Ya Jing Wang

Dr. Ya Jing Wang


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 February 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
XZXu Zhang
Xu Zhang
YWYa Jing Wang
Ya Jing Wang
GNGesang Nima
Gesang Nima
ZWZiqian Wang
Ziqian Wang
CHCaifeng Huang
Caifeng Huang
Pyrite and calcium sulfite were used to remove iron and manganese from an acidic aqueous solution. The concentration of Fe was decreased to be smaller than 0.05 g/L in 60 min when pyrite and air were added into the acidic aqueous solution, but the concentration of Mn in the solution remained unchanged. After the process of iron removal, calcium sulfite and air were used to remove manganese ions from the solution, and the efficiency of manganese ion removal was larger than 75% in 240 min (with less than 0.05 g/L Fe and 0.5 g/L Mn in the solution). Meanwhile, experiments were conducted to simultaneously remove iron and manganese from artificially simulated acidic leaching solution of laterite nickel ore. When the proposed method was used to purify the leaching solution of laterite nickel ore, Fe3+ and Mn2+ ions were effectively removed from the acidic solution, and the recovery efficiency of nickel and cobalt was greater than 98%.

13 December 2023 in ACS Omega
Verified
Journal Article
Open access
YWYa Jing Wang
Ya Jing Wang
XZXu Zhang
Xu Zhang
PLPeng Liu
Peng Liu
ZLZhao Liu
Zhao Liu
TRTie-Zhen Ren
Tie-Zhen Ren
ZWZiqian Wang
Ziqian Wang
Element-doped mesoporous titanium oxide has significant advantages in substance separation and adsorption due to its larger specific surface area and stronger hydrophobicity. However, its current synthesis methods have limitations such as complicated preparation process, high production cost, or not being environmentally friendly, and the synthesis of elementally doped titanium oxide materials by simple, low-cost, and green means is the research goal of this study. In this study, phosphorus-doped mesoporous titanium oxides (TiP) materials have been synthesized through a facile template-free method in an ethanol system, which were further modified by nitrogen doping with the use of urea as the nitrogen source. Both the synthesized TiP and P-N codoped sample (N-TiP) are amorphous with mesopores. It was revealed by FTIR and XPS spectra that the formation of Ti-O-P and -O-Ti-N bonds in the synthesized samples was due to the partial substitution of phosphorus for titanium in Ti-O-Ti bonds in mesoporous titanium oxide, while nitrogen replaced some oxygen in the -O-Ti-O bonds in the form of anions. The TiP sample was estimated by the BET method to have a relatively large surface area, up to 317 m(2)/g. The adsorption of TiP and N-TiP materials to lysozyme protein in a buffer solution at different pH values showed that the adsorption of TiP to lysozyme protein was larger, which was 32.68 mu mol/g. It shows that TiP has potential as a multifunctional adsorbent.

11 October 2023 in Energies
Verified
Journal Article
Open access
PDF file
PLPeng Liu
Peng Liu
YWYa Jing Wang
Ya Jing Wang
ZLZhao Liang
Zhao Liang
ZZZhikai Zhang
Zhikai Zhang
JRJun Rao
Jun Rao
SJShuai Jiang
Shuai Jiang
To prevent liquid leakage during the phase transition of a phase change material (PCM), a novel form-stable PCM (FSPCM) based on LA/CIT/CNT was fabricated using a simple and facile direct impregnation method. The iron tailings (ITs) was calcinated at first. And then lauric acid (LA) was impregnated into the calcinated iron tailings (CITs) with carbon nanotubes (CNTs) as a thermal conductivity additive. Subsequently, the leakage tests and the properties of the prepared samples were investigated by diffusion-oozing testing (DOT), SEM, XRD, FTIR, DSC, TGA, and intelligent paperless recorder (IPR). DOT results showed that the impregnation ratio of LA into the CIT and CNT was up to 27.5% without leakage. SEM indicated that LA can be adsorbed into microscale pores and covered the surface of CITs and CNTs. FTIR spectra indicated that there was no chemical reaction during the preparation process. The melting and freezing temperatures of the prepared LA/CIT/CNT FSPCMs were measured as 45.24 °C and 39.61 °C, respectively. Correspondingly, the latent heat values were determined as 39.95 J/g and 35.63 J/g, respectively. The LA/CIT/CNT FSPCMs exhibited good thermal stability in the working temperature range, and its heat transfer efficiency was improved significantly by 69.23% for LA and 84.62% for LA/CIT FSPCM. In short, LA/CIT/CNT FSPCMs are a very promising material for thermal energy storage in practical low-temperature applications.

28 July 2023 in Energies
Verified
Journal Article
Open access
PDF file
PLPeng Liu
Peng Liu
Xinglan CuiXinglan Cui
Xinglan Cui
YWYa Jing Wang
Ya Jing Wang
ZZZhikai Zhang
Zhikai Zhang
JRJun Rao
Jun Rao
XGXiaobin Gu
Xiaobin Gu
Fly ash is a kind of industrial solid waste that is considered “hazardous waste”. In this study, a supporting matrix of modified fly ash (MFA) was employed to package lauric acid (LA) via a facile direct impregnation method involving less experimental error. A low-cost and eco-friendly form-stable phase change material (PCM) of LA/MFA/graphene (G) was fabricated, with G as the thermal conductivity enhancer. The preparation and leakage testing of an LA/MFA/G form-stable PCM (FSPCM) were investigated in detail. The leakage test results indicated that good package efficiency was obtained using MFA with a higher specific surface area and richer pore structure to pack the LA. Then, LA/MFA/G composites were characterized via scanning electronic microscope (SEM), Fourier transform infrared spectroscope (FTIR), differential scanning calorimeter (DSC), and thermal gravimetric analyzer (TGA). The results showed that excellent form stability was obtained by adding MFA as the supporting matrix. The SEM analysis indicated that LA could be well dispersed into the structure of MFA. The FTIR analysis demonstrated that the components of the FSPCM were quite compatible. The results of the DSC illustrated that LA/MFA/G (5 wt. %) had a melting point of 45.38 °C and a latent heat of 41.08 J/g. The TGA analysis revealed that the prepared FSPCM had better thermal stability compared with LA within its working temperature range. In addition, the effects of G on the heat transfer performance of the prepared FSPCM were examined. In short, using MFA with a higher specific surface area and richer pore structure to pack the LA via a simple preparation process with less experimental error can contribute to good performance. The research not only improved the comprehensive utilization of solid waste, but also promotes the application of FSPCM in the field of building energy conservation.