In this paper, we consider the spectrum sharing planning problem for full-duplex unmanned aerial vehicle (UAV) relaying systems with underlaid device-to-device (D2D) communications, where a mobile UAV employed as a full-duplex relay assists the communication link between separated nodes without direct link. Our design aims to maximize the sum throughput under the transmit power budget, while guaranteeing the coexistence with terrestrial D2D pairs, satisfying the information causality and UAV’s trajectory constraints. Firstly, the transmit power planning with a given trajectory is investigated, where a successive convex algorithm is developed by leveraging the D.C. (difference of two convex) programming. Then, we propose a two-step trajectory design method for the given transmit power since the constraints of D2D pairs result in a non-convex feasible set. Further, an efficient spectrum sharing method for aerial UAV and terrestrial D2D communications is designed by alternately optimizing the transmit power and UAV’s trajectory. Finally, simulation results under various parameter configurations are provided to show the effectiveness of the proposed algorithms.
18 February 2019 in IEEE Geoscience and Remote Sensing Letters
In this letter, we consider the varying detection environments to address the problem of detecting small targets within sea clutter. We first extract three simple yet practically discriminative features from the returned signals in the time and frequency domains and then fuse them into a 3-D feature space. Based on the constructed space, we then adopt and elegantly modify the support vector machine to design a learning-based detector that enfolds the false alarm rate (FAR). Most importantly, our proposed detector can flexibly control the FAR by simply adjusting two introduced parameters, which facilitates to regulate detector's sensitivity to the outliers incurred by the sea spikes and to fairly evaluate the performance of different detection algorithms. Experimental results demonstrate that our proposed detector significantly improves the detection probability over several existing classical detectors in both low signal to clutter ratio (up to 58%) and low FAR (up to 40%) cases.
3 January 2018 in IEEE Transactions on Industrial Informatics
Huge demands for ubiquitous high data rate wireless communications have caused a sharp increase in energy consumption and greenhouse gas emission. In order to realize a sustainable development, it is critical to incorporate green communication technique into smart city developments. D2D communication has been recognized as one of the key technologies to improve data rate and reduce power consumption. In this paper, with the target of achieving green communications through D2D, we investigate the joint optimization of uplink subcarrier assignment and power allocation in D2D underlying cellular networks. Specifically, the problem formulation is to minimize the energy cost of all users in the system while guaranteeing the required data rate of both the D2D user equipments and cellular user equipments. Such an optimization problem is in general a mixed-integer nonlinear programming problem (MINLP) that is generally NP-hard. To make this problem tractable, we decompose it into the subcarrier assignment and power allocation subproblems. In particular, we design a heuristic algorithm to assign subcarrier by assuming that the transmit power is evenly allocated over all subcarriers. After that, we solve the power allocation subproblem by exploiting the difference between concave function (D.C.) structure of the constraints and transform it into a convex optimization problem. Simulation results demonstrate the remarkable improvement in terms of power consumption by using our algorithms.
8 March 2019 in IEEE Transactions on Vehicular Technology
Existing works have explored the anchor deployment for autonomous underwater vehicles (AUVs) localization under the assumption that the sound propagates straightly underwater at a constant speed. Considering that the underwater acoustic waves propagate along bent curves at varying speeds in practice, it becomes much more challenging to determine a proper anchor deployment configuration. In this paper, taking the practical variability of underwater sound speed into account, we investigate the anchor-AUV geometry problem in a 3-D timeof- flight (ToF) based underwater scenario from the perspective of localization accuracy. To address this problem, we first rigorously derive the Jacobian matrix of measurement errors to quantify the Cramer-Rao lower bound (CRLB) with a widely-adopted isogradient sound speed profile (SSP). We then formulate an optimization problem that minimizes the trace of the CRLB subject to the angle and range constraints to figure out the anchor-AUV geometry, which is multivariate and nonlinear and thus generally hard to handle. For mathematical tractability, by adopting tools from the estimation theory, we interestingly find that this problem can be equivalently transformed into a more explicit univariate optimization problem. By this, we obtain an easy-to-implement anchor-AUV geometry that yields satisfactory localization performance, referred to as the uniform sea-surface circumference (USC) deployment. Extensive simulation results validate our theoretical analysis and show that our proposed USC scheme outperforms both the cube and the random deployment schemes in terms of localization accuracy under the same parameter settings.