The aim of this study was to investigate the effects of maleic anhydride-graft-polypropylene (MA-g-PP) as a compatibilizer and wood fiber as a lignocellulosic filler on technical properties of poly(l-lactic acid) (PLLA)/polypropylene composites. The obtained composites were characterized through mechanical tests, thermogravimetric analysis, differential scanning analyzer, and chemical analysis via Fourier transform infrared spectroscopy (FTIR), and scanning electron microscope (SEM). The obtained results showed that the mechanical properties of the composites containing MA-g-PP were higher than those of the composites without MA-g-PP. SEM images revealed that the morphological properties of the composites including PP and PLLA were improved. The chemical interactions between PP and PLLA were demonstrated through FTIR results of composites with MA-g-PP.
29 December 2023 in Mobilya ve Ahşap Malzeme Araştırmaları Dergisi
In this study, composite boards were produced using waste plastic furniture parts and wood flour. Wood flour was used at rates of 0%, 15%, 30% and 45% in the preparation of composite boards. Thus, 1 control and 3 composite groups were created. The boards are produced in dimensions of 3.5x175x175 mm (thickness, width, length). Density, flexural strength, flexural modulus, deformation at break, tensile strength, tensile modulus, elongation at break, hardness tests and thermal gravimetric analysis (TGA) and differential scanning calorimeter (DSC) analysis were performed on the produced composite boards. According to the obtained data, it was determined that as the percentage of wood flour in the composite groups increased compared to the control group, the values of flexural strength, deformation at break, tensile strength and elongation at break decreased whereas the values of density, hardness, flexural modulus and tensile modulus increased. According to the TGA and DSC analysis results, it was understood that the waste plastic furniture parts were composed of linear low density polyethylene (LLDPE) and polypropylene (PP) polymer materials, also the decomposition temperature of the composite materials partially increased with the increase in the percentage of wood flour.
9 July 2019 in Plastics, Rubber and Composites: Macromolecular Engineering
The aim of the paper was to determine the mechanical, thermal, and morphological properties of heat-treated wood-polypropylene polymer composites (WPCs) and to select the composites having the optimum properties with the PROMETHEE method. In this study, polypropylene (PP) as a matrix, wood thermally treated at 180°C and 220°C as reinforcement filler were examined for preparing composites. The PP composites were compounded using a twin-screw extruder and test specimens were prepared by compression moulding. According to the test results, the thermal and mechanical properties of the WPCs generally increased with the addition of heat-treated wood fillers. The SEM images showed that the wood fillers dispersed better in the PP matrix as the particle size decreased from 40 mesh to 100 mesh. The WPCs having the optimum mechanical and thermal properties were determined for 40 mesh heat-treated wood at 220°C and 20 wt-% loadings with PROMETHEE method.
30 November 2017 in Turkish Journal of Forestry | Türkiye Ormancılık Dergisi
Bu çalışmada yüksek yoğunluklu polietilen (YYPE) ve % 40-70 aralığında değişen oranlarda odun lifi kullanılarak odun plastik kompozit (OPK) malzemeler üretilmiştir. Üretilen bu malzemelerin çekme direnci, eğilme direnci, elastikiyet modülü ve şok direnci gibi mekanik özelliklerine lif oranın etkisi araştırılmıştır. Ayrıca bağlayıcı ajan etkisinin araştırılması için en düşük ve en yüksek odun katkı oranlarına sahip malzemeye maleik anhidrit ile muamele edilmiş polietilen (MAPE) eklenmiştir. Kompozit örnekleri laboratuvar tipi ikiz vidalı ektrüder kullanılarak üretilmiştir ve sıcak presle kalıplama yöntemi ile test levhaları hazırlanmıştır. Sonuçlar göre bağlayıcı ajan olmayan örnek grupları için genel anlamda kompozit malzeme içeriğindeki odun lifi oranının artması mekanik özelliklerdeki eğilme, çekme ve şok dirençlerini azaltırken elastikiyet modülü değerlerini artırmıştır. Ancak malzeme içeriğine bağlayıcı ajan MAPE eklenmesi mekanik özellikleri önemli ölçüde iyileştirmiş. Özellikle %70 odun lifi ve MAPE içeren kompozit örnekler, bağlayıcı içermeyen tüm örnek gruplarından daha iyi mekanik sonuçlar göstermiştir. Sonuç olarak, bu çalışma ile yüksek lif oranı ile düşük maliyetli, hafif ve estetik görünüme ve aynı zamanda iyi mekanik özelliklere sahip OPK malzemelerin üretilebileceği gösterilmiştir.