We report a facile template-free microwave-assisted approach to synthesize ZnO hollow microspheres. Field emission scanning electron microscopic and transmission electron microscopic results revealed that the average dimensions of these hollow microspheres were about 4 μm in diameter and 400 nm in thickness of spherical shell. Interestingly, the “hollowness” of these ZnO spheres could be adjusted by varying the microwave irradiation time. Moreover, various distinct ZnO structures could be obtained by simply changing the amounts of trisodium citrate dihydrate. On the basis of these results, a possible formation mechanism was proposed. Gas sensors were fabricated based on as-prepared hollow spheres, and their gas sensing properties were tested for response to ethanol and methanol.
Multi-layer black phosphorus (m-BP) has been successfully incorporated in zinc oxide (ZnO) hollow spheres, thus forming hetero-structured ZnO–BP composites; a study performed on their properties reveals that the BP environmental stability can be significantly enhanced by the introduction of ZnO, and the sensors based on ZnO–BP composites exhibit high response, fast response behavior, outstanding selectivity, and ultralow detection limit of 1 ppb towards NO2 gas molecules. The ultrasensitive sensing performance is suggested to be due to the large surface area, excellent carrier mobility, and enhanced charge transfer of ZnO–BP in the presence of BP. Moreover, the mechanism of NO2 sensing with ZnO–BP is confirmed by the calculations obtained from the first-principle studies.
An active and stable gas-sensing material for SO2 at room temperature is presented. The particles synthesized using zinc-doped ZIFs as the precursor exhibit a porous polyhedral morphology with abundant interconnecting carbon nanotubes on the surface and improved conductivity.
ZnO/graphene (ZnO-G) hybrid composites are prepared via hydrothermal synthesis with graphite, N-methyl-pyrrolidone (NMP), and Zn(NO3)2·6H2O as the precursors. The characterizations, including X-ray diffraction (XRD), thermogravimetric analyses (TGA), Raman spectroscopy, and transmission electron microscopy (TEM) indicate the formation of ZnO-G. Gas sensors were fabricated with ZnO-G composites and ZnO as sensing material, indicating that the response of the ZnO towards acetone was significantly enhanced by graphene doping. It was found that the ZnO-G sensor exhibits remarkably enhanced response of 13.3 at the optimal operating temperature of 280 °C to 100 ppm acetone, an improvement from 7.7 with pure ZnO.
A reduced grapheme oxide (rGO)/Au hybrid nanocomposite has been synthesized by hydrothermal treatment using graphite and HAuCl4 as the precursors. Characterization, including X-ray diffraction (XRD), Raman spectra, X-ray photoelecton spectroscopy (XPS) and transmission electron microscopy (TEM), indicates the formation of rGO/Au. A gas sensor fabricated with rGO/Au nanocomposite was applied for NO2 detection at 50 °C. Compared with pure rGO, rGO/Au nanocomposite exhibits higher sensitivity, a more rapid response–recovery process and excellent reproducibility.
9 January 2017 in Journal of Materials Chemistry C
We investigate the interactions between volatile organic compounds (VOCs, including ethanol, acetone and propanal) and pristine, defective and transition metal-functionalized MoS2using the first-principles method.