Free radical scavenging activity, total phenolic content and the chemical composition of the essential oil isolated by steam distillation from Artemisia dracunculus L. was investigated. The isolation yield was 0.24% (v/w) based on the fresh plant material (leaves). GC-MS investigation identified 21 components, accounting 99.93% of the total amount. The major components were sabinene (42.38%), isoelemicin (12.91%), methyl eugenol (9.09%), elemicin (7.95%) and beta-ocimene (6.46%). The free radical scavenging activity of the essential oil of Artemisia dracunculus L. was evaluated in vitro by the DPPH assay (IC50 = 0.730 � 0.213 mg/mL), BHA and alpha-tocopherol were used as a positive control. The total phenolic content of the tarragon essential oil was evaluated by the Folin-Ciocalteu method (GAE = 0.451 � 0.001 mg/g sample). In view of these data, we consider that tarragon essential oil could represent a new antioxidants source as a reliable option to reduce the usage of synthetic additives.

This paper aims to study the potential of whey, a by-product in the dairy industry, to be used as a sustainable and health-promoting ingredient in baking. In this regard, whey powder (WhF) was produced and incorporated into three composite flours consisting of wheat flour and whey powder in proportions of 5% (WhWF5), 10% (WhWF10), and 15% (WhWF15). These composite flours were then used to produce bread. The nutritional properties (proximate composition, macro and microelement content) and bioactive compounds (total polyphenols and antioxidant activity) were assessed for both the composite flours and the resulting breads. In addition, the rheological behavior of the dough was evaluated using the Mixolab system, while the microstructural characteristics and physical properties of the composite flours were analyzed using Small/Wide Angle X-ray Scattering (SAXS/WAXS) and Fourier Transform Infrared Spectroscopy (FTIR). Sensory evaluation of the breads was also performed. The results demonstrated a positive effect of the whey powder addition on the nutritional profile of both composite flours and bakery products, particularly through increased protein levels (25.24–37.77% in fortified flours vs. 11.26% in control; 16.64–18.89% in fortified breads vs. 14.12% in control) and enhanced mineral content (11.27–80.45% higher compared to white wheat bread), alongside a reduction in carbohydrate content. Bread fortified with 15% whey powder showed higher monolement with increases of 27.80% for K, 7.01% for Mg, and 28.67% for Ca compared to control bread without whey. The analysis of the Mixolab charts confirmed the progressive influence of whey powder on dough rheology. While water absorption remains high, other functional parameters, such as gluten quality, kneading capacity, and starch viscosity, were negatively affected. Nonetheless, the nutritional advantages and reduced retrogradation tendency may offset these drawbacks in the context of developing functional bakery products. Formulations containing 5–10% whey powder appear to offer an optimal balance between technological performance, nutritional quality, and sensory acceptance.

This study evaluated the impact of incorporating taro flour (Colocasia esculenta) into wheat-based biscuit formulations, focusing on nutritional, phytochemical, rheological, technological, and organoleptic characteristics. Four distinct types of biscuits were formulated with 0% (CC), 10% (TWC1), 20% (TWC2), and 30% (TWC3) taro. The results indicate that taro flour (TF) has a higher moisture, ash, and gallic acid content, as well as significant mineral richness, particularly in potassium, magnesium, and calcium, compared to wheat flour (WF). It has been shown that the gradual incorporation of TF (10 to 30%) into composite flours improves the bioavailability of certain micronutrients and polyphenols, while maintaining a harmonious balance with the flavonoids characteristic of wheat, such as quercetin. The evaluation of antioxidant activity indicates a higher value for TF (50.71%) compared to WF (36.53%), with a significant increase in activity observed in enriched cookies (58.92% for TWC3 vs. 31.36% for CC). In addition, the incorporation of taro flour modifies the technological properties of the cookies, resulting in a decrease in thickness and baking yield, as well as an increase in diameter and spread rate. This modification may result in a crisper texture. However, a high substitution rate (30%) resulted in a decrease in dough stability and baking yield due to a reduction in gluten and a change in dough structure. In terms of antinutritional profile, partially replacing wheat flour with taro flour significantly reduces phytic acid content, while moderately increasing oxalate content. Sensory analysis of different types of cookies indicated that moderate substitution levels (10%) tended to improve or maintain sensory quality, while higher substitution levels (20% and 30%) tended to reduce overall acceptability. Linear correlations showed a positive relationship between antioxidant activity and polyphenols and minerals, but a negative relationship with proteins and specific technological properties. In summary, the incorporation of taro flour into cookie formulations represents a promising strategy for improving the nutritional value and functional potential of baked goods without compromising their technological quality. These results confirm the value of taro as a functional ingredient that can contribute to the development of healthy foods.

Enriching bread with functional ingredients is a promising strategy to enhance the nutritional and bioactive profile of widely consumed foods. This study evaluated partial substitution of wheat flour (WF) with chestnut flour (CF) and rosehip powder (RP) on bread nutritional quality, functionality, and rheology. Five bread formulations were developed by replacing WF with CF at 0%, 5%, 10%, 15%, and 20%. Four other formulations were prepared by replacing WF in the 15% CF sample with RP at 0.5%, 1%, 2%, and 3%. Proximate composition, total phenolic content (TPC), total flavonoid content (TFC), antioxidant activity (DPPH and FRAP), and key physical characteristics were assessed, alongside the retention rates of functional attributes after baking. Rheological behavior of composite flours was analyzed using the MIXOLAB system to evaluate dough performance. Results showed that moderate WF substitution with CF (5–15%) increased dietary fiber and antioxidant activity while maintaining acceptable dough rheology and bread quality. At 20% CF substitution, TPC, TFC, FRAP, and DPPH increased 1.62-, 1.63-, 2.93-, and 3.03-fold versus control, with 59–66% retention. Addition of RP up to 3% to the 15% CF-substituted sample further enhanced bioactive properties, with TPC, TFC, FRAP, and DPPH reaching 2.13-, 2.03-, 4.49-, and 3.99-fold vs. BCF15, while retaining 61–67% of their functionality. Further inclusion of RP up to 2% in the 15% CF formulation maintains acceptable dough and bread performance, while 3% RP maximizes phytochemical enrichment but slightly affects technological properties. The combination of 15% CF and 2% RP provided a balanced enhancement in bioactive content and technological performance, offering a practical approach for producing functional bread with improved nutritional and technological attributes.

This study aimed to examine the impact of using sunflower seed meal (SM) on the nutritional, phytochemical, rheological, physicochemical, and sensory qualities of wheat bread. Four bread types were formulated with 0, 10, 20, and 30% SM (CB, SMWB1, SMWB2, and SMWB3, respectively). Both the composite flours and the resulting breads were evaluated to assess the impact of increasing SM levels. The results revealed that SM was richer than wheat flour in minerals, protein, lipids, total polyphenols, and antioxidants activity. The gradual incorporation of SM into WF improved the composition of these substances in the composite flours and breads obtained. Among all formulations, SMWB1 (10% SM) exhibited the most balanced characteristics, combining nutritional enhancement with satisfactory technological quality. This bread showed a porous crumb structure (62.43% porosity), good elasticity (57.28%), and an acceptable height-to-diameter ratio (0.47). Based on these results, SMWB1 was selected for further technological optimization. The improved formulation (SMWB10) was rich in nutrients and had better physicochemical and organoleptic characteristics and a reduced antinutritional effect of phytic acid, thanks to the fermentation applied during its production. Thus, incorporating 10% sunflower meal into wheat bread improves its nutritional and phytochemical composition, particularly in terms of proteins, minerals, polyphenols, and antioxidants.

In response to the increasing consumer demand for healthier diets and the needs of individuals with gluten intolerance, chestnut flour (CF) emerges as a valuable unconventional ingredient for sustainable and functional nutrition. This study evaluated the nutritional, phytochemical, and functional properties of gluten-free biscuits formulated with whole rice flour (RF), CF, and their mixtures, where RF was replaced by CF at 0% (control), 10%, 30%, 70%, 90%, and 100% (w/w). In addition, in the 50% CF formulation, 5% of RF was substituted with fruit powders rich in phenolic compounds and recognized as fortifying agents, such as chokeberry (CP), açaí (AP), and blueberry (BP). Proximate composition, macro- and microelement content, total phenolic content (TPC), total flavonoid content (TFC), and antioxidant activity (DPPH and FRAP assays) were determined for the individual flours, composite flours, fruit powders, and biscuit formulations. Structural characteristics were assessed using Small- and Wide-Angle X-ray Scattering (SAXS/WAXS) analysis and Fourier Transform Infrared Spectroscopy (FTIR). Results showed that CF incorporation enhanced both the nutritional and functional profile of flours and biscuits, increasing protein, fiber, lipid, and mineral contents while reducing carbohydrates, and improving TPC, TFC, DPPH, and FRAP values. Fortification with 5% CP, AP, or BP further boosted the phytochemical content of the biscuits, with the chokeberry-enriched sample exhibiting the highest TPC (348.88 mg GAE/100 g d.s.), TFC (253.82 mg QE/100 g d.s.), DPPH (50.36%), and FRAP (21.07 μM Fe²⁺/g d.s.). The combination of 50% CF and 5% CP provided dual benefits, significant bioactive enrichment alongside the preservation of desirable technological properties. Complementary SAXS/WAXS and FTIR analyses indicated that CF and fruit powders enhanced molecular interactions and matrix cohesion, which may contribute to improved texture and antioxidant potential of the biscuits. Overall, this formulation offers a promising and practical approach to developing functional gluten-free biscuits with enhanced nutritional, phytochemical, functional, and structural characteristics.