Aluminum and aluminum-based alloys have been used for many years. In view of the increase in material purity requirements of advanced technology products, research regarding high-purity aluminum has gained significant attention in recent years. In this review, we seek to describe the fundamental purification principles and the mechanisms of various segregation techniques used to produce high-purity aluminum. Moreover, we aim to provide an overview of high-purity aluminum production, with particular emphasis on: (a) principles on how to produce high-purity aluminum by layer- and suspension-based segregation methods; (b) discussion of various influencing process parameters for each technique, including three-layer electrolysis, vacuum distillation, organic electrolysis, suspension-based segregation, zone melting, Pechiney, Cooled Finger, and directional solidification; as well as (c) investigations of fundamental working principles of various segregation methods and corresponding reported end-purification for the production of HP-Al. Eventually, the end-reported product purity, and advantages and disadvantages of various purification methods and technologies are summarized. By analyzing and comparing the characteristics of different methods, we put forward suggestions for realizing efficient and environmentally friendly production of high-purity aluminum in the future.

Aluminum ultra-purification is commonly realized through a combination of three-layer electrolytic refining and fractional crystallization, mostly using zone melting. In order to achieve a purity over 6N with the aid of zone melting, many passes have to be performed, taking several days to be accomplished. This paper focuses on a fractional crystallization methodology using a rotating and internally gas cooled crystallizer (“cooled finger”), based on a Japanese patent from the 1980s, about which no scientific investigation or publication has yet been found. This paper focuses on the impact of process conditions (mainly cooling gas flow and rotation velocity) on the growth rate of the crystallized material as well as on the reduction factor of the impurities Fe, Si, Pb, and Zn in aluminum in relationship to their initial concentration and their interaction in a multi-component system. This technique can be considered as a promising alternative for purification of aluminum as well as other metallic systems.

The increasing demand for ultra-high purity aluminum for technological applications has led to the improvement of refining methods in recent decades. To achieve ultra-purity levels (>5N), the common industrial way is to firstly purify aluminum from 2N8 up to 4N8 via three-layer electrolysis, followed by fractional crystallization (usually zone melting). Since both of these methods are very cost- and time-intensive, this paper aims at providing other alternatives of purification. For this purpose, here, the purification of some selected impurities through cooled-finger fractional crystallization method and vacuum distillation have been the focus of this investigation. Both processes are more environmentally friendly than three-layer electrolysis and require less time than zone melting. In this paper, both methods were explored for the aluminum purification. Moreover, the effect of process parameters on the purification efficiency of iron, zinc, and silicon has been investigated. At the end, the effectiveness of the two processes was compared and advantages and disadvantages were summarized. The results showed that the cooling finger process effectively removed iron and silicon impurities, but the removal efficiency of zinc was low. The vacuum distillation process successfully removes zinc in the first stage of distillation. Iron and silicon removal requires additional distillation stages to achieve lower impurity levels.

Zone refining, as the currently most common industrial process to attain ultrapure metals, is influenced by a variety of factors. One of these parameters, the so-called “zone length”, affects not only the ultimate concentration distribution of impurities, but also the rate at which this distribution is approached. This important parameter has however neither been investigated experimentally, nor ever varied for the purpose of optimization. This lack of detections may be due to the difficult temperature measurement of a moving molten area in a vacuum system, of which the zone refining methodology is comprised. Up to now, numerical simulation as a combination of complex mathematical calculations, as well as many assumptions has been the only way to reveal it. This paper aims to propose an experimental method to accurately measure the molten zone length and to extract helpful information on the thermal gradient, temperature profile and real growth rate in the zone refining of an exemplary metal, in this case aluminum. This thermographic method is based on the measurement of the molten surface temperature via an infrared camera, as well as further data analysis through the mathematical software MATLAB. The obtained results show great correlation with the visual observations of zone length and provide helpful information to determine the thermal gradient and real growth rate during the whole process. The investigations in this paper approved the application of an infrared camera for this purpose as a promising technique to automatically control the zone length during a zone refining process.

This paper focuses on the principle study and application of a fractional crystallization methodology using a rotating and internally gas cooled crystallizer (so called cooled finger, developed at IME/RWTH Aachen) first applied to the refining of germanium. For this purpose, a series of experimental trials were performed using a model metal—Aluminum—to gather the temperature profile needed for the numerical simulation that provides an initial process window used for the purification of germanium in a vacuum resistance furnace. The results of the simulation showed good agreement with the experimental results and the conducted trials based on that process window enabled the single step purification of germanium from an initial purity of 98.8% up to 99.9%.