In order to solve the problem of frequency modulation power deviation caused by the randomness and fluctuation of wind power outputs, a method of auxiliary wind power frequency modulation capacity allocation based on the data decomposition of a “flywheel + lithium battery” hybrid-energy storage system was proposed. Firstly, the frequency modulation power deviation caused by the uncertainty of wind power is decomposed by the successive variational mode decomposition (SVMD) method, and the mode function is segmented and reconstructed by high and low frequencies. Secondly, a mathematical model is established to maximize the economic benefit of energy storage considering the frequency modulation mileage, and quantum particle swarm optimization is used to solve the target model considering the charging and discharging power of energy storage and the charging state constraints to obtain the optimal hybrid-energy storage configuration. Finally, the simulation results show that, in the step disturbance, the Δf_max of the hybrid-energy storage mode is reduced by 37.9% and 15.3%, respectively, compared with single-energy storage. Under continuous disturbance conditions, compared with the single-energy storage mode, the Δf_{p_v} is reduced by 52.73%, 43.72%, 60.71%, and 47.62%, respectively. The frequency fluctuation range is obviously reduced, and the frequency stability is greatly improved.

Traditional grinding, which is predominantly performed with a negative rake angle (NRA), can be transformed into grinding with a positive rake angle (PRA) by employing femtosecond pulsed laser technology to modify the apex angle of the grains to be less than 90°. This innovative approach aims to reduce grinding forces and grinding temperatures while improving the surface quality of typical hard-to-machine materials. To assess the performance of PRA single grain grinding and to investigate the underlying mechanisms, the finite element simulation software ABAQUS 6.14 was employed to model the grinding of Ti6Al4V titanium alloy with a single diamond abrasive grain. The dependence of grinding force and temperature in single grain grinding with a PRA or an NRA under different grinding parameters was studied and compared. PRA and NRA single diamond grain grinding experiments on Ti6Al4V alloy were carried out, with grinding forces measured using a dynamometer and compared with the simulation results. The grinding surface morphology and surface roughness were observed and measured, and a comparison was made between PRA and NRA grinding. The results indicated that in single diamond grain grinding, transforming to a PRA significantly enhances grinding performance, as evidenced by reduced grinding forces, lower temperatures, improved surface morphology, and decreased surface roughness. These findings suggest that PRA single diamond grain grinding offers substantial benefits for the precision machining of hard-to-machine materials, marking a step forward in optimizing surface finishes.

Femtosecond laser machining offers high precision and minimal thermal impact, making it a promising technique for processing hard and brittle materials like single-crystal diamonds (SCDs). In this study, the femtosecond laser machining process for SCD material was systematically optimized to improve both machining efficiency and quality. Initial single-factor experiments were conducted to explore the effects of key process parameters—laser power, scanning speed, and number of scans—on machining performance. Subsequently, response surface methodology (RSM)-based experiments designed using the Box–Behnken method were employed to comprehensively refine the process. A regression model was developed to analyze the data, and the interaction effects of the parameters were thoroughly evaluated. The validated model identified an optimal set of parameters, resulting in a significant improvement in machining performance. This research provides a comprehensive framework for optimizing femtosecond laser machining processes, offering valuable insights critical for the production of advanced lightweight components in industries such as aerospace, optical instruments, and high-performance electronics.

A structure for joining thin-walled 6061-T6 aluminum alloy tube (outer tube) and Q195 steel tube (inner tube) by electromagnetic flanging process was proposed. The formation process, mechanical properties, failure modes, and morphology of the joint were investigated. The results showed that the outer tube impacted the inner tube, the flanges of the prefabricated holes on the outer tube were embedded into the prefabricated holes of the inner tube under the action of Lorentz force, and thus the mechanical locking joint was obtained. There were two tensile failure modes for the joints: Pull-out and fracture. Specifically, when the discharge energy was relatively high, the failure mode changed from pull-out to fracture. Combining the results of tensile tests and morphology observations, the maximum loads of the joints increased with the discharge energy. However, excessive discharge energy would lead to the brittle fracture of the inner tube, which was not beneficial to the service. Better discharge energy and the maximum load of the joint at this discharge energy were obtained.