13 February 2025 in Chemical Engineering Journal
4 August 2025 in Applied Physics Letters
Conductive Atomic Force Microscopy (C-AFM) was used to investigate if conductive by-products exist within surface tracks—closely related to electrical trees—that are generated by high-power surface flashover events on epoxy nanocomposites used in high-breakdown dielectric applications. Here, we show that topography measurements alone are insufficient to identify conductive surface tracks unambiguously. Instead, by mapping DC currents flowing into the sample from the scanned C-AFM tip, conductive tracks up to three orders of magnitude less resistive than adjacent epoxy nanocomposite material are revealed. Ohmic behavior was confirmed by systematically incrementing the applied voltage, thereby providing a unique method for directly quantifying and mapping the conductivity in electrical breakdown-induced surface tracks, with potential for future applications to the investigation of bulk electrical trees.
14 October 2026 in Advanced Science
Polymer film capacitors are indispensable for energy storage and power conversion, yet their energy density and efficiency deteriorate rapidly at elevated temperatures. At temperatures relevant to wide‐bandgap semiconductor electronics (>150°C), heat‐resistant polymer films must be heavily derated to avoid premature aging due to intensive hot‐carrier injection. Inspired by multilayered barrier structures in nature, we developed a scalable roll‐to‐roll self‐assembled organic‐inorganic nanolaminate coating that significantly enhances the high‐temperature dielectric performance of polymer films. The nanolaminate architecture introduces dual confinement mechanisms: nanoconfinement of the polymer binder suppresses chain motion and enhances thermal stability, while anisotropic carrier relaxation within two‐dimensional nanoclay nanosheets impedes through‐plane hot‐carrier transport. Together, these effects synergistically establish an interface‐rectification mechanism that promotes in‐plane energy dissipation and suppresses carrier injection at electrode‐polymer interfaces. At 150°C, the coating significantly reduces the pre‐breakdown conduction current of polyetherimide (PEI), increases the breakdown strength from 450 to 501 MV/m, and improves the discharged energy density at 95% efficiency by 105%. Furthermore, roll‐to‐roll‐coated PEI capacitors exhibit a 45‐fold lifetime enhancement at 150°C and 180 MV/m—a design field previously sustained only by BOPP below 60°C. This work provides a scalable and technology‐ready strategy for high‐temperature, high‐density polymer capacitive energy storage.
16 October 2026 in Journal of Physics D: Applied Physics
Emerging technologies in sensing, filtration, and energy harvesting demand polymer electrets with highly stable and long-lasting electric fields. While most approaches improve charge stability by increasing trap density through heterogeneous structures, controlling trap depth through morphology engineering remains largely unexplored. Here, strain programming is employed to regulate trap depth in polyethylene terephthalate (PET) electrets. Uniaxial and sequential biaxial stretching induce chain orientation and strain-induced crystallization, producing increasingly oriented and constrained semicrystalline morphologies. Structural characterization confirms progressive increases in crystallinity and molecular orientation. Thermally stimulated depolarization current measurements show that the apparent activation energy for trapped charge release increases from 1.28 to 2.12 eV, accompanied by a shift of the depolarization peaks to higher temperatures. Surface-potential decay measurements further confirm a strong correlation between activation energy and long-term charge retention, with biaxially oriented PET exhibiting approximately threefold greater retained potential than weakly oriented PET after 3000 h. The results demonstrate that strain-induced changes in semicrystalline morphology strongly influence charge-trap energetics and are consistent with increased restriction of amorphous-chain mobility at crystalline-amorphous interfaces. These findings identify strain programming as an effective and scalable approach for intrinsic deep trap engineering in polymer electrets.