Extremely large-scale multiple-input multiple-output (XL-MIMO) is a promising technology for the sixth-generation (6G) mobile communication networks. By significantly boosting the antenna number or size to at least an order of magnitude beyond current massive MIMO systems, XL-MIMO is expected to unprecedentedly enhance the spectral efficiency and spatial resolution for wireless communication. The evolution from massive MIMO to XL-MIMO is not simply an increase in the array size, but faces new design challenges, in terms of near-field channel modeling, performance analysis, channel estimation, and practical implementation. In this article, we give a comprehensive tutorial overview on near-field XL-MIMO communications, aiming to provide useful guidance for tackling the above challenges. First, the basic near-field modeling for XL-MIMO is established, by considering the new characteristics of non-uniform spherical wave (NUSW) and spatial non-stationarity. Next, based on the near-field modeling, the performance analysis of XL-MIMO is presented, including the near-field signal-to-noise ratio (SNR) scaling laws, beam focusing pattern, achievable rate, and degrees-of-freedom (DoF). Furthermore, various XL-MIMO design issues such as near-field beam codebook, beam training, channel estimation, and delay alignment modulation (DAM) transmission are elaborated. Finally, we point out promising directions to inspire future research on near-field XL-MIMO communications.
Global buildings account for about 30% of the total energy consumption and carbon emission, raising severe energy and environmental concerns. Therefore, it is significant and urgent to develop novel smart building energy management (SBEM) technologies for the advance of energy efficient and green buildings. However, it is a nontrivial task due to the following challenges. First, it is generally difficult to develop an explicit building thermal dynamics model that is both accurate and efficient enough for building control. Second, there are many uncertain system parameters (e.g., renewable generation output, outdoor temperature, and the number of occupants). Third, there are many spatially and temporally coupled operational constraints. Fourth, building energy optimization problems can not be solved in real time by traditional methods when they have extremely large solution spaces. Fifthly, traditional building energy management methods have respective applicable premises, which means that they have low versatility when confronted with varying building environments. With the rapid development of Internet of Things technology and computation capability, artificial intelligence technology find its significant competence in control and optimization. As a general artificial intelligence technology, deep reinforcement learning (DRL) is promising to address the above challenges. Notably, the recent years have seen the surge of DRL for SBEM. However, there lacks a systematic overview of different DRL methods for SBEM. To fill the gap, this article provides a comprehensive review of DRL for SBEM from the perspective of system scale. In particular, we identify the existing unresolved issues and point out possible future research directions.
3 December 2019 in IEEE Internet of Things Journal
In this paper, we investigate an energy cost minimization problem for a smart home in the absence of a building thermal dynamics model with the consideration of a comfortable temperature range. Due to the existence of model uncertainty, parameter uncertainty (e.g., renewable generation output, non-shiftable power demand, outdoor temperature, and electricity price) and temporally-coupled operational constraints, it is very challenging to design an optimal energy management algorithm for scheduling Heating, Ventilation, and Air Conditioning (HVAC) systems and energy storage systems in the smart home. To address the challenge, we first formulate the above problem as a Markov decision process, and then propose an energy management algorithm based on Deep Deterministic Policy Gradients (DDPG). It is worth mentioning that the proposed algorithm does not require the prior knowledge of uncertain parameters and building thermal dynamics model. Simulation results based on real-world traces demonstrate the effectiveness and robustness of the proposed algorithm.
In commercial buildings, about 40 total electricity consumption is attributed to Heating, Ventilation, and Air Conditioning (HVAC) systems, which places an economic burden on building operators. In this paper, we intend to minimize the energy cost of an HVAC system in a multi-zone commercial building with the consideration of random zone occupancy, thermal comfort, and indoor air quality comfort. Due to the existence of unknown thermal dynamics models, parameter uncertainties (e.g., outdoor temperature, electricity price, and number of occupants), spatially and temporally coupled constraints associated with indoor temperature and CO2 concentration, a large discrete solution space, and a non-convex and non-separable objective function, it is very challenging to achieve the above aim. To this end, the above energy cost minimization problem is reformulated as a Markov game. Then, an HVAC control algorithm is proposed to solve the Markov game based on multi-agent deep reinforcement learning with attention mechanism. The proposed algorithm does not require any prior knowledge of uncertain parameters and can operate without knowing building thermal dynamics models. Simulation results based on real-world traces show the effectiveness, robustness and scalability of the proposed algorithm.
25 September 2020 in IEEE Transactions on Wireless Communications
Mobile edge computing (MEC) has emerged as a new paradigm to assist low latency services by enabling computation offloading at the network edge. Nevertheless, human mobility can significantly impact the offloading decision and performance in MEC networks. In this context, we propose device-to-device (D2D) cooperation based MEC to expedite the task execution of mobile user by leveraging proximity-aware task offloading. However, user mobility in such distributed architecture results in dynamic offloading decision that instigates mobility-aware task scheduling in our proposed framework. We jointly formulate task assignment and power allocation to minimize the total task execution latency by taking account of user mobility, distributed resources, tasks properties, and energy constraint of the user device. We first propose Genetic Algorithm (GA)-based evolutionary scheme to solve our formulated mixed-integer non-linear programming (MINLP) problem. Then we propose a heuristic named mobility-aware task scheduling (MATS) to obtain effective task assignment with low complexity. The extensive evaluation under realistic human mobility trajectories provides useful insights into the performance of our schemes and demonstrates that, both GA and MATS achieve better latency than other baseline schemes while satisfying the energy constraint of mobile device.
5 February 2019 in IEEE Communications Surveys & Tutorials