Previous studies have shown that the contact wear estimation of circuit breakers can be based on the accumulative arc duration. However, one problem that remains unresolved is how to reliably measure the arc duration. Existing methods encounter difficulties in implementation and suffer from limited accuracy owing to the impact of the substation environment. To overcome these issues, this article presents a novel, non-invasive method for measuring arc duration that combines vibration–sound fusion and convolutional neural network. The proposed method demonstrates excellent performance, achieving errors below 0.1 ms under expected noise conditions and less than 1 ms in the presence of various forms of noise, transient interference, and even sensor failure. Its advantages include its ability to accurately measure arc duration and its robustness against noise and interference with unknown patterns and varying intensity as well as sensor failure. These features make it highly suitable for practical deployment in substation environments.
With an increasing share of distributed generation, vacuum interrupters see more switching operations, which makes them more susceptible to contact wear and reduced life expectancy. Past studies have shown the correlation between arc duration and loss of contact mass during load switching. Contact wear estimation for condition-based maintenance can be based on measuring the accumulative arc duration. However, one problem that remains unresolved is how to reliably measure arc duration. Existing methods are associated with implementation challenges, limited accuracy, and inadequate reliability. To achieve an accurate and robust arc duration measurement, this paper proposes a non-invasive online arc duration measurement method based on multi-sensor fusion. Multiple sensors are set in different locations to capture the very-low-frequency and low-frequency magnetic field and electric field, vibration, and acoustic signals during the load-switching event of a vacuum interrupter. Various sensor fusion algorithms, including 1D Convolutional Neural Networks, are used for data fusion and for determining the arc duration. The results demonstrate that the proposed method of multi-sensor fusion can effectively determine arc duration with a low error rate of less than 0.2ms, and the method is robust to noise interference and sensor failure.
Polymer film capacitors are indispensable for energy storage and power conversion, yet their energy density and efficiency deteriorate rapidly at elevated temperatures. At temperatures relevant to wide‐bandgap semiconductor electronics (>150°C), heat‐resistant polymer films must be heavily derated to avoid premature aging due to intensive hot‐carrier injection. Inspired by multilayered barrier structures in nature, we developed a scalable roll‐to‐roll self‐assembled organic‐inorganic nanolaminate coating that significantly enhances the high‐temperature dielectric performance of polymer films. The nanolaminate architecture introduces dual confinement mechanisms: nanoconfinement of the polymer binder suppresses chain motion and enhances thermal stability, while anisotropic carrier relaxation within two‐dimensional nanoclay nanosheets impedes through‐plane hot‐carrier transport. Together, these effects synergistically establish an interface‐rectification mechanism that promotes in‐plane energy dissipation and suppresses carrier injection at electrode‐polymer interfaces. At 150°C, the coating significantly reduces the pre‐breakdown conduction current of polyetherimide (PEI), increases the breakdown strength from 450 to 501 MV/m, and improves the discharged energy density at 95% efficiency by 105%. Furthermore, roll‐to‐roll‐coated PEI capacitors exhibit a 45‐fold lifetime enhancement at 150°C and 180 MV/m—a design field previously sustained only by BOPP below 60°C. This work provides a scalable and technology‐ready strategy for high‐temperature, high‐density polymer capacitive energy storage.
16 October 2026 in Journal of Physics D: Applied Physics
Emerging technologies in sensing, filtration, and energy harvesting demand polymer electrets with highly stable and long-lasting electric fields. While most approaches improve charge stability by increasing trap density through heterogeneous structures, controlling trap depth through morphology engineering remains largely unexplored. Here, strain programming is employed to regulate trap depth in polyethylene terephthalate (PET) electrets. Uniaxial and sequential biaxial stretching induce chain orientation and strain-induced crystallization, producing increasingly oriented and constrained semicrystalline morphologies. Structural characterization confirms progressive increases in crystallinity and molecular orientation. Thermally stimulated depolarization current measurements show that the apparent activation energy for trapped charge release increases from 1.28 to 2.12 eV, accompanied by a shift of the depolarization peaks to higher temperatures. Surface-potential decay measurements further confirm a strong correlation between activation energy and long-term charge retention, with biaxially oriented PET exhibiting approximately threefold greater retained potential than weakly oriented PET after 3000 h. The results demonstrate that strain-induced changes in semicrystalline morphology strongly influence charge-trap energetics and are consistent with increased restriction of amorphous-chain mobility at crystalline-amorphous interfaces. These findings identify strain programming as an effective and scalable approach for intrinsic deep trap engineering in polymer electrets.
Programmable nanolaminate coatings enhance corona resistance through synergistic through-plane erosion blocking and in-plane charge dissipation—new principle for corona protection. The graphical abstract was created with Microsoft Copilot.