The goaf treatment of underground metal mines is an important link in mining, and it is particularly important to master the laws of overlying rock strata and surface movement of goaf. In this paper, Persistent Scatterer Interferometric Synthetic Aperture Radar (PS-InSAR) technology is used to monitor the surface subsidence of the Taibao lead-zinc mine, and the surface subsidence laws of goaf-closure, partial-filling, and full-filling treatments are analyzed by the time-series method. The findings indicate that the surface subsidence of the closed goaf is solely governed by the pillars, with the quality of these pillars playing a pivotal role in controlling such subsidence. Factors like stope span also influence the surface subsidence of partially filled goaf. Prior to compaction, it is primarily the pillars that control surface subsidence; however, after compaction, filling and pillars jointly regulate this phenomenon. Notably, in filled goaf, the quality of both roof and pillars significantly impacts surface subsidence. Before compaction occurs, control over surface subsidence is not evident, yet post-compaction, the filling is effective and tends to stabilize this process. The research findings are significant in enhancing goaf’s treatment efficacy, mitigating surface damage and minimizing ecological environmental impact.
Stope structural parameters are of great significance for the safe production of mines. To efficiently and safely mine steeply dipping ultra-thick ore bodies, the K. Kegel strength design formula and limit analysis method were used to calculate a reasonable range of stope parameters. Considering the actual mining conditions, the mechanical responses under different structural parameters were obtained through numerical simulations based on a central composite experimental design. A regression model for maximum tensile stress, maximum compressive stress, and maximum vertical displacement was established using the second-order response surface method. The regression model was then used as the objective function, and multi-objective optimization was performed using a simulated annealing algorithm to obtain the Pareto optimal solution set. Based on practical engineering needs, a stope span of 15.0 m, a pillar width of 10.0 m, and a roof thickness of 11.9 m were determined as the optimal structural parameters, achieving a balance between safety and economic efficiency.
To ensure the green, safe, and efficient extraction of mineral resources and promote sustainability, the stability of mined-out areas has become a critical factor affecting safe production and ecological restoration in underground metal mines. The instability of underground goafs poses a significant threat to mine safety, especially when irregular excavation patterns interact with high ground stress, exacerbating instability risks. Most existing studies lack a systematic and multidisciplinary integrated framework for comprehensive evaluation and management. This paper proposes a trinity research system of “assessment–optimization–governance”, integrating theoretical analysis, three-dimensional fluid–solid coupling numerical simulation, and a filling sequence optimization method based on genetic algorithms. An analysis of data measured from 243 pillars and 49 goafs indicates that approximately 20–30% of the pillars have a factor of safety (FoS) below 1.0, signaling immediate instability risks; additionally, 58% do not meet the threshold for long-term stability (FoS ≥ 1.5). Statistical and spatial analyses highlight that pillar width-to-height ratio (W/H) and cross-sectional area significantly influence stability; when W/H exceeds 1.5, FoS typically surpasses 2.0. Numerical simulations reveal pore water pressures of 1.4–1.8 MPa in deeper goafs, substantially reducing effective stress and accelerating plastic zone expansion. Stability classification categorizes the 49 goafs into 7 “poor”, 37 “moderate”, and 5 “good” zones. A genetic algorithm-optimized filling sequence prioritizes high-risk area remediation, reducing maximum principal stress by 60.96% and pore pressure by 28.6%. Cemented waste rock filling applied in high-risk areas, complemented by general waste rock filling in moderate-risk areas, significantly enhances overall stability. This integrated method provides a scientific foundation for stability assessment and dynamic remediation planning under complex hydrogeological conditions, offering a risk-informed and scenario-specific application of existing tools that improves engineering applicability.
The rock strata movement deformation generated by the mining process of the mine will inevitably lead to surface subsidence and a series of environmental hazards, so it is particularly important to monitor the rock strata movement deformation and surface subsidence in the goaf area. With the development of surface subsidence monitoring technology, InSAR technology has been widely used in the research of surface subsidence in mining areas with the advantages of high precision and wide monitoring. In this paper, by obtaining the image data of 59 Sentinel-1A scenes in the mining area, the obtained PS points were analyzed and processed by ArcGIS difference analysis by PS-InSAR technology, and the surface deformation cloud map and settlement curve of the mining area in various periods were obtained, and the rock strata movement deformation and surface subsidence law of the goaf before treatment and after different treatment methods were studied by influencing factors such as stope layout and mining depth. The results show that the rock strata movement deformation and surface subsidence degree of the goaf under different treatment methods are different due to different influencing factors, and their positions also change dynamically with time. Applying InSAR technology to study rock strata movement deformation and surface subsidence can provide an important basis for mine safety mining, goaf treatment, rock strata movement deformation and surface subsidence monitoring.
Mine-induced surface subsidence threatens infrastructure and can trigger cascading geohazards, so accurate and computationally efficient monitoring and forecasting are essential for early warning. We integrate Persistent Scatterer InSAR (PS-InSAR) time series with a Bayesian-optimized CNN–LSTM designed for spatiotemporal prediction. The CNN extracts spatial deformation patterns, the LSTM models temporal dependence, and Bayesian optimization selects the architecture, training hyperparameters, and the most informative exogenous drivers. Groundwater level and backfilling intensity are encoded as multichannel inputs. Endpoint anchoring with affine calibration aligns the historical series and the forward projections. PS-InSAR indicates a maximum subsidence rate of 85.6 mm yr−1, and the estimates are corroborated against nearby leveling benchmarks and FLAC3D simulations. Cross-site comparisons show acceleration followed by deceleration after backfilling and groundwater recovery, which is consistent with geological engineering conditions. A symmetry-aware preprocessing step exploits axial regularities of the deformation field through mirroring augmentation and documents symmetry-breaking hotspots linked to geological heterogeneity. These choices improve generalization to shifted and oscillatory patterns in both the spatial CNN and the temporal LSTM branches. Short-term forecasts from the BO–CNN–LSTM indicate subsequent stabilization with localized rebound, highlighting its practical value for operational planning and risk mitigation. The framework combines automated hyperparameter search with physically consistent objectives, reduces manual tuning, enhances reproducibility and generalizability, and provides a transferable quantitative workflow for forecasting mine-induced deformation in complex goaf systems.
About Me
Huang Xuxing, born in Sanming City, Fujian Province, master candidate, research direction is mine safety.
Huang Xuxing, born in Sanming City, Fujian Province, master candidate, research direction is mine safety.