13 December 2023 in Materials Advances
Development of Cu–12.8Si–20Al/Al 2 O 3 core–shell micro-encapsulated phase change materials (MEPCMs) via a dry synthesis mechanical impact technique.
18 December 2024 in Chemical Engineering Journal
DSDasanayake Aluthge Rasika Sanjeew
Dasanayake Aluthge Rasika Sanjeew
+1
14 August 2025 in Journal of Materials Chemistry A
The need for thermal energy storage as a middle-long duration energy storage technology has increased in tandem with the widespread adoption of variable renewable energy sources. Latent heat storage using metallic phase change materials (PCMs) presents a promising solution by combining high thermal conductivity with high heat storage density. Recent advances in microencapsulated PCMs (MEPCMs) have addressed corrosion and leakage issues commonly associated with metallic PCMs. This study develops an MEPCM composite, with suitable structure, performance, and strength for adapting GWh-scale thermal energy storage systems, using an Al–Cu–Si-based MEPCM as the primary component. The MEPCM composite is fabricated by microencapsulating Al–Cu–Si eutectic alloy powder, which has a eutectic temperature of 520 °C, with an Al oxide shell formed via chemical conversion and heat-oxidation treatments, followed by mixing with an alumina sintering aid, forming, and sintering. The composite exhibits a heat storage density of approximately 1.0 GJ m–3 under a temperature difference (ΔT) of 200 °C, which is 2–3 times higher than that of conventional sensible heat storage materials. It retains both its heat storage performance and structural integrity after 1000 thermal cycles. The thermal conductivity ranges from 4.1 to 6.6 W m–1 K–1 between 300 and 600 °C. This study is the first to evaluate the compressive strength of composite PCMs in the liquid state, where the composite retains a compressive strength of 32 MPa at 600 °C—a value comparable to that of ordinary concrete. In the solid state, the composite exhibits 83 MPa at room temperature and 49 MPa at 500 °C. Thus, MEPCM composites are expected to possess substantial compressive strength for applications in medium-to-high-temperature heat storage and thermal management systems, even beyond the eutectic temperature of the PCM.
21 July 2025 in Journal of Materials Chemistry A
Heat storage heater can convert electricity into heat and store the high-temperature heat above 400 °C in the form of latent heat. This novel device is expected to be applied to Carnot batteries and power to heat technologies.
10 December 2024 in Reaction Chemistry & Engineering
Ammonia is important for energy diversification and security due to its ability to transport hydrogen in the form of relatively safe and high-energy-density compounds. Ammonia decomposes into hydrogen and nitrogen gases via a highly endothermic catalytic process. For an endothermic reversible reaction, an undesirable decrease in the reactor temperature shifts the operating line to a lower equilibrium conversion point, resulting in an economic loss for the plant. The objective of this study was to develop a strategy to provide alternative energy to the endothermic reaction during the decrease in temperature. Accordingly, an Al–Si-based microencapsulated phase change material (MEPCM) was used as a heat-regulating catalyst for the ammonia decomposition reaction. The MEPCM structure consists of a spherical oxide shell and metal core that can store thermal energy based on the principle of latent heat storage. Different transition metals, such as Ni, Co, and Fe, were impregnated into the as-prepared 45 μm Al–Si MEPCM catalyst support with a core melting point of 577 °C and heat storage capacity of 285 J g−1. The effects of these metals on the reaction performance were then evaluated. Furthermore, various parameters such as the phase composition, morphology, and thermal properties of the samples were characterized using X-ray diffraction, Brunauer–Emmett–Teller analysis, scanning electron microscopy-energy-dispersive X-ray spectroscopy, and differential scanning calorimetry. Under controlled cooling, the pre-melted core demonstrated heat regulation ability by maintaining a higher temperature and achieving 2–14% higher conversion than the solid core state. By implementing the concept proposed herein, chemical industries can improve their technology to stabilize the reaction temperature.
18 July 2026 in Energy & Fuels