigid–flexible coupling multi-body model. The research results indicate that, compared to traditional mooring systems such as steel chains, steel cables, and polyester ropes, (1) under static water, the CFRP mooring system exhibits a larger static water free decay response and longer free decay duration; (2) under operating sea conditions, the motion response and mooring tension of the offshore floating wind turbine with CFRP mooring lines are smaller than those with steel cables and steel chains but greater than those with polyester ropes; and (3) under extreme sea conditions, the motion responses of the offshore floating wind turbine with CFRP mooring lines are smaller than those with steel wire ropes and steel chains but close to the displacement responses of the polyester rope system, while the increase in mooring tension is relatively moderate and the safety factor is the highest.