This study focuses on exploring tensile properties and nanoscale phase structures of different modified asphalts, and their aging behavior. For this, one virgin asphalt and three modified asphalts, namely, 4% SBS-modified asphalt, 2% SBS and 20% crumb rubber (CR) composite asphalt, and 4% SBS and 2%TiO₂ composite asphalt, were prepared and investigated using the force-ductility test and atomic force microscopy (AFM). Also, detailed experiments of short-term (STA) and long-term (LTA) aging were conducted to obtain aged asphalt specimens. The results showed that a ductile fracture was found for the three modified asphalts. However, for the activation energy, SBS asphalt and SBS&TiO₂ asphalt were 2.87 times and 3.31 times that of SBS&CR asphalt, respectively. This demonstrates that the activation of the SBS polymer phase requires more energy during the stretching process when the rubber powder is not present. SBS&CR asphalt and SBS&TiO₂ asphalt showed better tensile properties and aging resistance in terms of the quantitative results of tensile property indicators, indicated by a larger value of fracture ductility, tensile compliance, and the toughness ratio under the same aging condition. According to the AFM results, SBS modifier had little effect on the phase structure of virgin asphalt, while TiO₂ modifier increased the number of bee phases and made their distribution more uniform, indicating the formation of a more stable phase structure system. This may contribute to its better tensile properties and aging resistance. Moreover, TiO₂ molecules inhibited the aggregation behavior of polar molecules during the aging process, which led to a reduction in surface roughness. By comparison, the effect of aging on the phase structure of SBS&CR asphalt was more significant among the three modified asphalts. This result can be attributed to the interaction between rubber powder particles and asphalt.

The objective of this study is to recognize and characterize the nanoscale phase modulus mapping of the asphalt film in pavement mixture cores using atomic force microscopy quantitative nanomechanical technology. The pavement core samples from the upper and middle layers of four highways and laboratory samples were taken as the research object. The phase modulus–macro property correlation of recovered asphalt was analyzed using mathematical statistics. The results showed that the pavement core samples had more significant multi-phase and diversified phase characteristics compared to lab samples. This indicated that the asphalt in the pavement core had an obvious phase separation phenomenon due to aging. The phase modulus of each sample was distributed across a relatively wide numerical range, and there were also many numerical points with large fluctuations. Especially for the mixture sample containing SBS (Styrene-Butadiene-Styrene)-modified asphalt, the phase modulus distribution mappings presented a multi-peak phenomenon. Hence, considering the distribution characteristics of the data, the box plot method was introduced. Compared with quantified results from laboratory samples, the phase modulus of SBS-modified asphalt increased by 0.96 times, 1.18 times and 1.15 times, and that of base asphalt increased by 0.59 times, 0.56 times, 0.42 times, 1.24 times and 0.39 times, respectively. This indicates that the aging degree of asphalt in the upper layer was generally greater than that of the asphalt in the middle layer and that there was an aging gradient in the direction of pavement depth. All points were within the 95% confidence band in terms of correlation fitting, indicating a better fitting effect between phase modulus and complex shear modulus, as well as between phase modulus and penetration. This research provides innovative ideas for future multi-scale numerical simulation and cross-scale performance model development of asphalt binders.

Pavement texture is a crucial factor influencing both skid resistance and durability. This study aims to investigate the impact of texture reconstruction on pavement performance, which holds significant scientific value for enhancing road safety and durability. The research focuses on the reconstruction of airport cement pavement textures through the design of seven solid–liquid, two-component coating formulations, comprising three types of coatings: emulsion coating (P), waterborne epoxy coating (E), and water-based coating (W). Laser texture scanning technology was employed to identify the texture characteristics, which, combined with the British pendulum test, enabled a comprehensive analysis of skid resistance. Additionally, the coating–concrete interfacial strength and frost resistance were evaluated through pull-out tests, flexural strength tests, and freeze–thaw cycle tests. The results demonstrated that, compared to uncoated concrete, the mean profile depth (MPD) of the P, E, and W coatings increased by 43.4%, 34.7%, and 21.6%, respectively. Furthermore, the peak band of the slope spectrum density (SSD) shifted from a range greater than 1 mm to approximately 0.5 mm following coating application. The British pendulum number (BPN) increased by 25%, 20%, and 15% for the P, E and W coatings, demonstrating a strong correlation with MPD (R² = 0.95). These results indicate that the coated surface texture exhibits superior properties, which explain the enhanced slip resistance from a textural perspective. Moreover, the interfacial strength between the coating and concrete initially increased and then decreased with increasing coating thickness. In comparison, the interfacial bonding strength of the E coating was significantly higher than that of the P and W coatings. Furthermore, compared to the P and W coatings, the flexural bond strength of the E coating increased by 7% and 74%, respectively. After undergoing the freeze–thaw cycle, the E coating exhibited the best freeze resistance, while the W coating exhibited the poorest performance. In summary, the P coating excelled in texture reconstruction, while the E coating provided superior bonding and freeze resistance. This paper presents a novel approach to the development of coating materials for use on airport pavements.