Laser cladding, a novel surface treatment technology, utilizes a high-energy laser beam to melt diverse alloy compositions and form a specialized alloy-cladding layer on the surface of the substrate to enhance its property. However, it can generate substantial residual stresses during the rapid cooling and heating stages, due to inadequate selection of cladding process parameters and disparities in thermophysical properties between the clad layer and substrate material, leading to the formation of various types of cracks. These cracks can significantly impact the quality and performance of the coating. This paper presents a comprehensive review of crack types and their causes in laser cladding coatings, and identifies that three primary sources of residual stresses, thermal stress, organizational stress, and restraint stress, are the fundamental causes of crack formation. The study proposes several strategies to control coating cracks, including optimizing the coating layer material, refining the coating process parameters, incorporating heat treatment, applying auxiliary fields, and utilizing numerical simulations to predict crack initiation and propagation. Additionally, the paper summarizes crack control methods for emerging structural materials and novel preparation processes. Lastly, the paper analyzes the prospects, technical approaches, and key research directions for effectively controlling cracks in laser cladding coatings.
11 May 2023 in Environmental Technology & Innovation
The amount of secondary aluminium dross in China exceeds one million tons annually, posing environmental and disposal challenges. This study explores acid leaching as an alternative to conventional alkali methods for recovering Al from secondary aluminium dross to produce Al2O3. Research has focused on optimizing leaching conditions. Under optimized H2SO4 leaching conditions, an Al3+ leaching ratio of 86.5% is achieved. By maintaining a pH below 9 during hydrolytic precipitation and multiple washes, the leaching efficiency of Al from Al(OH)3 reached 95.97%. The original dross, which is primarily composed of Al, Al2O3, and AlN, undergoes a transformation where AlN becomes Al(OH)3 during washing. Thermal decomposition then yields Al2O3. The overall recovery of Al reaches 83.11%.
Long-term thermal storage can decarbonize heat utilization by resolving mismatches between heat supply and demand. However, common heat storage materials cannot store energy for long periods. Here, we report an ultralong-term latent heat storage “glass” based on a ternary eutectic sugar alcohol mixture. The as-prepared material exhibits a solid–liquid phase change and glass transition at 423 and 289 K, respectively, with heat release via cold crystallization at 346 K. Remarkably, the glass transition temperature increases to 313 K after aging at ambient temperature for 12 hours due to structural relaxation. This phase change material (PCM) conserves the latent heat of fusion at 423 K for at least 180 days in the glass state at ambient temperature. These results establish a third-generation latent heat storage mode, retaining the charged state as a kinetically arrested amorphous solid and thereby fundamentally shifting the stability criterion from supercooled-liquid nucleation suppression to glass-transition and structural-relaxation kinetics.