The objective of this study is to investigate the effect of the Baltic Sea non-tidal loading in the territory of Latvia using observations of the GNSS continuously operating reference stations (CORS) of LatPos, EUPOS^®-Riga, EPN and EstPos networks. The GNSS station daily coordinate time series obtained in a double-difference (DD) mode were used. For representation of the sea level dynamics, the Latvian tide gauge records were used. Performed correlation analysis is based on yearly data sets of these observations for the period from 2012 up to 2020. The approach discloses how the non-tidal loading can induce variations in the time series of the regional GNSS station network. This paper increases understanding of the Earth’s surface displacements occurring due to the non-tidal loading effect in Latvia, and is intended to raise the importance and necessity of improved Latvian GNSS time series by removing loading effects.

There is an urgent necessity for a highly accurate and reliable geoid model to enable prompt determination of normal height with the use of GNSS coordinate determination due to the high precision requirements in geodesy, building and high precision road construction development. Additionally, the Latvian height system is in the process of transition from BAS- 77 (Baltic Height System) to EVRS2007 system. The accuracy of the geoid model must approach the precision of about ~1 cm looking forward to the Baltic Rail and other big projects. The use of all the available and verified data sources is planned, including the use of enlarged set of GNSS/levelling data, gravimetric measurement data and, additionally, the vertical deflection measurements over the territory of Latvia. The work is going ahead stepwise. Just the issue of GNSS reference network stability is discussed. In order to achieve the ~1 cm precision geoid, it is required to have a homogeneous high precision GNSS network as a basis for ellipsoidal height determination for GNSS/levelling points. Both the LatPos and EUPOS® - Riga network have been examined in this article.

The GPS observations of both Latvian permanent GNSS networks - EUPOS^®-Riga and LatPos, have been collected for a period of 8 years - from 2007 to 2014. Local surface displacements have been derived from the obtained coordinate time series eliminating different impact sources. The Bernese software is used for data processing. The EUREF Permanent Network (EPN) stations in the surroundings of Latvia are selected as fiducial stations. The results have shown a positive tendency of vertical displacements in the western part of Latvia - station heights are increasing, and negative velocities are observed in the central and eastern parts. Station vertical velocities are ranging in diapason of 4 mm/year. In the case of horizontal displacements, site velocities are up to 1 mm/year and mostly oriented to the south. The comparison of the obtained results with data from the deformation model NKG_RF03vel has been made. Additionally, the purpose of this study is to analyse GPS time series obtained using two different data processing strategies: Precise Point Positioning (PPP) and estimation of station coordinates relatively to the positions of fiducial stations also known as Differential GNSS.

The determination of parameters for identifying stars sensed by charge-coupled device (CCD) is discussed. Numerical experiments are summarized which support the parameter space bound estimation practicality of the proposed star pattern recognition and identification by matching with coordinate list in star catalogue. The parameter analysis performed to apply them for proper identification algorithm which is developed and used at the Institute of Geodesy and Geoinformatics. This algorithm is applied for identification of large volume star sets.